Below is the publication list of Dynamics Based Maintenance. The publications of individual group members can be found on their personal webpages in the staff section.
Jump to: 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001
2024
NLN-EMP - Motor Current and Vibration Monitoring Dataset for various Faults in an E-motor-driven Centrifugal Pump (2024)[Dataset Types › Dataset]. 4TU.Centre for Research Data. Bruinsma, S., Geertsma, R., Loendersloot, R. & Tinga, T.https://doi.org/10.4121/2b61183e-c14f-4131-829b-cc4822c369d0.v4Quantifying the suitability and feasibility of predictive maintenance approaches (2024)Computers & industrial engineering, 194. Article 110342. Alves da Silveira, N. N., Meghoe, A. A. & Tinga, T.https://doi.org/10.1016/j.cie.2024.110342Corrosion classification through deep learning of electrochemical noise time-frequency transient information (2024)Engineering applications of artificial intelligence, 133, 1-9. Article 108044. Homborg, A. M., Mol, J. M. C. & Tinga, T.https://doi.org/10.1016/j.engappai.2024.108044Impact Identification Method for Structural Health Monitoring of Stiffened Composite Panels using Passive Sensing Systems (2024)e-Journal of Nondestructive Testing. Marinho, N. R., Loendersloot, R., Grooteman, F., Wiegman, J. W. & Tinga, T.https://doi.org/10.58286/29655Validation of an Abaqus impact wave propagation model (2024)e-Journal of Nondestructive Testing. Bezes, P., Grooteman, F., Wiegman, J. W., Marinho, N. R. & Loendersloot, R.https://doi.org/10.58286/29690A maturity framework for data driven maintenance (2024)In PHM Society European Conference. Article 4039. PHM Society. Rijsdijk, C., van de Wijnckel, M. J. R. & Tinga, T.https://doi.org/10.36001/phme.2024.v8i1.4039Maintenance Strategies for Sewer Pipes with Multi-State Degradation and Deep Reinforcement Learning (2024)In Proceedings of the 8th European Conference of the PHM Society 2024 (pp. 629-642). Jimenez, L., Simão, T. D., Bukhsh, Z., Tinga, T., Molegraaf, H., Jansen, N. & Stoelinga, M. I. A.https://doi.org/10.36001/phme.2024.v8i1.4091Towards a Hybrid Framework For Prognostics With Limited Run-to-Failure Data (2024)In Proceedings of the 8th European Conference of the Prognostics and Health Management Society 2024 (pp. 844-855). PHM Society. Keizers, L. S., Loendersloot, R. & Tinga, T.https://doi.org/10.36001/phme.2024.v8i1.4017Comparing Homogeneous And Inhomogeneous Time Markov Chains For Modelling Degradation In Sewer Pipe Networks (2024)In European Safety and Reliability Conference (ESREL) (pp. 86-96). Article 9. Polish Safety and Reliability Association. Jimenez, L., Tinga, T., Heskes, T. & Stoelinga, M. I. A.In-situ mechanical and microstructural characterization of miniaturized Al-Mg-Sc-Zr and AlSi10Mg specimens processed by laser powder-bed fusion (PBF-LB) (2024)Journal of Materials Research and Technology, 30, 348-359. Cordova, L., Bor, T., Macía Rodríguez, E., Tinga, T. & Campos, M.https://doi.org/10.1016/j.jmrt.2024.03.084Utilizing the system instantaneous frequency for the structural health monitoring of bridges (2024)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Mostafa, N.https://doi.org/10.3990/1.9789036560382Motor Current and Vibration Monitoring Dataset for various Faults in an E-motor-driven Centrifugal Pump (2024)Data in brief, 52. Article 109987. Bruinsma, S., Geertsma, R., Loendersloot, R. & Tinga, T.https://doi.org/10.1016/j.dib.2023.109987Effect of eccentricity on sensing in spider web inspired cable nets (2024)Journal of physics: Conference series, 2647(19). Article 192012. Masmeijer, T. C. P., Méndez Echenagucia, T., Slavič, J., Loendersloot, R. & Habtour, E.https://doi.org/10.1088/1742-6596/2647/19/192012
2023
