Journal papers and conference contributions
Jump to: 2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2015 | 2012 | 2001
2025
Insights in the interaction between roughness reduction and fatigue crack growth in rolling contacts (2025)Engineering failure analysis, 174. Article 109493. Gargourimotlagh, M., Matthews, D. T. A., Schneider, S. & de Rooij, M. B.https://doi.org/10.1016/j.engfailanal.2025.109493The impact of surface cracks and surface roughness in the performance of hard chromium coatings in cold rolling applications (2025)Applied Surface Science Advances, 27. Article 100738. Ranjbar-Nouri, Z., Matthews, D., Bolt, H. & de Rooij, M.https://doi.org/10.1016/j.apsadv.2025.100738Effect of thermal aging on the grease film thickness in ball bearings (2025)Tribology international, 204. Article 110511. Cen, H., de Laurentis, N., Bader, N. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2025.110511An investigation into the evolution of surface topography and contact characteristics of rolling elements under repeated rolling contact (2025)Tribology international, 208. Article 110644 (E-pub ahead of print/First online). Gargourimotlagh, M., Matthews, D. T. A. & de Rooij, M. B.https://doi.org/10.1016/j.triboint.2025.110644Towards lifetime lubrication of wind turbine gearboxes: Technical and physical investigations on used oils (2025)Wear. Article 205760 (E-pub ahead of print/First online). Liu, M., Bayer, G., Reimers, M., Schünemann, W., König, F., Jacobs, G., Schelenz, R., Bader, N., Poll, G. & Marian, M.https://doi.org/10.1016/j.wear.2025.205760Pore formation and pore inter-connectivity in plasma electrolytic oxidation coatings on aluminium alloy (2025)Surface and coatings technology, 496. Article 131597. Adelinia, A., Yerokhin, A., Matthews, D. T. A., de Rooij, M. B. & Zanjani, J. S. M.https://doi.org/10.1016/j.surfcoat.2024.131597
2024
When Grease Fails (2024)[Contribution to conference › Poster] M2i conference 2024. Hogenberk, F., van den Ende, D., de Rooij, M. B. & Lugt, P. M.Effect of normal load and bulk strain on real area of contact in aluminum sheet forming (2024)[Contribution to conference › Poster] 27th Engineering Mechanics Symposium, EM 2024. Jalalimoghadas, F., de Rooij, M. B., van den Boogaard, T. & Hazrati, J.Understanding the wear mechanism of FKM seals in load lock gate valve (2024)[Contribution to conference › Poster] 15th Fall Rubber Colloquium: KHK. Itani, S., Seyyed Monfared Zanjani, J., Bernal-Ortega, P., Kaewsakul, W., Blume, A. & de Rooij, M. B.Insights in the wettability of hard chromium coated steel for cold rolling applications (2024)Results in Engineering, 23. Article 102815. Ranjbar Nouri, Z., Matthews, D. T. A., Bolt, H. & de Rooij, M.https://doi.org/10.1016/j.rineng.2024.102815A Coarse Grained Molecular Dynamics Model for the Simulation of Lubricating Greases (2024)Tribology letters, 72. Article 78. Benois, A., Echeverri Restrepo, S., De Laurentis, N., Hogenberk, F., Giuntoli, A. & Lugt, P. M.https://doi.org/10.1007/s11249-024-01878-wA Quantitative Method to Measure Oil-Separation Properties of Lubricating Greases (2024)Tribology letters, 72(3). Article 102. Hogenberk, F., van den Ende, D., de Rooij, M. B. & Lugt, P. M.https://doi.org/10.1007/s11249-024-01900-1Influence of the meniscus on wear in grease-lubricated oscillating rolling contacts (2024)Tribology international, 197. Article 109771. Bayer, G., Wandel, S., Ayromlou, A., Bader, N. & Poll, G.https://doi.org/10.1016/j.triboint.2024.109771Replicating the rolling-sliding dynamics of cam-roller contacts in large-scale hydraulic drivetrains: A small-scale approach (2024)Proceedings of the Institution of Mechanical Engineers. Part J: Journal of engineering tribology, 238(8), 971-987. Amoroso, P., van Ostayen, R. A. J. & de Rooij, M. B.https://doi.org/10.1177/13506501241242185The effect of highly elongated micro-contacts on rolling contact stress field (2024)Tribology international, 196. Article 109744. Gargourimotlagh, M. & de Rooij, M. B.https://doi.org/10.1016/j.triboint.2024.109744A tribo-chemical view on astringency of plant-based food substances (2024)Friction, 12, 1392-1407. Gamaniel, S. S., Dueñas Robles, P. S., Tromp, H., de Hoog, E. H. A., de Beer, S. & van der Heide, E.https://doi.org/10.1007/s40544-023-0812-0Adhesive-Free Metal-Thermoplastic Bonding by Plasma Electrolytic Oxidation (PEO) (2024)[Contribution to conference › Poster] MS3 DAY 2024. Adelinia, A., Yerokhin, A., Matthews, D. T. A., de Rooij, M. B. & Seyyed Monfared Zanjani, J.Systems and Methods for Transformation and Degradation Analysis (2024)Entropy, 26(6). Article 454. Osara, J. A. & Bryant, M. D.https://doi.org/10.3390/e26060454The modified boundary layer mechanism for the release between polyimide film and poly(ether ketone ketone) thermoplastics (2024)Journal of applied polymer science, 141(20). Article e55377. Yang, Z., Dissevelt, T., Li, N., de Vries, E., Grouve, W., Bao, N., de Rooij, M., Akkerman, R. & Chu, L.https://doi.org/10.1002/app.55377A mesoscopic model for inter-yarn friction (2024)Composites Part A: Applied Science and Manufacturing, 180. Article 108070. Vu, A. N., Grouve, W. J. B., Rooij, M. B. d. & Akkerman, R.https://doi.org/10.1016/j.compositesa.2024.108070Vibrations and film thickness in grease-lubricated deep groove ball bearings (2024)Tribology international, 193. Article 109325. Shetty, P., Meijer, R. J., Osara, J. A., Pasaribu, R. