Jump to: 2026 | 2025 | 2024 | 2023 | 2022
2026
A biofidelic in vitro model to determine the tribological behaviour of mucous layers and their influence on tissue damage (2026)Journal of the mechanical behavior of biomedical materials, 181. Article 107528. Gamaniel, S. S., Canden-Eastwood, A., Davison, S., Matthews, D. T. A., Carré, M., Lewis, R. & van der Heide, E.https://doi.org/10.1016/j.jmbbm.2026.107528A method to predict the mesoscale contact area for discrete human skin-product surface contacts (2026)Friction, 14(9). Article 9441253. Shang, F., de Vries, E. G., Gamaniel, S. S., Matthews, D. T. A. & van der Heide, E.https://doi.org/10.26599/FRICT.2026.9441253Modelling the 3D geometrical structure of carbon black aggregates as filler in rubber compounds (2026)Carbon trends, 24. Article 100680. Karaseva, E., Gitman, I. M., Blume, A., Bor, T. C. & Huang, D.https://doi.org/10.1016/j.cartre.2026.100680On the origin of superlattice stacking faults nucleation via climb of Frank partial in CoNi-based superalloys (2026)Acta materialia, 316. Article 122471. Liang, Z., Cui, Y., Wang, L., Liu, X., Liu, B., Liu, Y. & Liu, F.https://doi.org/10.1016/j.actamat.2026.122471Structural Materials for Molten Salt Reactors: A Review of Coupled Irradiation and Corrosion Resistance (2026)Journal of Materials Research and Technology, 44, 1168-1193. Yan, C., Zhang, L., Maresca, F., Giuntini, D. & Liu, F.https://doi.org/10.1016/j.jmrt.2026.08.047Computational analysis of the mechanical behaviour of flake-based recycled composites (2026)Composites Part C: Open Access, 21. Article 100793 (E-pub ahead of print/First online). Nazemzadeh, N., Liu, F., Akkerman, R. & Gitman, I. M.https://doi.org/10.1016/j.jcomc.2026.100793Finite-beam modeling of non-collinear wave mixing in bounded media (2026)NDT & E international, 163. Article 103801. Rouwhorst, E., Gitman, I. M., Loendersloot, R. & Yntema, D.https://doi.org/10.1016/j.ndteint.2026.103801Benchmarking chemically scalable machine-learning interatomic potentials for large-scale simulations of multicomponent alloys (2026)Physical Review Materials, 10(7). Article 073802. Shuang, F., Ying, P., Liu, K., Wei, Z., Liu, F., Fan, Z., Jiang, M. & Dey, P.https://doi.org/10.1103/1qc9-ypybHigh-Ti induced planar-fault transformation toward superlattice extrinsic stacking faults and microtwins in crept CoNi-based superalloys (2026)International journal of plasticity, 202. Article 104705. Liang, Z., Xu, X., Liu, F., Zhang, X., Liu, X., Zhang, M., Wang, L., Zhang, J., Pyczak, F. & Cui, Y.https://doi.org/10.1016/j.ijplas.2026.104705Tribological behaviour of polymer materials: Mechanisms, influencing factors, and control strategies (2026)Journal of Polymer Research, 33(7). Article 287. Ge, G., Wu, Y., He, Z., Wang, S. & van der Heide, E.https://doi.org/10.1007/s10965-026-05008-zInterface-level mechanisms of plant protein particles on friction and damage in in vitro biofidelic epithelial models (2026)Friction (E-pub ahead of print/First online). Gamaniel, S. S., Canden-Eastwood, A., Davison, S., Vreeker, R., Matthews, D. T. A., Carré, M. J., Lewis, R. & van der Heide, E.https://doi.org/10.26599/FRICT.2026.9441270Friction law and contact oscillations on non-adhesive rough surface (2026)Tribology international, 222. Article 112170 (E-pub ahead of print/First online). Huang, K., Liu, F., Yao, H., Ma, H. & Hu, J.https://doi.org/10.1016/j.triboint.2026.112170Superior high-temperature mechanical properties of crack-free IN738LC superalloy additively manufactured by L-DED via novel self-adjustable baseplate optimization (2026)Materials & Design, 264. Article 