Demodulation-derived damage metrics for nonlinear wave modulation-based health monitoring of structures (2023)Mechanical systems and signal processing, 204. Article 110749. Ehsani, M., Sepehry, N., Shamshirsaz, M., Sadighi, M. & Loendersloot, R.https://doi.org/10.1016/j.ymssp.2023.110749Fault Bond Graphs for Correct Prognostics (2023)[Contribution to conference › Poster] 26th Engineering Mechanics Symposium 2023. Keizers, L. S., Loendersloot, R. & Tinga, T.Motor Current and Vibration Monitoring Dataset for various Faults in an E-motor-driven Centrifugal Pump (2023)[Dataset Types › Dataset]. 4TU.Centre for Research Data. Bruinsma, S., Geertsma, R., Loendersloot, R. & Tinga, T.https://doi.org/10.4121/2b61183e-c14f-4131-829b-cc4822c369d0.v1A Comparison of Optical Sensing Systems with Piezo-Electric Sensors for Impact Identification of Composite Plates (2023)In Proceedings of the 14th International Workshop on Structural Health Monitoring 2023: Designing SHM for Sustainability, Maintainability, and Reliability (pp. 1127-1133). DEStech Publications, Inc. Ribeiro Marinho, N., Loendersloot, R., Tinga, T., Grooteman, F. & Wiegman, J. W.Development of a Laboratory-Scale Test Methodology for Performance Evaluation of Lubricants for Hot Stamping of an Aluminium Alloy (2023)Lubricants, 11(9). Article 359. Rodriguez Leal, B., Decrozant-Triquenaux, J., Hardell, J. & Pelcastre, L.https://doi.org/10.3390/lubricants11090359Automatic inference of fault tree models via multi-objective evolutionary algorithms (2023)IEEE transactions on dependable and secure computing, 20(4), 3317-3327. Jimenez-Roa, L. A., Heskes, T., Tinga, T. & Stoelinga, M. I. A.https://doi.org/10.1109/TDSC.2022.3203805Integration of multiple failure mechanisms in a life assessment method for centrifugal pump impellers (2023)Advances in mechanical engineering, 15(6). Alves da Silveira, N. N., Meghoe, A. A. & Tinga, T.https://doi.org/10.1177/16878132231175755Selection of a suitable wear model for implementation in a generic rail damage function (2023)[Contribution to conference › Paper] Railway Engineering 2023. Meghoe, A. A., Loendersloot, R. & Tinga, T.Data-driven maintenance of military systems: Potential and challenges (2023)In Towards a data-driven military: A multidisciplinary perspective (pp. 73-96). Leiden University Press. Tinga, T., Homborg, A. M. & Rijsdijk, C.https://doi.org/10.24415/9789087284084Exploiting high frequency waves for SHM using 3D SLDV system: what can we learn more? (2023)In Measuring by Light 2023. Ribeiro Marinho, N., Di Maio, D., Loendersloot, R. & Tinga, T.Validation of a physics-based prognostic model with incomplete data: a rail wear case study (2023)International Journal of Prognostics and Health Management, 14(1), 1-16. Article 3283. Meghoe, A. A., Loendersloot, R. & Tinga, T.https://doi.org/10.36001/ijphm.2023.v14i1.3283Three-dimensional scaled boundary finite element method to simulate Lamb wave health monitoring of homogeneous structures: Experiment and modelling (2023)Ultrasonics, 129. Article 106892. Ehsani, M., Shamshirsaz, M., Sadighi, M., Sepehry, N. & Loendersloot, R.https://doi.org/10.1016/j.ultras.2022.106892Theoretical and experimental investigations on control parameters of piezo-based vibro-acoustic modulation health monitoring of contact acoustic nonlinearity in a sandwich beam (2023)Applied acoustics, 203. Article 109193. Ehsani, M., Shamshirsaz, M., Sadighi, M., Sepehry, N. & Loendersloot, R.https://doi.org/10.1016/j.apacoust.2022.109193Decision Framework for Predictive Maintenance Method Selection (2023)Applied Sciences, 13(3). Article 2021. Tiddens, W. W., Braaksma, J. & Tinga, T.https://doi.org/10.3390/app13032021An Investigation of Complex Mode Shapes (2023)In Nonlinear Structures and Systems, Volume 1: Proceedings of the 40th IMAC, A Conference and Exposition on Structural Dynamics, 2022 (pp. 5-17) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Verhoeven, C., Ewins, D. J., Ellenbroek, M. H. M., Yao, X. & Di