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2024.109325Tribology of the Low Countries (2024)[Contribution to conference › Poster] Tribology of the Low Countries 2024. Allan, O.Effect of rope twist and strand twist on the contact pressure between strands in Aramid fibre three-strand ropes (2024)[Contribution to conference › Paper] International Organization for the Study of Rope (OIPEEC) Conference 2024. Allan, O., Mishra, T. & de Rooij, M. B.Contribution of viscous shear to friction in cold rolling of low-carbon steel (2024)Tribology international, 191. Article 109102. Jacobs, L. J. M., van der Lugt, J. & de Rooij, M. B.https://doi.org/10.1016/j.triboint.2023.109102Methods to Calculate Entropy Generation (2024)Entropy, 26(3). Article 237. Osara, J. A. & Bryant, M. D.https://doi.org/10.3390/e26030237Probing the relation between polymer brushes wetting transitions and bulk polymer phase transition (2024)[Contribution to conference › Poster] NWO Physics 2024. Buonaiuto, L., Reuvekamp, S., Kap, Ö., van den Ende, D., de Beer, S., Lugt, P. M. & Mugele, F.Direct observation of the fracture behavior of the polyether ketone ketone (PEKK) spherulites (2024)Journal of applied polymer science, 141(1). Article e54764. Marinosci, V., Chen, K., Helthuis, N. G. J., Grouve, W. J. B., Vries, E. G. d., Bao, N., Akkerman, R., Rooij, M. B. d. & Chu, L.https://doi.org/10.1002/app.54764Effect of Grease Filling on the Film Thickness in Deep-Groove Ball Bearings (2024)Tribology transactions, 67(1), 62-69. Shetty, P., Meijer, R. J., Osara, J. A., Pasaribu, R. & Lugt, P. M.https://doi.org/10.1080/10402004.2023.2282632Grease material properties from first principles thermodynamics (2024)Lubrication science, 36(1), 36-50. Osara, J. A., Chatra, S. & Lugt, P. M.https://doi.org/10.1002/ls.1672On the Required Energy to Break Down the Thickener Structure of Lubricating Greases (2024)Tribology transactions, 67(1), 123-128. Meijer, R. J., Osara, J. A. & Lugt, P. M.https://doi.org/10.1080/10402004.2023.2297041
2023
Remaining Grease Life (2023)[Contribution to conference › Poster] M2i Conference 2023. Hogenberk, F., van den Ende, D., de Rooij, M. B. & Lugt, P. M.Analysis of contact pressure in a 3D model of dual-mobility hip joint prosthesis under a gait cycle (2023)Scientific reports, 13(1). Article 3564. Tauviqirrahman, M., Ammarullah, M. I., Jamari, J., Saputra, E., Winarni, T. I., Kurniawan, F. D., Shiddiq, S. A. & van der Heide, E.https://doi.org/10.1038/s41598-023-30725-6Thermo-hydrodynamic Analysis of Multistep Journal Bearing using Computational Fluid Dynamics Simulation (2023)CFD Letters, 15(12), 117-134. Muchammad, M., Tauviqirrahman, M., Ega, A. D. D., Setiyana, B. & Jamari, J.https://doi.org/10.37934/cfdl.15.12.117134A Novel Tribometer and a Comprehensive Testing Method for Rolling-Sliding Conditions (2023)Machines, 11(11). Article 993. Amoroso, P., Vrček, A. & de Rooij, M.https://doi.org/10.3390/machines11110993Studying the real area of contact to develop a friction mode (2023)[Contribution to conference › Poster] 26th Engineering Mechanics Symposium, EMS 2023. Jalalimoghadas, F., de Rooij, M. B., van den Boogaard, T. & Hazrati, J.Impact of oxidation on grease life in rolling bearings (2023)Tribology international, 188. Article 108785. Lugt, P. M., Holgerson, M. & Reinholdsson, F.https://doi.org/10.1016/j.triboint.2023.108785Quantification of the In fluence of anisotropic plastic yielding on cold rolling force (2023)Journal of materials processing technology, 319. Article 118055. Jacobs, L. J. M., Atzema, E. H., Moerman, J. & de Rooij, M. B.https://doi.org/10.1016/j.jmatprotec.2023.118055Numerical Study of Comparison of Thrust Bearing Slip-No Slip Condition on Acoustic Performance (2023)CFD Letters, 15(9), 1-17. Syafaat, I., Sari, L. R., Muchammad, M., Tauviqirrahman, M., Yohana, E., Jamari, J. & Setiyana, B.https://doi.org/10.37934/cfdl.15.9.117Microbubble on fiber method to determine the contact angle between steel substrates and highly viscous molten PEKK and PA 6 (2023)Journal of applied polymer science, 140(24), 1-9. Article e53945. Chen, K., Chu, L., Grouve, W. J. B., de Vries, E. G., Akkerman, R., Bao, N. & de Rooij, M. B.https://doi.org/10.1002/app.53945Interface Optimization in Metal-Thermoplastic Hybrid Joints: The Effect of Surface Treatment (2023)[Contribution to conference › Poster] MS3 Day 2023. Adelinia, A., Seyyed Monfared Zanjani, J., Matthews, D. T. A. & de Rooij, M. B.Designer Adhesives for Tough and Durable Interfaces in High-Performance Ti-Carbon PEKK Hybrid Joints (2023)Advanced materials interfaces, 10(17). Article 2202460. Kafkopoulos, G., Marinosci, V. M., Duvigneau, J., Grouve, W. J. B., Wijskamp, S., de Rooij, M. B., Vancso, G. J. & Akkerman, R.https://doi.org/10.1002/admi.202202460The lubrication mechanism behind the transition from churning to bleeding in grease lubricated bearings – Experimental characterization (2023)Tribology international, 183. Article 108375. Sathwik Chatra, K. R., Osara, J. A. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2023.108375Analysis of the effect of ventilation hole angle and material variation on thermal behavior for car disc brakes using the finite element method (2023)Results in Engineering, 17. Article 100844. Tauviqirrahman, M., Muchammad, M., Setiazi, T., Setiyana, B. & Jamari, J.https://doi.org/10.1016/j.rineng.2022.100844Experimental study of contact angle and surface energy of a single aramid fibre and its relation on frictional behaviour of fibre-fibre contact (2023)Jurnal Tribologi, 36, 43-56. Ismail, N., de Rooij, M. B., Schipper, D. J. & Zini, N. H. M.https://jurnaltribologi.mytribos.org/v36.htmlThermo-mechanical aging during churning in grease lubricated bearings and its impact on grease life (2023)Tribology international, 181. Article 108248. Sathwik Chatra, K. R., Osara, J. A. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2023.108248Wear Development in Oscillating Rolling Element Bearings (2023)Lubricants, 11(3). Article 117. Wandel, S., Bartschat, A., Glodowski, J., Bader, N. & Poll, G.https://doi.org/10.3390/lubricants11030117The effect of heating stage parameters on AlSi coating microstructure and fracture at high temperatures (2023)Materials Science & Engineering A, 865. Article 143812. Zaman, S. B., Hazrati, J., de Rooij, M. B. & van den Boogaard, T.https://doi.org/10.1016/j.msea.2022.143812On the evolution of oil-separation properties of lubricating greases under shear degradation (2023)Tribology international, 179. Article 108154. Hogenberk, F., Osara, J. A., Ende, D. v. d. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2022.108154On the use of the Arrhenius equation to describe the impact of temperature on grease life (2023)Tribology international, 179. Article 108142. Lugt, P. M.https://doi.org/10.1016/j.triboint.2022.108142Unravelling the interphase - bond strength relationship in novel co-bonded thermoplastic - thermoset hybrid composites for leading edge protection of wind turbine blades (2023)Polymer testing, 117. Article 107856. Erartsin, O., Zanjani, J. S. M. & Baran, I.https://doi.org/10.1016/j.polymertesting.2022.107856