115776. Ma, L., Chai, H., Lu, X., Hu, Y., Wang, M., Liu, F. & Lin, X.https://doi.org/10.1016/j.matdes.2026.115776Dataset: Machine-Learning Interatomic Potentials for Million-Atom Simulations of Multicomponent Alloys (2026)[Dataset Types › Dataset]. Zenodo. Shuang, F., Ying, P., Liu, K., Wei, Z., Liu, F., Fan, Z. & Dey, P.https://doi.org/10.5281/zenodo.19187063Bonding mechanisms in directly bonded aluminium and glass-fibre polyamide 6 hybrids (2026)Composites Part C: Open Access, 19. Article 100702. Adelinia, A., Yerokhin, A., Matthews, D. T. A., Warnet, L., de Rooij, M. B. & Zanjani, J. S. M.https://doi.org/10.1016/j.jcomc.2026.100702Segregation-driven cross-slip mechanism of Shockley partials in the γ' phase of CoNi-based superalloys (2026)International journal of plasticity, 198. Article 104612. Liang, Z., Liu, F., Liu, X., Li, Y., Cui, Y. & Pyczak, F.https://doi.org/10.1016/j.ijplas.2026.104612A Data‐Driven Quest for Room‐Temperature Bulk Plastically Deformable Ceramics (2026)Journal of the American Ceramic Society, 109(2). Article e70577. Słodczyk, I., Frisch, A., Fang, X., Gitman, I. & Liu, F.https://doi.org/10.1111/jace.70577Plasma electrolytic oxidation coating for aluminium and glass-fibre polyamide 6 bonding (2026)Composites Part A: Applied Science and Manufacturing, 201. Article 109445. Adelinia, A., Yerokhin, A., Matthews, D. T. A., Warnet, L., de Rooij, M. B. & Seyyed Monfared Zanjani, J.https://doi.org/10.1016/j.compositesa.2025.109445Halide solid electrolytes: composition tuning, structural design, and performance optimization for all-solid-state lithium batteries (2026)Journal of Materials Chemistry A, 14(1), 180-220. Wu, Y., Ge, G., Wang, S., Zhu, J. & Zhuang, X.https://doi.org/10.1039/d5ta07277h
2025
Tribo-mechanical stability of mucous boundary layers in biofidelic contacts (2025)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Gamaniel, S. S.https://doi.org/10.3990/1.9789036569989Curved Riblet Tips for Drag Reduction in Water Pipes (2025)Journal of Fluid Flow, Heat and Mass Transfer, 12, 397-403. Chehrghani, M. M., Yntema, D., Matthews, D., Rooij, M. d. & Seyyed Monfared Zanjani, J.https://doi.org/10.11159/jffhmt.2025.039Data-driven approaches for predicting mechanical properties and determining processing parameters of selective laser sintered nylon-12 components (2025)Discover Mechanical Engineering, 4(1). Article 10. Tu, R., Majewski, C. & Gitman, I.https://doi.org/10.1007/s44245-025-00094-7Shark-inspired riblet design and optimization for drag reduction in drinking water distribution pipes across varying flow rates (2025)Water research X, 29. Article 100412. Mohammadpour Chehrghani, M., Seyyed Monfared Zanjani, J., Yntema, D., Matthews, D. & de Rooij, M.https://doi.org/10.1016/j.wroa.2025.100412A data-driven quest for room-temperature bulk plastically deformable ceramics (2025)[Working paper › Preprint]. ArXiv.org. Słodczyk, I., Frisch, A., Fang, X., Gitman, I. & Liu, F.https://doi.org/10.48550/arXiv.2511.03815HiPIMS: Pioneering the Future of Thin Films (2025)Vacuum Technology & Coating, 2025(Nov.). Ganesan, R., Linford, M., Pinder, J., He, J.