Maio, D.https://doi.org/10.1007/978-3-031-04086-3_2Impact Damage Identification on Composite Structures (2023)In European Workshop on Structural Health Monitoring, EWSHM 2022 (pp. 586-594) (Lecture Notes in Civil Engineering; Vol. 253). Springer. Loendersloot, R., Marinho, N. R. & Grooteman, F.https://doi.org/10.1007/978-3-031-07254-3_59The influence of vehicle dynamics on the time-dependent resonances of a bridge (2023)Advances in Bridge Engineering, 4. Article 22. Mostafa, N., Di Maio, D., Loendersloot, R. & Tinga, T.https://doi.org/10.1186/s43251-023-00102-4
2022
Atmospheric corrosion prognostics: Predicting the Unpredictable? (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Keizers, L. S., Loendersloot, R. & Tinga, T.Dynamics-based impact identification method for composite structures (2022)In Twenty-fifth Engineering Mechanics Symposium, October 25-October 26, 2022. Hotel Papendal, Arnhem (pp. 51-51). Eindhoven University of Technology. Ribeiro Marinho, N., Loendersloot, R., Tinga, T. & Grooteman, F.Estimation of the shape and size of interaction volume for non-collinear wave mixing inspections in PVC (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Chidambaram, N., Loendersloot, R., Yntema, D. & Tinga, T.Feature Selection for Failure Recognition: Comparing Vibration Analysis and Motor Current Signature Analysis (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Bruinsma, S., Tinga, T., Geertsma, R. & Loendersloot, R.Impact identification method for composite structures: A structured approach for a full-scale aircraft component (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Ribeiro Marinho, N. R. M., Loendersloot, R., Tinga, T. & Grooteman, F.Predictive Maintenance Models for Military Aircraft Systems (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Heerink, N., Loendersloot, R. & Tinga, T.Railway bridge damage detection based on extraction of instantaneous frequency by Wavelet Synchrosqueezed Transform (2022)Advances in Bridge Engineering, 3. Article 12. Mostafa, N., Di Maio, D., Loendersloot, R. & Tinga, T.https://doi.org/10.1186/s43251-022-00063-0Trends and Challenges in "Material & Structural Health Monitoring" (Workshop 4) (2022)In Twenty-fifth Engineering Mechanics Symposium, October 25-October 26, 2022. Hotel Papendal, Arnhem (pp. 17-17). Eindhoven University of Technology. Loendersloot, R., Lourens, E.-M. & Hoefnagels, J.Framework for predictive maintenance method selection (2022)[Working paper › Working paper]. University of Twente. Tiddens, W. W., Braaksma, J. & Tinga, T.Deterioration modeling of sewer pipes via discrete-time Markov chains: A large-scale case study in the Netherlands (2022)In Proceedings of the 32nd European Safety and Reliability Conference (ESREL 2022) (pp. 1299-1306). Jimenez-Roa, L. A., Heskes, T., Tinga, T., Molegraaf, H. J. A. & Stoelinga, M. I. A.https://doi.org/10.3850/978-981-18-5183-4_R22-13-482-cdAtmospheric Corrosion Prognostics Using a Particle Filter (2022)In Proceedings of the 32nd European Safety and Reliability Conference (ESREL 2022) (pp. 1259-1266). Keizers, L. S., Loendersloot, R. & Tinga, T.https://rpsonline.com.sg/rps2prod/esrel22-epro/html/R22-08-170.xmlUncertainty propagation in rail wear prediction using an analytical method and field observations (2022)[Contribution to conference › Paper] Fifth international conference on railway technology. Meghoe, A. A., Loendersloot, R. & Tinga, T.Non-stationary Analysis of Vehicle-Bridge Interaction for Structural Health Monitoring of a Railway Bridge (2022)In Proceedings of the Fifth International Conference on Railway Technology: Research, Development and Maintenance (pp. 1-6). Mostafa, N., Di Maio, D. & Loendersloot, R.https://doi.org/10.4203/ccc.1.27.1The AmmoniaDrive