2022
Oil Separation in Lubricating Greases (2022)[Contribution to conference › Poster] M2i Conference 2022. Hogenberk, F., Osara, J. A., van den Ende, D. & Lugt, P. M.Impact of grease churning on grease leakage, oil bleeding and grease rheology (2022)Tribology international, 176. Article 107926. Chatra, K. R. S., Osara, J. A. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2022.107926Characterization of the water–titanium interaction and its effect on the adhesion of titanium-C/PEKK joints (2022)Composites Part A: Applied Science and Manufacturing, 162. Article 107107. Marinosci, V. M., Chu, L., Grouve, W. J. B., Wijskamp, S., Akkerman, R. & Rooij, M. B. d.https://doi.org/10.1016/j.compositesa.2022.107107Effect of asymmetric material entrance on lubrication in cold rolling (2022)Tribology international, 175. Article 107810. Jacobs, L. J. M., van Dam, K. N. H., Wentink, D. J., de Rooij, M. B., van der Lugt, J., Schipper, D. J. & Hoefnagels, J. P. M.https://doi.org/10.1016/j.triboint.2022.107810Multi-scale friction model for Aluminum sheet metal forming (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Jalalimoghadas, F., Hazrati, J., van den Boogaard, T. & de Rooij, M. B.Synergistically enhancing the performance of cardanol-rich epoxy anticorrosive coatings using cardanol-based reactive diluent and its functionalized graphene oxide (2022)Progress in organic coatings, 171. Article 107060. Zhang, Y., Chu, L., Dai, Z., Bao, N., de Rooij, M. B., Gao, L., Tan, W. & Shen, L.https://doi.org/10.1016/j.porgcoat.2022.107060Local Shearing Force Measurement during Frictional Sliding Using Fluorogenic Mechanophores (2022)The journal of physical chemistry letters, 13(38), 8840-8844. Hsu, C. C., Hsia, F. C., Weber, B., de Rooij, M. B., Bonn, D. & Brouwer, A. M.https://doi.org/10.1021/acs.jpclett.2c02010Effect of sulfur on the hydrolytic stability and tribological properties of N-containing borate ester (2022)Wear, 504-505. Article 204433. Wu, Y., van der Heide, E. & He, Z.https://doi.org/10.1016/j.wear.2022.204433Experimental and numerical investigation of frictional behavior of carbon yarns for over-braiding conditions (2022)[Contribution to conference › Abstract] 14th International Conference on Textile Composites, TexComp 2022. Vu, A. N., Grouve, W. J. B., de Rooij, M. B. & Akkerman, R.Measuring Film Thickness in Starved Grease-Lubricated Ball Bearings: An Improved Electrical Capacitance Method (2022)Tribology transactions, 65(5), 869-879. Shetty, P., Meijer, R. J., Osara, J. A. & Lugt, P. M.https://doi.org/10.1080/10402004.2022.2091067Advancement of plasma electrolytic oxidation towards non-valve metals (2022)Surface and coatings technology, 442. Article 128403. Nie, X., Cai, R., Zhao, C., Sun, J., Zhang, J. & Matthews, D. T. A.https://doi.org/10.1016/j.surfcoat.2022.128403Deposition of titanium films on complex bowl-shaped workpieces using DCMS and HiPIMS (2022)Surface and coatings technology, 442. Article 128192. Xie, D., Wei, L. J., Liu, H. Y., Zhang, K., Leng, Y. X., Matthews, D. T. A., Ganesan, R. & Su, Y. Y.https://doi.org/10.1016/j.surfcoat.2022.128192HiPIMS obtained carbon nano-coatings on copper foil and their thermal conductivity (2022)Surface and coatings technology, 442. Article 128565. Hsieh, P.-Y., Chen, Y.-H., Matthews, D. T. A., He, J.-L. & Matthews, A.https://doi.org/10.1016/j.surfcoat.2022.128565Evaluating the oxidation properties of lubricants via non-isothermal thermogravimetric analysis: Estimating induction times and oxidation stability (2022)Tribology international, 171. Article 107569. Smook, L. A., Chatra K.R., S. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2022.107569Computational Contact Pressure Prediction of CoCrMo, SS 316L and Ti6Al4V Femoral Head against UHMWPE Acetabular Cup under Gait Cycle (2022)Journal of Functional Biomaterials, 13(2). Article 64. Jamari, J., Ammarullah, M. I., Santoso, G., Sugiharto, S., Supriyono, T., Prakoso, A. T., Basri, H. & van der Heide, E.https://doi.org/10.3390/jfb13020064Experimental Investigation of the Interlaminar Failure of Glass/Elium® Thermoplastic Composites Manufactured With Different Processing Temperatures (2022)Applied composite materials, 29(3), 1061-1082. Han, N., Yuksel, O., Zanjani, J. S. M., An, L. L., Akkerman, R. & Baran, I.https://doi.org/10.1007/s10443-021-10000-5Explore the Tribological Effects of Two N-Containing Functional Groups on O/W Emulsion (2022)Tribology letters, 70(2). Article 52. Wu, Y., van der Heide, E., He, Z. & de Vries, E.https://doi.org/10.1007/s11249-022-01594-3Modeling impact of grease mechanical ageing on bleed and permeability in rolling bearings (2022)Tribology international, 170. Article 107507. Akchurin, A., Ende, D. v. d. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2022.107507The role of process induced polymer morphology on the fracture toughness of titanium-PEKK interfaces (2022)Engineering fracture mechanics, 268. Article 108475. Marinosci, V. M., Helthuis, N. G. J., Chu, L., Grouve, W. J. B., Rooij, M. B. d., Wijskamp, S. & Akkerman, R.https://doi.org/10.1016/j.engfracmech.2022.108475Evaluation of the Crystal Structure and Mechanical Properties of Cu Doped TiN Films (2022)Coatings, 12(5). Article 652. Fan, Y., Xie, D., Ma, D., Jing, F., Matthews, D. T. A., Ganesan, R. & Leng, Y.https://doi.org/10.3390/coatings12050652Thermodynamic Characterization of Grease Oxidation-Thermal Stability via Pressure Differential Scanning Calorimetry (2022)Tribology transactions, 65(3), 542-554. Osara, J. A., Lugt, P. M., Bryant, M. D. & Khonsari, M. M.https://doi.org/10.1080/10402004.2022.2050452Design of bidirectional frictional behaviour for tactile contact using ellipsoidal asperity micro-textures (2022)Friction, 10(5), 762–771. Sergachev, D., Matthews, D. & Van Der