-L. & Matthews, D. T. A.https://www.vtcmag.com/Special Issue “Multifunctional Surfaces and Coatings” – Preface (2025)Surface and coatings technology, 515. Article 132618. Petrov, I., Bilek, M. M., Ganesan, R., Matthews, D. T. A. & Stueber, M.https://doi.org/10.1016/j.surfcoat.2025.132618Synergistic enhancement of strength and ductility in Arc-DED Al-Cu alloys via in-situ liquid nitrogen cooling-induced grain structure heterogeneity and porosity suppression (2025)Additive manufacturing, 112. Article 105002. Wang, Z., Che, S., Lu, X., Hao, Z., Zhang, T., Hu, C., Feng, Z., Yang, H., Wang, X., Liu, F. & Lin, X.https://doi.org/10.1016/j.addma.2025.105002Hierarchical Riblet Structures for Enhanced Drag Reduction and Broader Operational Range in Water Pipelines (2025)ACS ES&T Water, 5(10), 6030-6040. Mohammadpour Chehrghani, M., Seyyed Monfared Zanjani, J., Yntema, D., Matthews, D. & de Rooij, M.https://doi.org/10.1021/acsestwater.5c00703Shark skin-inspired surface designs for drag reduction in drinking water distribution pipes (2025)Water research, 284. Article 123965. Mohammadpour Chehrghani, M., Yntema, D., Matthews, D., de Rooij, M. & Seyyed Monfared Zanjani, J.https://doi.org/10.1016/j.watres.2025.123965Characterising influences on wear of tyre tread compounds (2025)[Contribution to conference › Abstract] International Rubber Conference 2025. Hoeksma, M. A. E., Kaewsakul, W., de Vries, E. G., van der Heide, E., Bernal-Ortega, P., Matthews, D. T. A. & Blume, A.Influence of plant-based compounds on the structural stability of mucous boundary layers in tribological contact (2025)Tribology international, 209. Article 110688. Gamaniel, S. S., de Vries, E. G., Tromp, R. H., de Hoog, E. H. A., Vreeker, R., Matthews, D. T. A. & van der Heide, E.https://doi.org/10.1016/j.triboint.2025.110688An investigation into the evolution of surface topography and contact characteristics of rolling elements under repeated rolling contact (2025)Tribology international, 208. Article 110644. Gargourimotlagh, M., Matthews, D. T. A. & de Rooij, M. B.https://doi.org/10.1016/j.triboint.2025.110644Effect of plant-based compounds on mucous boundary layer lubrication during tribological contact (2025)[Contribution to conference › Paper] 9th European Conference on Tribology, ECOTRIB 2025. Gamaniel, S. S., Matthews, D. T. A. & van der Heide, E.Insights in the interaction between roughness reduction and fatigue crack growth in rolling contacts (2025)Engineering failure analysis, 174. Article 109493. Gargourimotlagh, M., Matthews, D. T. A., Schneider, S. & de Rooij, M. B.https://doi.org/10.1016/j.engfailanal.2025.109493The impact of surface cracks and surface roughness in the performance of hard chromium coatings in cold rolling applications (2025)Applied Surface Science Advances, 27. Article 100738. Ranjbar-Nouri, Z., Matthews, D., Bolt, H. & de Rooij, M.https://doi.org/10.1016/j.apsadv.2025.100738Improved Lateral Resistance Test: Investigating the Effect of a Partial Uplift Restraint during a Single Sleeper Push Test (2025)Transportation research record, 2679(4), 554-569. Słodczyk, I., Whittle, J., Fletcher, D., Gitman, I., Danks, S. & Whitney, B.https://doi.org/10.1177/03611981241295705Influence of environment on wetting properties of common polymers for Skin-Device Interfaces (2025)[Contribution to conference › Abstract] 10th Dutch Biomedical Engineering Conference, BME 2025. Reuvekamp, H., Hekman, E. E. G., van der Heide, E. & Matthews, D. T. A.Impact of Curved Riblet Tips on Turbulent Drag Reduction in Pipes (2025)In Proceedings of the 11th World Congress on Mechanical, Chemical, and Material Engineering (MCM 2025) (pp. 132-1-132-7). Article HTFF 132 (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering; Vol. 2025). Avestia Publishing. Chehrghani, M. M., Yntema, D., Matthews, D., de Rooij, M. & Zanjani, J. S. M.https://doi.org/10.11159/htff25.132Interface issues between cathode and electrolyte in sulfide-based all-solid-state lithium batteries and improvement strategies of interface performance through cathode modification (2025)Materials research bulletin, 181. Article 113078. Wang, C., Wu, Y., Wang, S., van der Heide, E. & Zhuang, X.https://doi.org/10.1016/j.materresbull.2024.113078