research project (2022)SWZ|Maritime Newsletter, 2022, 24-28. Stichting Schip en Werf de Zee. de Vos, P., Somers, L. M. T., Tinga, T., Foekema, E. M., van der Zwaan, B. & Negenborn, R. R.https://swzmaritime.nl/news/2022/09/15/the-ammoniadrive-project-explained-ammonia-as-a-marine-fuel-done-right/Health monitoring for a helicopter Environmental Control System (2022)[Contribution to conference › Other] 1st International Conference for CBM in Aerospace. Vos, P., Tinga, T. & Hartvelt, F.Highly Sensitive Nonlinear Identification to Track Early Fatigue Signs in Flexible Structures (2022)Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(2). Article 021005. Habtour, E., Di Maio, D., Masmeijer, T., Gonzalez, L. C. & Tinga, T.https://doi.org/10.1115/1.4052420Development of Sensor Technology & Maintenance Concepts for Corrosion-Related Maintenance (2022)[Thesis › EngD Thesis]. University of Twente. Gergely, A.Exploring predictive maintenance applications in industry (2022)Journal of quality in maintenance engineering, 28(1), 68-85. Tiddens, W. W., Braaksma, J. & Tinga, T.https://doi.org/10.1108/JQME-05-2020-0029Investigation of fatigue damage growth and self-heating behaviour of cross-ply laminates using simulation-driven dynamic test (2022)International Journal of Fatigue, 155. Article 106617. Di Maio, D., Voudouris, G. & Sever, I. A.https://doi.org/10.1016/j.ijfatigue.2021.106617
2021
Extracting the time-dependent resonances of a vehicle–bridge interacting system by wavelet synchrosqueezed transform (2021)Structural control & health monitoring, 28(12), 1-24. Article e2833. Mostafa, N., Di Maio, D., Loendersloot, R. & Tinga, T.https://doi.org/10.1002/stc.2833Implementing Industry 4.0 in Steel Manufacturing’s Evolving IIoT Systems (2021)Iron and Steel Technology, 18(9), 154-162. Article PR-TN1221-1. Schwarz, M. M., Anbalagan, S. N., Jagers, S. & Loendersloot, R.https://doi.org/10.33313/TR/1221Predicting critical failures using physics of failures: opportunities and challenges (2021)In AVT-356 Research Symposium on Physics of Failure for Military Platform Critical Subsystems (pp. 1-13). Article 13. NATO Science & Technology Organization. Tinga, T.Unscented Kalman Filtering for Prognostics Under Varying Operational and Environmental Conditions (2021)International Journal of Prognostics and Health Management, 12(2), 1-20. Keizers, L. S., Loendersloot, R. & Tinga, T.https://doi.org/10.36001/ijphm.2021.v12i2.2943A hybrid predictive methodology for head checks in railway infrastructure (2021)Proceedings of the Institution of Mechanical Engineers. Part F: Journal of rail and rapid transit, 235(10), 1312-1322. Meghoe, A. A., Jamshidi, A., Loendersloot, R. & Tinga, T.https://doi.org/10.1177/0954409721993611High temperature tribological behaviour of PVD coated tool steel and aluminium under dry and lubricated conditions (2021)Friction. Decrozant-Triquenaux, J., Pelcastre, L., Courbon, C., Prakash, B. & Hardell, J.https://doi.org/10.1007/s40544-020-0435-7Effect of surface engineered tool steel and lubrication on aluminium transfer at high temperature (2021)Wear. Article 203879. Decrozant-Triquenaux, J., Pelcastre, L., Courbon, C., Prakash, B. & Hardell, J.https://doi.org/10.1016/j.wear.2021.203879High temperature tribological studies on hardfaced tool steels for press hardening of Al-Si coated boron steel (2021)Wear, 476. Article 203728. Pelcastre, L., Kurnia, E., Hardell, J., Decrozant-Triquenaux, J. & Prakash, B.https://doi.org/10.1016/j.wear.2021.203728Continuous Scanning Laser Vibrometry: A raison d’être and applications to vibration measurements (2021)Mechanical systems and signal processing, 156. Article 107573. Di Maio, D., Castellini, P., Martarelli, M., Rothberg, S., Allen, M. S., Zhu, W. D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2020.107573Data