Heide, E.https://doi.org/10.1007/s40544-021-0527-zTemperature and strain dependent fracture of AlSi coating in hot stamping of press hardening steel (2022)International journal of material forming, 15(3). Article 29. Venema, J., Hazrati, J., Zaman, S. B., Matthews, D. T. A. & Atzema, E.https://doi.org/10.1007/s12289-022-01685-5The Grease Life Factor concept for ball bearings (2022)Tribology international, 169. Article 107460. Lugt, P. M. & Berens, F.https://doi.org/10.1016/j.triboint.2022.107460Thermoset/Thermoplastic Interphases: The Role of Initiator Concentration in Polymer Interdiffusion (2022)Polymers, 14(7). Article 1493. Erartsin, O., Seyyed Monfared Zanjani, J. & Baran, I.https://doi.org/10.3390/polym14071493Grease Life Prognostics: Remaining Grease Life Estimation by Measuring Grease Properties and Using Predictive Models (2022)[Contribution to conference › Poster] M2i conference 2021. Hogenberk, F., Osara, J. A. & Lugt, P. M.Predicting friction at the bone–implant interface in cementless total knee arthroplasty (2022)Journal of the mechanical behavior of biomedical materials, 128. Article 105103. de Vries, E., Sánchez, E., Janssen, D., Matthews, D. & van der Heide, E.https://doi.org/10.1016/j.jmbbm.2022.105103Wavelength dependence of picosecond-pulsed laser ablation of hot-dip galvanized steel (2022)Applied physics A: Materials science and processing, 128. Article 296. Mustafa, H., Matthews, D. T. A. & Römer, G. R. B. E.https://doi.org/10.1007/s00339-022-05393-4Multiscale friction model for hot sheet metal forming (2022)Friction, 10, 316-334. Venema, J., Hazrati, J., Atzema, E., Matthews, D. & van den Boogaard, T.https://doi.org/10.1007/s40544-021-0504-6The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates (2022)Materials & Design, 214, 1-14. Article 110385. Ebrahimi, A., Sattari, M., Bremer, S. J. L., Luckabauer, M., Römer, G.-W. R. B. E., Richardson, I. M., Kleijn, C. R. & Hermans, M. J. M.https://doi.org/10.1016/j.matdes.2022.110385Grease Performance in Ball and Roller Bearings for All-Steel and Hybrid Bearings (2022)Tribology transactions, 65(1), 1-13. Lugt, P. M., van Zoelen, M. T., Vieillard, C., Berens, F., Gruell, R., Preisinger, G. & Meaney, P.https://doi.org/10.1080/10402004.2021.1889731The Grease Worker and its Applicability to Study Mechanical Aging of Lubricating Greases for Rolling Bearings (2022)Tribology transactions, 65(1), 32-45. Meijer, R. J. & Lugt, P. M.https://doi.org/10.1080/10402004.2021.1979151A numerical investigation of the sliding contact between a rigid spherical indenter and a rubber surface: The effect of sliding depth and surface roughness (2022)Jurnal Tribologi, 33, 20-30. Setiyana, B., Jamari, J., Ismail, R. & Schipper, D. J.Failure sequence determination in sandwich structures using concurrent acoustic emission monitoring and postmortem thermography (2022)Mechanics of materials, 164. Article 104113. Tabrizi, I. E., Oz, F. E., Zanjani, J. S. M., Mandal, S. K. & Yildiz, M.https://doi.org/10.1016/j.mechmat.2021.104113
2021
Evaluation of extreme hip joint movement after total hip arthroplasty: A retrospective study (2021)Open Access Macedonian Journal of Medical Sciences, 9, 1296-1300. Anwar, I. B., van der Heide, E., Jamari, J., Saputra, E., Santoso, A., Adriansyah, D. & Arimukti, Z.https://doi.org/10.3889/oamjms.2021.6528Noble gas control of diamond-like content and compressive stress in carbon films by arc-mixed mode high power impulse magnetron sputtering (2021)Surface and coatings technology, 427. Article 127785. Akhavan, B., Ganesan, R., Matthews, D. T. A., McKenzie, D. & Bilek, M. M. M.https://doi.org/10.1016/j.surfcoat.2021.127785Application of scaled boundary finite element method for vibration-based structural health monitoring of breathing cracks (2021)JVC/Journal of Vibration and Control, 27(23-24), 2870-2886. Sepehry, N., Ehsani, M., Zhu, W. & Bakhtiari-Nejad, F.https://doi.org/10.1177/1077546320968646The importance of the work of Duncan Dowson for modeling grease lubrication in rolling bearings (2021)Proceedings of the Institution of Mechanical Engineers. Part J: Journal of engineering tribology, 235(12), 2614-2615. Lugt, P. M.https://doi.org/10.1177/13506501211047736Tresca stress simulation of metal-on-metal total hip arthroplasty during normal walking activity (2021)Materials, 14(24). Article 7554. Ammarullah, M. I., Afif, I. Y., Maula, M. I., Winarni, T. I., Tauviqirrahman, M., Akbar, I., Basri, H., van der Heide, E. & Jamari, J.https://doi.org/10.3390/ma14247554Friction and wear pattern of silica-reinforced styrene-butadiene rubber (SBR) in sliding contact with a blade indenter (2021)Lubricants, 9(11). Article 110. Setiyana, B., Khafidh, M., Tauviqirrahman, M., Ismail, R., Jamari & Schipper, D. J.https://doi.org/10.3390/lubricants9110110A Model Configuration for Studying Stationary Grease Bleed in Rolling Bearings (2021)Tribology transactions, 64(6), 1127-1137. Zhang, Q., Mugele, F., Ende, D. v. d. & Lugt, P. M.https://doi.org/10.1080/10402004.2021.1904071Numerical and experimental studies of AlSi coating microstructure and its fracture at high temperatures (2021)Materials Science & Engineering A, 827. Article 142067. bin Zaman, S., Hazrati, J., de Rooij, M. & van den Boogaard, T.https://doi.org/10.1016/j.msea.2021.142067Investigating AlSi coating fracture at high temperatures using acoustic emission sensors (2021)Surface and coatings technology, 423. Article 127587. Zaman, S. b., Hazrati, J., Rooij, M. d., Matthews, D. & Boogaard, T. v. d.https://doi.org/10.1016/j.surfcoat.2021.127587Effect of grit-blasting on the fracture toughness of hybrid titanium-thermoplastic composite joints (2021)International journal of adhesion and adhesives, 109. Article 102893. Marinosci, V. M., Grouve, W. J. B., de Rooij, M. B., Wijskamp, S. & Akkerman, R.https://doi.org/10.1016/j.ijadhadh.2021.102893Normalising tactile friction (2021)Tribology international, 161. Article 107052. Sergachev, D. A., Matthews, D. T. A. & van der Heide, E.https://doi.org/10.1016/j.triboint.2021.107052Evolution of real area of contact due to combined normal load and sub-surface straining in sheet metal (2021)Friction, 9, 840-855. Shisode, M., Hazrati, J., Mishra, T., de Rooij, M. & van den Boogaard, T.https://doi.org/10.1007/s40544-020-0444-6Using digital image correlation for in situ strain and damage monitoring in hybrid fiber laminates under in‐plane shear loading (2021)Polymer composites, 42(8), 4029-4042. Tabrizi, I. E., Alkhateab, B., Zanjani, J. S. M. & Yildiz, M.https://doi.org/10.1002/pc.26114Surface carbon enrichment of stainless steel using nanosecond pulsed laser surface alloying of a graphite based coating (2021)[Contribution to conference › Paper] Lasers in Manufacturing 2021. Mustafa, H., Feinaeugle, M. & Römer, G. R. B. E.The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty (2021)Journal of Functional Biomaterials, 12(2), 1-14. Article 38. Jamari, J., Ammarullah, M. I., Saad, A. P. M., Syahrom, A., Uddin, M., van der Heide, E. & Basri, H.https://doi.org/10.3390/jfb12020038Effect of surface texturing on the performance of artificial hip joint for Muslim prayer (Salat) activity (2021)Biotribology, 26. Article 100177. Jamari, Tauviqirrahman, M., Husein, H. R. & Muchammadhttps://doi.org/10.1016/j.biotri.2021.100177Reducing Contact Stress of the Surface by Modifying Different Hardness of Femoral Head and Cup in Hip Prosthesis (2021)Frontiers in Mechanical Engineering, 7. Article 631940. Saputra, E., Budiwan Anwar, I., Jamari, J. & Heide, E. v. d.https://doi.org/10.3389/fmech.2021.631940Effect of start-stop motion on contact replenishment in a grease lubricated deep groove ball bearing (2021)Tribology international, 157. Article 106882. Cen, H. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2021.106882Mixed lubrication friction model including surface texture effects for sheet metal forming (2021)Journal of materials processing technology, 291. Article 117035. Shisode, M. P., Hazrati Marangalou, J., Mishra, T., de Rooij, M. & van den Boogaard, T.https://doi.org/10.1016/j.jmatprotec.2020.117035Study on the relationship between the tribological properties and oxidation degree of graphene derivatives in O/W emulsion (2021)Tribology international, 157. Article 106875. Wu, Y., Sun, T., He, Z., Zeng, X., Ren, T., de Vries, E. & van der Heide, E.https://doi.org/10.1016/j.triboint.2021.106875Photoswitching between Water-Tolerant Adhesion and Swift Release by Inverting Liquid Crystal Fingerprint Topography (2021)Advanced science, 8(8). Article 2004051. Feng, W., Chu, L., de Rooij, M. B., Liu, D. & Broer, D. J.https://doi.org/10.1002/advs.202004051Study of wear particles formation at single asperity contact: An experimental and numerical approach (2021)Wear, 470-471. Article 203644. Mekicha, M. A., Rooij, M. B. d., Mishra, T., Matthews, D. T. A., Jacobs, L. & Schipper, D. J.https://doi.org/10.1016/j.wear.2021.203644The effect of asperity geometry on the wear behaviour in sliding of an elliptical asperity (2021)Wear, 470-471. Article 203615. Mishra, T., de Rooij, M. & Schipper, D. J.https://doi.org/10.1016/j.wear.2021.203615Formation of Flat-on Lamellar Crystals in Absence of Nanoconfinement (2021)Advanced materials interfaces, 8(7). Article 2001894. Chu, L., Grouve, W. J. B., van Drongelen, M., de Vries, E. G., Akkerman, R. & de Rooij, M. B.https://doi.org/10.1002/admi.202001894Erratum: Consideration of culture is vital if we are to achieve the Sustainable Development Goals (One Earth (2021) 4(2) (307–319), (S2590332221000580), (10.1016/j.oneear.2021.01.012)) (2021)One earth, 4(3), 459. Zheng, X., Wang, R., Hoekstra, A. Y., Krol, M. S., Zhang, Y., Guo, K., Sanwal, M., Sun, Z., Zhu, J., Zhang, J., Lounsbury, A., Pan, X., Guan, D., Hertwich, E. G., Wang, C. & Wang, C.https://doi.org/10.1016/j.oneear.2021.02.007Evaluating Degradation Coefficients from Existing System Models (2021)Applied Mechanics, 2(1), 159-173. Osara, J. A. & Bryant, M. D.https://doi.org/10.3390/applmech2010010Thermo-responsive and shape-morphing CF/GF composite skin: Full-field experimental measurement, theoretical prediction, and finite element analysis (2021)Thin-Walled Structures, 160. Article 106874. Seyyed Monfared Zanjani, J., Yousefi Louyeh, P., Emami Tabrizi, I., Al-Nadhari, A. S. & Yildiz, M.https://doi.org/10.1016/j.tws.2020.106874Understanding the generation of wear particles in cold rolling processes (2021)Tribology international, 155. Article 106789. Mekicha, M. A., de Rooij, M. B., Jacobs, L., Matthews, D. T. A. & Schipper, D. J.https://doi.org/10.1016/j.triboint.2020.106789Picosecond pulsed underwater laser ablation of silicon and stainless steel: Comparing crater analysis methods and analysing dependence of crater characteristics on water layer thickness (2021)Applied surface science, 540. Article 148005. van der Linden, S., Hagmeijer, R. & Römer, G. R. B. E.https://doi.org/10.1016/j.apsusc.2020.148005Influence of the Polymer Interphase Structure on the Interaction between Metal and Semicrystalline Thermoplastics (2021)Advanced engineering materials, 23(2). Article 2000518. Chu, L., Grouve, W. J. B., van Drongelen, M., Guha, Y., de Vries, E. G., Akkerman, R. & de Rooij, M. B.https://doi.org/10.1002/adem.202000518Textured Polymer Surfaces Mimicking the Tactile Friction Between Wood and Skin (2021)JOM, 73(2), 515-523. Zhang, L., Rodríguez Urribarrí, A. C., Wang, H., Zhang, S., Zhang, Y., Zeng, X. & van der Heide, E.https://doi.org/10.1007/s11837-020-04513-wFatigue-based model for the droplet impingement erosion incubation period of metallic surfaces (2021)Fatigue & fracture of engineering materials & structures, 44(1), 199-211. Slot, H., Matthews, D., Schipper, D. & van der Heide, E.https://doi.org/10.1111/ffe.13352Co-Bonded Hybrid Thermoplastic-Thermoset Composite Interphase: Process-Microstructure-Property Correlation (2021)Materials, 14(2), 1-17. Article 291. Zanjani, J. S. M. & Baran, I.https://doi.org/10.3390/ma14020291An Evaporation Model for Base Oil from Grease-Lubricated Rolling Bearings including Breathing (2021)Tribology transactions, 64(5), 891-902. Shetty, P., Meijer, R. J. & Lugt, P. M.https://doi.org/10.1080/10402004.2021.1943088Analysis of the effect of the slip-pocket in single and double parallel bearing