2024
Effects of sodium ions on the tribological and antioxidation properties of borates (2024)Tribology international, 199. Article 110032. Wu, Y., van der Heide, E. & Wang, S.https://doi.org/10.1016/j.triboint.2024.110032How To Predict Truck Tyre Wear (2024)[Contribution to conference › Abstract] 15th Fall Rubber Colloquium: KHK. Hoeksma, M., Kaewsakul, W., van der Heide, E., Matthews, D. T. A. & Blume, A.Insights in the wettability of hard chromium coated steel for cold rolling applications (2024)Results in Engineering, 23. Article 102815. Ranjbar Nouri, Z., Matthews, D. T. A., Bolt, H. & de Rooij, M.https://doi.org/10.1016/j.rineng.2024.102815Reducing Feature Size in Laser Implantation Texturing (2024)Micromachines, 15(8). Article 958. Ettema, B., Matthews, D. & Römer, G.-W.https://doi.org/10.3390/mi15080958A tribo-chemical view on astringency of plant-based food substances (2024)Friction, 12, 1392-1407. Gamaniel, S. S., Dueñas Robles, P. S., Tromp, H., de Hoog, E. H. A., de Beer, S. & van der Heide, E.https://doi.org/10.1007/s40544-023-0812-0Adhesive-Free Metal-Thermoplastic Bonding by Plasma Electrolytic Oxidation (PEO) (2024)[Contribution to conference › Poster] MS3 DAY 2024. Adelinia, A., Yerokhin, A., Matthews, D. T. A., de Rooij, M. B. & Seyyed Monfared Zanjani, J.Carbon nanomaterials-constructed electrodes for rechargeable metal-ion batteries (2024)Journal of Energy Storage, 90. Article 111900. Ge, G., Wu, Y., van der Heide, E., Chen, Z., Zhu, J. & Zhuang, X.https://doi.org/10.1016/j.est.2024.111900The modified boundary layer mechanism for the release between polyimide film and poly(ether ketone ketone) thermoplastics (2024)Journal of applied polymer science, 141(20). Article e55377. Yang, Z., Dissevelt, T., Li, N., de Vries, E., Grouve, W., Bao, N., de Rooij, M., Akkerman, R. & Chu, L.https://doi.org/10.1002/app.55377Vacancies making jerky flow in complex alloys (2024)[Working paper › Preprint]. ArXiv.org. Liang, Z., Liu, F., Wang, L., You, Z., Zhong, F., Cocks, A. & Pyczak, F.https://doi.org/10.48550/arXiv.2405.02890Room-temperature sputter deposition of gold-colored TiN assisted by niobium bombardment from a bipolar HiPIMS source (2024)Journal of vacuum science & technology A: vacuum, surfaces, and films, 42(2). Article 023107. Fernández-Martinez, I., Ganesan, R., Akhavan, B., Matthews, D. T. A., Stueber, M., Bilek, M. M. M. & McKenzie, D. R.https://doi.org/10.1116/6.0003325Strategies in surface engineering for the regulation of microclimates in skin-medical product interactions (2024)Heliyon, 10(4). Article e25395. Reuvekamp, H., Hekman, E. E. G., Heide, E. v. d. & Matthews, D. T. A.https://doi.org/10.1016/j.heliyon.2024.e25395Performance of textured dual mobility total hip prosthesis with a concave dimple during Muslim prayer movements (2024)Scientific reports, 14(1). Article 916. Muchammad, M., Tauviqirrahman, M., Ammarullah, M. I., Iqbal, M., Setiyana, B. & Jamari, J.https://doi.org/10.1038/s41598-023-50887-7Direct observation of the fracture behavior of the polyether ketone ketone (PEKK) spherulites (2024)Journal of applied polymer science, 141(1). Article e54764. Marinosci, V., Chen, K., Helthuis, N. G. J., Grouve, W. J. B., Vries, E. G. d., Bao, N., Akkerman, R., Rooij, M. B. d. & Chu, L.https://doi.org/10.1002/app.54764The effect of coating characteristics on implant-bone interface mechanics (2024)Journal of biomechanics, 163. Article 111949. Sánchez, E., de Vries, E., Matthews, D., van der Heide, E. & Janssen, D.https://doi.org/10.1016/j.jbiomech.2024.111949
2023
