See Ios

Configure wireless network (eduroam)

CONFIGURE WIRELESS NETWORK (EDUROAM)

INTRODUCTION

This manual describes how you can configure a mobile phone with the operating system iPod and iPhone to use the eduroam network of the UT.

BEFORE YOU START

  • The manual has been written for iPad air with iOS 9.2. The steps are almost identical for other mobile phones iPhone or other versions of iOS-versions (newer than iOS 9.0).
  • Make sure Airplane Mode is disabled and Wi-Fi is enabled.
  • This manual uses a consistent style of writing: references to text and buttons on screens are printed in italics, information that you have to enter yourself is printed in bold.  

CONFIGURING EDUROAM

STEP 1: SETTINGS

  • Press Settings.

IMG_0004

STEP 2: NETWORK CONNECTION

  • Press eduroam on the screen Wi-Fi.

IMG_0005

STEP 3: ENTER CREDENTIALS

  • In the first field, enter your student number followed by @utwente.nl (e.g. s0123456@utwente.nl) for employees enter your (UT) e-mail address.
  • In the second field enter your password.
  • Click 'Join'.

STEP 4: CHECK AND ACCEPT CERTIFICATE

Make sure the Certificates servername is radius.utwente.nl.

IMG_0007

Click Trust (top right).

STEP 5: YOU ARE NOW CONNECTED

IMG_0008