considering cavitation: A theoretical approach (2021)Lubricants, 9(1). Article 3. Muchammad, M., Tauviqirrahman, M., Jamari, J. & Schipper, D. J.https://doi.org/10.3390/lubricants9010003Effect of heating temperatures on AlSi coating microstructure and fracture during hot-tensile tests (2021)IOP Conference Series: Materials Science and Engineering, 1157. Article 012018. Zaman, S. B., Hazrati, J., de Rooij, M. B. & van den Boogaard, A. H.https://doi.org/10.1088/1757-899X/1157/1/012018External magnetic field guiding in HiPIMS to control sp3fraction of tetrahedral amorphous carbon films (2021)Journal of physics D: applied physics, 54(4). Article 045002. Akhavan, B., Ganesan, R., Bathgate, S., McCulloch, D. G., Partridge, J. G., Ionsecu, M., Matthews, D. T. A., Stueber, M., Ulrich, S., McKenzie, D. R. & Bilek, M. M. M.https://doi.org/10.1088/1361-6463/abb9d2Mechanical and thermal deformations effects on plain journal bearing with isoviscous boundary condition based on CFD and FSI methods (2021)Jurnal Tribologi, 28, 63-81. Muchammad, Tauviqirrahman, M., Soetopo, H. S. S. & JamariMicrostructuring glass surfaces using a combined masking and microslurry-jet machining process (2021)Precision engineering, 67, 172-177. Nakanishi, Y., Nakashima, Y. & van der Heide, E.https://doi.org/10.1016/j.precisioneng.2020.09.018Modeling boundary friction of coated sheets in sheet metal forming (2021)Tribology international, 153. Article 106554. Shisode, M., Hazrati, J., Mishra, T., de Rooij, M., ten Horn, C., van Beeck, J. & van den Boogaard, T.https://doi.org/10.1016/j.triboint.2020.106554Stern tube seals operation: A practical approach (2021)Advances in mechanical engineering, 13(2). Borras, F. X., van den Nieuwendijk, R., Ramesh, V., de Rooij, M. B. & Schipper, D. J.https://doi.org/10.1177/1687814021994404Stern tube seals under static condition: A multi-scale contact modeling approach (2021)Proceedings of the Institution of Mechanical Engineers. Part J: Journal of engineering tribology, 235(1), 181-195. Borras, F. X., Bazrafshan, M., De Rooij, M. B. & Schipper, D. J.https://doi.org/10.1177/1350650120925583The process of churning in a grease lubricated rolling bearing: Channeling and clearing (2021)Tribology international, 153. Article 106661. Chatra K.R., S. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2020.106661
2020
Layer-by-layer (LbL) assembly of polyelectrolytes at the surface of a fiberglass membrane used as a support of the polarized liquid–liquid interface (2020)Electrochimica acta, 363. Article 137215. Borgul, P., Rudnicki, K., Chu, L., Leniart, A., Skrzypek, S., Sudhölter, E. J. R. & Poltorak, L.https://doi.org/10.1016/j.electacta.2020.137215Experimental investigation of the jet-on-jet physical phenomenon in laser-induced forward transfer (LIFT) (2020)Optics express, 28(25), 37436-37449. Miksys, J., Arutinov, G., Feinaeugle, M. & Römer, G.-W.https://doi.org/10.1364/OE.401825Experimental and computational analysis of the polymerization overheating in thick glass/Elium® acrylic thermoplastic resin composites (2020)Composites. Part B : Engineering, 202. Article 108430. Han, N., Baran, I., Zanjani, J. S. M., Yuksel, O., An, L. L. & Akkerman, R.https://doi.org/10.1016/j.compositesb.2020.108430Deposition of Stellite 6 alloy on steel substrates using wire and arc additive manufacturing (2020)International journal of advanced manufacturing technology, 111(1-2), 411-426. Lin, Z., Ya, W., Subramanian, V. V., Goulas, C., di Castri, B., Hermans, M. J. M. & Pathiraj, B.https://doi.org/10.1007/s00170-020-06116-wMisalignment-induced macro-elastohydrodynamic lubrication in rotary lip seals (2020)Tribology international, 151. Article 106479. Borras, F. X., de Rooij, M. B. & Schipper, D. J.https://doi.org/10.1016/j.triboint.2020.106479The role of pulse repetition rate on picosecond pulsed laser processing of Zn and Zn-coated steel (2020)Optics & Laser Technology, 131. Article 106408. Mustafa, H., Matthews, D. T. A. & Römer, G. R. B. E.https://doi.org/10.1016/j.optlastec.2020.106408Combatting rain erosion of offshore wind turbine blades by co-bonded thermoplastic-thermoset hybrid composites (2020)IOP Conference Series: Materials Science and Engineering, 942(1). Article 012024. Seyyed Monfared Zanjani, J., Baran, I. & Akkerman, R.https://doi.org/10.1088/1757-899X/942/1/012024Fabrication of millimeter-long structures in sapphire using femtosecond infrared laser pulses and selective etching (2020)Optics and Lasers in Engineering, 133. Article 106114. Capuano, L., Tiggelaar, R. M., Berenschot, J. W., Gardeniers, J. G. E. & Römer, G. R. B. E.https://doi.org/10.1016/j.optlaseng.2020.106114Anodic plasma electrolytic deposition of composite coating on ferrous alloys with low thermal conductivity and high adhesion strength (2020)Surface and coatings technology, 398. Article 126081. Zhao, C., Sun, J., Nie, X., Tjong, J. & Matthews, D. T. A.https://doi.org/10.1016/j.surfcoat.2020.126081Wear mechanism evolution on brake discs for reduced wear and particulate emissions (2020)Wear, 452-453. Article 203283. Cai, R., Zhang, J., Nie, X., Tjong, J. & Matthews, D. T. A.https://doi.org/10.1016/j.wear.2020.203283A numerical-analytical approach to determining the real contact area of rough surface contact (2020)Tribology : materials, surfaces and interfaces, 14(3), 166-176. Wang, C. & Schipper, D. J.https://doi.org/10.1080/17515831.2020.1720382A CFD study on the significance of the cavitation modeling in textured bearing analysis (2020)Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71(2), 170-177. Susilowati, Muchammad, Tauviqirrahman, M. & Jamarihttps://doi.org/10.37934/arfmts.71.2.170177Numerical optimization of surface texture for hydrophobic textured slider bearing (2020)Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71(2), 160-169. Tauviqirrahman, M., Prahasto, T., Assaidiky, M. L. & Muchammadhttps://doi.org/10.37934/arfmts.71.2.160169Frictional characteristics of Fusion Deposition Modeling (FDM) manufactured surfaces (2020)Rapid prototyping journal, 26(6), 1095-1102. Sojoodi Farimani, F., de Rooij, M., Hekman, E. & Misra, S.https://doi.org/10.1108/RPJ-06-2019-0171Hierarchical Micro-/Nano-Structures on Polycarbonate via UV Pulsed Laser Processing (2020)Nanomaterials, 10(6), 1-19. Article 1184. Mezera, M., Alamri, S., Hendriks, W. A. P. M., Hertwig, A., Elert, A. M., Bonse, J., Kunze, T., Lasagni, A. F. & Römer, G.