Selection Criteria for the Application of Predictive Maintenance to Centrifugal Pumps (2021)In Proceedings of the 6th European Conference of the Prognostics and Health Management Societ (pp. 372-380) (Archives of the PHM Society European Conference; Vol. 6). PHM Society. Silveira, N. N. A., Loendersloot, R., Meghoe, A. A. & Tinga, T.https://doi.org/10.36001/phme.2021.v6i1.2839Autonomous fault detection and diagnostics, an enabler to control risks of military operations (2021)In Proceedings of the 58th ESReDA Seminar: Using Knowledge to Manage Risks and Threats: Practices and Challenges. European Safety and Reliability Association. Rijsdijk, C., van der Sluis, W. & Tinga, T.Calculating loads and life-time reduction of wind turbine gearbox and generator bearings due to shaft misalignment (2021)Wind Engineering, 45(3), 547-568. Rommel, D. P., Di Maio, D. & Tinga, T.https://doi.org/10.1177/0309524X20914022Diagnostics Based on Continuous Scanning LDV Measurements and RASTAR Analysis Method (2021)Experimental Techniques, 45(3), 411-428. Di Maio, D., Bruinsma, S. & Tinga, T.https://doi.org/10.1007/s40799-020-00406-4Special Issue on Computer Vision and Scanning Laser Vibrometry Methods (2021)Experimental Techniques, 45(3), 237-239. Di Maio, D. & Harvey, P. S.https://doi.org/10.1007/s40799-021-00480-2Viability of Image Compression in Vibrothermography (2021)Experimental Techniques, 45(3), 345-362. Chi, X., Zhang, Y., Di Maio, D. & Lieven, N. A. J.https://doi.org/10.1007/s40799-020-00395-4Maak niet alles voorspelbaar (2021)Europoort Kringen, 2021, 22-27. Waterfront Media Concepten B.V.. Hertog, J. & Tinga, T.Dynamic Maintenance based on Functional Usage Profiles (2021)Journal of quality in maintenance engineering, 27(1), 21-42. Tinga, T., Wubben, F., Tiddens, W., Wortmann, H. & Gaalman, G.https://doi.org/10.1108/JQME-01-2019-0002Influence of lubrication, tool steel composition, and topography on the high temperature tribological behaviour of aluminium (2021)Friction. Decrozant-Triquenaux, J., Pelcastre, L., Prakash, B. & Hardell, J.https://doi.org/10.1007/s40544-020-0371-6Numerical Modelling of Stochastic Fatigue Damage Accumulation in Thick Composites (2021)In European Workshop on Structural Health Monitoring: Special Collection of 2020 papers (pp. 776-787) (Lecture Notes in Civil Engineering; Vol. 128). Springer. Loendersloot, R., Ehsani, M., Sepehry, N. & Shamshirsaz, M.https://doi.org/10.1007/978-3-030-64908-1_72Transformer hot spot temperature prediction based on basic operator information (2021)International Journal of Electrical Power and Energy Systems, 124, 1-15. Article 106340. Rommel, D. P., Di Maio, D. & Tinga, T.https://doi.org/10.1016/j.ijepes.2020.106340
2020
Comparison of sensing electrodes for coating assessment (2020)[Other contribution › Other contribution]. University of Twente. Gergely, A. & Tinga, T.Design and development of a scenario analysis tool for a bridge using a physics-based digital twin (2020)[Thesis › EngD Thesis]. University of Twente. Kalyanasundaram, H.Effects of powder reuse on the microstructure and mechanical behaviour of Al-Mg-Sc-Zr alloy processed by laser powder bed fusion (LPBF) (2020)Additive manufacturing, 36. Article 101625. Cordova, L., Bor, T., de Smit, M., Carmignato, S., Campos, M. & Tinga, T.https://doi.org/10.1016/j.addma.2020.101625PrimaVera: Synergising Predictive Maintenance (2020)Applied Sciences, 10(23), 1-19. Article 8348. Ton, B., Basten, R., Bolte, J., Braaksma, J., Bucchianico, A. D., Calseyde, P. v. d., Grooteman, F., Heskes, T., Jansen, N., Teeuw, W., Tinga, T. & Stoelinga, M.https://doi.org/10.3390/app10238348Overview of potential methods for corrosion monitoring (2020)[Other contribution › Other contribution]. University of Twente. Gergely, A. & Tinga, T.Experimental fatigue behaviour of CFRP