Analysis of contact pressure in a 3D model of dual-mobility hip joint prosthesis under a gait cycle (2023)Scientific reports, 13(1). Article 3564. Tauviqirrahman, M., Ammarullah, M. I., Jamari, J., Saputra, E., Winarni, T. I., Kurniawan, F. D., Shiddiq, S. A. & van der Heide, E.https://doi.org/10.1038/s41598-023-30725-6Bioactive calcium phosphate coatings applied to flexible poly(carbonate urethane) foils (2023)Surface and coatings technology, 470. Article 129838. Farjam, P., Luckabauer, M., Vries, E. G. d., Rangel, V. R., Hekman, E. E. G., Verkerke, G. J. & Rouwkema, J.https://doi.org/10.1016/j.surfcoat.2023.129838Friction of biomechanical interfaces (2023)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. de Vries, E. G.https://doi.org/10.3990/1.9789036558242Metal substrate provided with tailored surface textures and method for applying such textures on metal substrates (2023)[Patent › Patent]. Baart, P., Bottema, J. & Matthews, D. T. A.Microbubble on fiber method to determine the contact angle between steel substrates and highly viscous molten PEKK and PA 6 (2023)Journal of applied polymer science, 140(24), 1-9. Article e53945. Chen, K., Chu, L., Grouve, W. J. B., de Vries, E. G., Akkerman, R., Bao, N. & de Rooij, M. B.https://doi.org/10.1002/app.53945Interface Optimization in Metal-Thermoplastic Hybrid Joints: The Effect of Surface Treatment (2023)[Contribution to conference › Poster] MS3 Day 2023. Adelinia, A., Seyyed Monfared Zanjani, J., Matthews, D. T. A. & de Rooij, M. B.Tribological behaviour of a synthetic synovial fluid and polyurethane in biomedical implants (2023)Biotribology, 33-34. Article 100242. de Vries, E. G., van Minnen, B. S., Wu, Y., Matthews, D. T. A. & van der Heide, E.https://doi.org/10.1016/j.biotri.2023.100242Stick-slip behaviour in sliding rubber contacs (2023)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Budi Setiyana, B.https://doi.org/10.3990/1.9789036555005Pulse length selection in bipolar HiPIMS for high deposition rate of smooth, hard amorphous carbon films (2023)Surface and coatings technology, 454. Article 129199. Ganesan, R., Fernández-Martinez, I., Akhavan, B., Matthews, D. T. A., Sergachev, D., Stueber, M., McKenzie, D. R. & Bilek, M. M. M.https://doi.org/10.1016/j.surfcoat.2022.129199Regulating Microclimates in Biomedical Product Interfaces by Surface Engineering (2023)[Contribution to conference › Poster] 9th Dutch Bio-Medical Engineering Conference, BME 2023. Reuvekamp, H., Hekman, E. E. G., Matthews, D. T. A. & van der Heide, E.Design of a tongue equivalent for astringency assessment of plant based proteins (2023)[Thesis › EngD Thesis]. University of Twente. Gamaniel, S. S.https://doi.org/10.3990/1.9789036555173Atomic configuration, electronic structure, and work of adhesion of TiN(111)//B2-NiTi(110) and TiN(111)//B19′-NiTi(010) interfaces: Insights from first-principles simulations (2023)Surface and interface analysis, 55(1), 41-51. Xie, D., Wang, X., Wei, L., Zhang, R., Ganesan, R., Matthews, D. T. A. & Leng, Y.https://doi.org/10.1002/sia.7158
2022
Adopted walking condition for computational simulation approach on bearing of hip joint prosthesis: review over the past 30 years (2022)Heliyon, 8(12). Article e12050. Jamari, J., Ammarullah, M. I., Santoso, G., Sugiharto, S., Supriyono, T., Permana, M. S., Winarni, T. I. & van der Heide, E.https://doi.org/10.1016/j.heliyon.2022.e12050In Silico Contact Pressure of Metal-on-Metal Total Hip Implant with Different Materials Subjected to Gait Loading (2022)Metals, 12(8). Article 1241. Jamari, J., Ammarullah, M. I., Santoso, G., Sugiharto, S., Supriyono, T. & Heide, E. v. d.https://doi.org/10.3390/met12081241