-W. R. B. E.https://doi.org/10.3390/nano10061184Risk of impingement on polyethylene liner of total hip arthroplasty prosthesis during muslim prayer (Salat) activity (2020)Open Access Macedonian Journal of Medical Sciences, 8(F), 65-69. Anwar, I. B., Saputra, E., Ismail, R., Jamari, J. & van der Heide, E.https://doi.org/10.3889/oamjms.2020.3991A multi-technique characterization of the tribofilm formed by a fully formulated CVT fluid (2020)Tribology international, 146. Article 106201. Wang, C., Gojzewski, H. & Schipper, D. J.https://doi.org/10.1016/j.triboint.2020.106201Effects of sebum properties on skin friction: Investigation using a bench test (2020)BioSurface and biotribology, 6(2), 43-47. Korbeld, K. T., Klaassen, M., Jobanputra, R. D., de Vries, E. G. & Masen, M. A.https://doi.org/10.1049/bsbt.2019.0015Porous materials additively manufactured at low energy: Single-layer manufacturing and characterization (2020)Materials & Design, 191. Article 108654. Jafari, D., van Alphen, K. J. H., Geurts, B. J., Wits, W. W., Cordova, L., Vaneker, T. H. J., Ur Rahman, N., Römer, G.-W. R. B. E. & Gibson, I.https://doi.org/10.1016/j.matdes.2020.108654Relative oxidation state of the target as guideline for depositing optical quality RF reactive magnetron sputtered Al2O3 layers (2020)Optical materials express, 10(6), 1451-1462. van Emmerik, C. I., Hendriks, W. A. P. M., Stok, M. L., de Goede, M., Chang, L., Dijkstra, M., Segerink, F., Post, D., Keim, E. G., Dikkers, M. J. & García-Blanco, S. M.https://doi.org/10.1364/ome.393058Replenishment of the EHL contacts in a grease lubricated ball bearing (2020)Tribology international, 146. Article 106064. Cen, H. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2019.106064Semi-analytical contact model to determine the flattening behavior of coated sheets under normal load (2020)Tribology international, 146. Article 106182. Shisode, M. P., Hazrati, J., Mishra, T., de Rooij, M. B. & van den Boogaard, A. H.https://doi.org/10.1016/j.triboint.2020.106182Interaction of inertia and cavitation in textured hydrodynamically lubricated bearing in very low sliding velocity considering slip (2020)Journal of physics: Conference series, 1517(1). Article 012005. Jamari, J., Hilmy, F., Muchammad, M. & Tauviqirrahman, M.https://doi.org/10.1088/1742-6596/1517/1/012005Numerical investigation of the hardness of tire rubber material by indentation method (2020)Journal of physics: Conference series, 1517(1). Article 012020. Setiyana, B., Prabowo, C., Jamari, J., Ismail, R., Sugiyanto, S. & Saputra, E.https://doi.org/10.1088/1742-6596/1517/1/012020Characterizing the fluid–matrix affinity in an organogel from the growth dynamics of oil stains on blotting paper (2020)Soft matter, 16(17), 4200-4209. Zhang, Q., Mugele, F., Lugt, P. M. & van den Ende, D.https://doi.org/10.1039/C9SM01965KInfluence of the pulse duration at near-infrared wavelengths on the laser-induced material removal of hot-dipped galvanized steel (2020)Journal of laser applications, 32(2). Article 022015. Mustafa, H., Matthews, D. T. A. & Römer, G. R. B. E.https://doi.org/10.2351/1.5119995Interpersonal differences in the friction response of skin relate to FTIR measures for skin lipids and hydration (2020)Colloids and surfaces B: Biointerfaces, 189. Article 110883. Klaassen, M., De Vries, E. G. & Masen, M. A.https://doi.org/10.1016/j.colsurfb.2020.110883Cracking Behavior of Coating during Hot Tensile Tests of AlSi-Coated Press Hardening Steel (2020)Procedia manufacturing, 47, 602-607. Zaman, S. B., Hazrati Marangalou, J., de Rooij, M. B. & van den Boogaard, A. H.https://doi.org/10.1016/j.promfg.2020.04.185Modelling of Friction in Hot Stamping (2020)Procedia manufacturing, 47, 596 - 601. Venema, J., Atzema, E., Hazrati, J., Matthews, D. & Boogaard, T. v. d.https://doi.org/10.1016/j.promfg.2020.04.184Evaluation of pre-sliding behavior at a rough interface: Modeling and experiment (2020)Journal of applied mechanics, 87(4). Article 041006. Bazrafshan, M., de Rooij, M. B., de Vries, E. G. & Schipper, D. J.https://doi.org/10.1115/1.4045900Channeling behavior of lubricating greases in rolling bearings: Identification and characterization (2020)Tribology international, 143. Article 106061. Chatra K R, S. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2019.106061Dopamine hydrochloride and carboxymethyl chitosan coatings for multifilament surgical suture and their influence on friction during sliding contact with skin substitute (2020)Friction, 8(1), 58-69. Zhang, G., Zheng, G., Ren, T., Zeng, X. & van der Heide, E.https://doi.org/10.1007/s40544-018-0242-6Misalignment-induced micro-elastohydrodynamic lubrication in rotary lip seals (2020)Lubricants, 8(2). Article 19. Borras, F. X., de Rooij, M. B. & Schipper, D. J.https://doi.org/10.3390/lubricants8020019The 25th International Federation for Heat Treatment and Surface Engineering Congress (IFHTSE '18) (2020)Surface and coatings technology, 382. Article 125165. Ouyang, J., Wang, Y., Pei, Y., Dong, H. & Matthews, D.https://doi.org/10.1016/j.surfcoat.2019.125165Modeling mixed lubrication friction for sheet metal forming applications (2020)Procedia manufacturing, 47, 586-590. Shisode, M. P., Hazrati, J., Mishra, T., de Rooij, M. & van den Boogaard, T.https://doi.org/10.1016/j.promfg.2020.04.180On the application of the mechanical aging Master Curve for lubricating greases to rolling bearings (2020)Tribology international, 141. Article 105918. Zhou, Y. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2019.105918Silent and safe roadtraffic-project: An optimization of the tyre-road interaction on noise and wet grip (2020)[Contribution to conference › Paper] 10th European Congress and Exposition on Noise Control Engineering, EuroNoise 2015. Bekke, D., Wijnant, Y., Schipper, D., Bobbink, B., Lansink, G. O. & Stevens, R.