composites under vibration and thermal loading (2020)International Journal of Fatigue, 140. Article 105791. Voudouris, G., Di Maio, D. & Sever, I. A.https://doi.org/10.1016/j.ijfatigue.2020.105791Using ship sensor data to achieve smart maintenance? (2020)In Proceedings of the International Naval Engineering Conference 2020 (pp. 1-10). Institute of Marine Engineering, Science and Technology. Rijsdijk, C., Alves da Silveira, N. N. & Tinga, T.https://doi.org/10.24868/issn.2515-818X.2020.047Polynomial nonlinear state space identification of an aero-engine structure (2020)Computers & Structures, 238. Article 106299. Cooper, S. B., Tiels, K., Titurus, B. & Di Maio, D.https://doi.org/10.1016/j.compstruc.2020.106299Vehicle Bridge Interaction – Extracting the dynamic characteristics of the non-stationary train passing phase (2020)In Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics (pp. 1511-1523). Katholieke Universiteit Leuven. Mostafa, N., Di Maio, D. & Loendersloot, R.Corrigendum to “Measurement of nonlinear vibration response in aerospace composite blades using pulsed airflow excitation” [Measurement 130 (2018) 422–434] (Measurement (2018) 130 (422–434), (S0263224118307784), (10.1016/j.measurement.2018.08.041)) (2020)Measurement, 160. Article 107879. Di Sante, R. & Di Maio, D.https://doi.org/10.1016/j.measurement.2020.107879Health monitoring of bolted joints using modal-based vibrothermography (2020)Discover Applied Sciences, 2(8). Article 1446. Chi, X., Di Maio, D. & Lieven, N. A. J.https://doi.org/10.1007/s42452-020-03251-7The influence of hygrothermal aging on the fatigue behavior and residual strength of post-buckled co-bonded stiffened panels subjected to compressive loading (2020)Composites. Part B : Engineering, 194. Article 108023. van den Akker, B. P. H., Donadon, M. V., Loendersloot, R., de Oliveira, L. A. & Arbelo, M. A.https://doi.org/10.1016/j.compositesb.2020.108023Load calculations in wind turbine power trains: design, maintenance & reliability (2020)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Rommel, D. P.https://doi.org/10.3990/1.9789036550086Modal-based vibrothermography using feature extraction with application to composite materials (2020)Structural health monitoring, 19(4), 967-986. Chi, X., Di Maio, D. & Lieven, N. A. J.https://doi.org/10.1177/1475921719872415On the complexity of failure: a functional approach to vibration analysis (2020)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Sanchez Ramirez, A.https://doi.org/10.3990/1.9789036550246Application of an Unvalidated Process Model to Define Operational Functional Failures (2020)In Proceedings of the 30th European Safety and Reliability Conference and the 15th Probabilistic Safety Assessment and Management Conference. Article 3554. Research Publishing. Schwarz, M., Schepers, P., van Boggelen, J., Loendersloot, R. & Tinga, T.https://www.rpsonline.com.sg/proceedings/esrel2020/html/3554.xmlMeasuring the spreadability of pre-treated and moisturized powders for laser powder bed fusion (2020)Additive manufacturing, 32. Article 101082. Cordova, L., Bor, T., de Smit, M., Campos, M. & Tinga, T.https://doi.org/10.1016/j.addma.2020.101082Ultrasonic inline inspection of a cement-based drinking water pipeline (2020)Engineering Structures, 210, 1-9. Article 110413. Hernandez Delgadillo, H., Geelen, C., Kakes, R., Loendersloot, R., Yntema, D., Tinga, T. & Akkerman, R.https://doi.org/10.1016/j.engstruct.2020.110413Calculating wind turbine component loads for improved life prediction (2020)Renewable energy, 146, 223-241. Rommel, D. P., Di Maio, D. & Tinga, T.https://doi.org/10.1016/j.renene.2019.06.131Exploring the influence of powder properties and handling on the selective laser melting process (2020)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Cordova