2019
Characterizing the fluid-matrix affinity in an organogel from the growth dynamics of oil stains on blotting paper (2019)[Contribution to conference › Poster] 22nd M2I conference, Meeting Materials 2019. Zhang, Q.Influence of bulk temperature on laser-induced periodic surface structures on polycarbonate (2019)Polymers, 11(12). Article 1947. Mezera, M., Bonse, J. & Römer, G.-w. R. B. E.https://doi.org/10.3390/polym11121947On the sealability of metal-to-metal seals with application to premium casing and tubing connections (2019)SPE Drilling and Completion, 34(4), 382-396. Ernens, D., Pérez-Ràfols, F., van Hoecke, D., Roijmans, R. F. H., van Riet, E. J., Vande Voorde, J. B. E., Almqvist, A., de Rooij, M. B., Roggeband, S. M., van Haaften, W. M., Vanderschueren, M., Thibaux, P. & Pasaribu, H. R.https://doi.org/10.2118/194146-PAPico- to nanosecond pulsed laser-induced forward transfer (LIFT) of silver nanoparticle inks: A comparative study (2019)Applied physics A: Materials science and processing, 125(12). Article 814. Mikšys, J., Arutinov, G. & Römer, G. R. B. E.https://doi.org/10.1007/s00339-019-3085-8Calibrating lateral displacement sensitivity of AFM by stick-slip on stiff, amorphous surfaces (2019)Ultramicroscopy, 205, 1-4. Chu, L., Bus, M., Korobko, A. V. & Besseling, N. A. M.https://doi.org/10.1016/j.ultramic.2019.05.012Influence of roughness on the behavior of three-dimensional journal bearing based on fluid-structure interaction approach (2019)Journal of Mechanical Science and Technology, 33(10), 4783-4790. Tauviqirrahman, M., Ichsan, B. C., Jamari & Muchammadhttps://doi.org/10.1007/s12206-019-0919-4Multiphase computational fluid dynamics analysis of hydrodynamic journal bearing under the combined influence of texture and slip (2019)Lubricants, 7(11). Article 97. Tauviqirrahman, M., Jamari, J., Wibowo, B. S., Fauzan, H. M. & Muchammad, M.https://doi.org/10.3390/lubricants7110097A capillary-based model system for hydrodynamic spreading in porous media (2019)[Contribution to conference › Poster] Droplets 2019. Zhang, Q.Effect of inertia on the cavitation phenomena of hydrodynamic textured bearings considering slip (2019)Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(9). Article 387. Jamari, J., Muchammad, M., Hilmy, F. & Tauviqirrahman, M.https://doi.org/10.1007/s40430-019-1890-9Analysis of non-newtonian lubricated textured contact for mixed slip/no-slip configuration considering cavitation (2019)Journal of physics: Conference series, 1217(1). Article 12014. Pratomo, A. W., Muhammad, Tauviqirrahman, M., Jamari, J. & Bayuseno, A. P.https://doi.org/10.1088/1742-6596/1217/1/012014Film thickness in a grease lubricated ball bearing (2019)Tribology international, 134, 26-35. Cen, H. & Lugt, P. M.https://doi.org/10.1016/j.triboint.2019.01.032A capillary-based model system for hydrodynamic spreading in porous media (2019)[Contribution to conference › Poster] JMBC Burgers Symposium 2019. Zhang, Q., Mugele, F., van den Ende, D. & Lugt, P. M.An Overview: Laser-Based Additive Manufacturing for High Temperature Tribology (2019)Frontiers in Mechanical Engineering, 5. Article 16. Ur Rahman, N., Matthews, D. T. A., de Rooij, M., Khorasani, A. M., Gibson, I., Cordova, L. & Römer, G.-W.https://doi.org/10.3389/fmech.2019.00016A capillary-based model system for hydrodynamic spreading in porous media (2019)[Contribution to conference › Poster] Physics@Veldhoven 2019. Zhang, Q.Effect of spacing on flow field characteristic of tube artificial reefs with parallel formation by CFD (2019)Journal of Engineering and Applied Sciences, 14(3), 913-919. Tauviqirrahman, M., Sugiyanto, Yohana, E., Mulyadi, Jamari & Muchammadhttps://doi.org/10.3923/jeasci.2019.913.919Hydrodynamic lubrication of textured journal bearing considering slippage: Two-dimensional CFD analysis using multiphase cavitation model (2019)Tribology in Industry, 41(3), 401-415. Tauviqirrahman, M., Pratama, A., Jamari & Muchammadhttps://doi.org/10.24874/ti.2019.41.03.10Simulation load parameter on bipolar artificial hip joint using finite element method (FEM) (2019)Materials Today: Proceedings, 13(Part 1), 305-310. Nasa Al Hakim, R. A., Edwan, A., Jamari, J., Ismail, R., Bayuseno, A., Tauviqirrahman, M., Kurdi, O., Saputra, E., Anwar, I. B. & Dahlan, S.https://doi.org/10.1016/j.matpr.2019.03.232Stress analysis of the friction contact on filled styrene butadiene rubber by a blade indentation: A numerical investigation (2019)Materials Today: Proceedings, 13, 293-298. Setiyana, B., Jamari, J., Sugiyanto & Schipper, D. J.https://doi.org/10.1016/j.matpr.2019.03.230
2018
The Effect of Layer Variation between Liner and Cement Mantle on Reducing Cracks of PMMA Material Hip Joints (2018)E3S Web of Conferences, 73. Article 12013. Saputra, E., Jamari, J., Lie, H. A., Anwar, I. B., Ismail, R., Tauviqirrahman, M. & van der Heide, E.https://doi.org/10.1051/e3sconf/20187312013Rheological and wetting properties of Environmentally Acceptable Lubricants (EALs) for application in stern tube seals (2018)Lubricants, 6(4). Article 100. Borras Subirana, F.-X., de Rooij, M. B. & Schipper, D. J.https://doi.org/10.3390/lubricants6040100A Numerical Investigation of the Friction Contact of an Unfilled Styrene Butadiene Rubber by a Blade Sliding Indentation (2018)Journal of physics: Conference series, 1090(1). Article 012078. Setiyana, B., Khafidh, M., Ismail, R., Jamari, J. & Schipper, D. J.https://doi.org/10.1088/1742-6596/1090/1/012078Inertia effect of textured lubricated contact on the bearing performance using CFD approach (2018)Journal of physics: Conference series, 1090(1). Article 012041. Hilmy, F., Muchammad, M., Tauviqirrahman, M. & Jamari, J.https://doi.org/10.1088/1742-6596/1090/1/012041CFD analysis of partial slip effect on the performance of hydrodynamic lubricated journal bearings (2018)MATEC Web of Conferences, 204. Article 04014. Muchammad, Yunianto, B., Tauviqirrahman, M., Wicaksono, W. A. & Jamarihttps://doi.org/10.1051/matecconf/201820404014Influence of boundary slip layout on the hydrodynamic performance of partially textured journal bearing by CFD method (2018)MATEC Web of Conferences, 204. Article 04008. Tauviqirrahman, M., Muchammad, Akbar, R. A. & Jamarihttps://doi.org/10.1051/matecconf/201820404008The effect of textured surfaces on the hydrodynamic pressure generation in journal bearings (2018)MATEC Web of Conferences, 204. Article 04006. Muchammad, Tauviqirrahman, M., Akbar, R. A., Hilmy, F. & Jamarihttps://doi.org/10.1051/matecconf/201820404006
2015
Leading edge erosion of coated wind turbine blades: Review of coating life models (2015)Renewable energy, 80, 837-848. Slot, H. M., Gelinck, E. R. M., Rentrop, C. & van der Heide, E.https://doi.org/10.1016/j.renene.2015.02.036
2012
Surface Quality Prediction in Aluminum Extrusion (2012)Key engineering materials, 491, 27-34. de Rooij, M., Ma, X., den Bakker, A. J. & Werkhoven, R. J.https://doi.org/10.4028/www.scientific.net/KEM.491.27
2001
Feasibility study of Warm Drawing of Aluminium Products (2001)Journal of materials processing technology, 115(1), 118-121. Bolt, P. J., Lamboo, N. A. P. M. & Rozier, P. J. C. M.https://doi.org/10.1016/S0924-0136(01)00743-9