Gonzalez, L.https://doi.org/10.3990/1.9789036549455Rail wear and remaining life prediction using meta-models (2020)International Journal of Rail Transportation, 8(1), 1-26. Meghoe, A., Loendersloot, R. & Tinga, T.https://doi.org/10.1080/23248378.2019.1621780Application of wavelet synchro-squeezed transform (WSST) method to railway bridge health monitoring (2020)In EURODYN 2020 - XI International Conference on Structural Dynamics: Proceedings (pp. 1388-1396) (Proceedings of the International Conference on Structural Dynamic , EURODYN; Vol. 2020). National Technical University of Athens. Mostafa, N., Loendersloot, R., Di Maio, D. & Tinga, T.Development of a finite element model-based scenario analysis tool to support maintenance decisions on a bridge - A case study (2020)In Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics (pp. 1561-1571). Katholieke Universiteit Leuven. Kalyanasundaram, H., Loendersloot, R. & Tinga, T.http://past.isma-isaac.be/isma2020/proceedings/program/Failure behaviour of composites under both vibration loading and environmental conditions (2020)In Model Validation and Uncertainty Quantification: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 (pp. 25-32) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Voudouris, G., Di Maio, D. & Sever, I.https://doi.org/10.1007/978-3-030-12075-7_3High Temperature Tribology of Aluminium: Effect of Lubrication and Surface Engineering on Friction and Material Transfer (2020)[Other contribution › Other contribution]. Lulea University of Technology. Decrozant-Triquenaux, J.https://urn.kb.se/resolve?urn=urn%3Anbn%3Ase%3Altu%3Adiva-77673Measurement and analysis of the nonlinear stiffness of cfrp components during vibration fatigue testing (2020)In Rotating Machinery, Optical Methods and Scanning LDV Methods, Volume 6 - Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020 (pp. 61-71) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Peluzzo, M., Di Maio, D., Cammarano, A. & Castellini, P.https://doi.org/10.1007/978-3-030-47721-9_7Preface: Rotating Machinery, Optical Methods & Scanning LDV Methods, Volume 6 (2020)In Rotating Machinery, Optical Methods & Scanning LDV Methods, Volume 6: Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020 (pp. v) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D. & Baqersad, J.
2019
Physical Model-Based Predictive Maintenance for Rail Infrastructure (2019)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Meghoe, A. A.https://doi.org/10.3990/1.9789036548786Ultrasonic inspection of drinking water mains (2019)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Hernandez Delgadillo, H.https://doi.org/10.3990/1.9789036548533Artificial intelligence based condition monitoring of rail infrastructure (2019)[Thesis › EngD Thesis]. University of Twente. Ahmad, W.Detection of Precursors to Damage in Aerostructures (2019)[Contribution to conference › Paper] ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2019. Habtour, E. M., Tinga, T. & Dragman, T.Structural Dynamic Performance of Additive and Conventional Manufactured Aerospace Metallic Alloys (2019)In ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (pp. 1-6). Article 5763. American Society of Mechanical Engineers. Habtour, E. M., Cordova, L., Di Maio, D., Cole, D. P. & Tinga, T.Fatigue Damage Identification and Remaining Useful Life Estimation of Composite Structures using Piezo Wafer Active Transducers (2019)In Advances in Asset Management and Condition Monitoring: COMADEM 2019 (pp. 485-497) ( Smart Innovation, Systems and Technologies; Vol. 166). Springer. Loendersloot, R., Ehsani Amoli, M. & Shamshirsaz, M.https://doi.org/10.1007/978-3-030-57745-2Steering the propagation direction of a non-linear acoustic wave in a solid material (2019)Ultrasonics, 98, 28-34. Hernandez Delgadillo, H., Loendersloot, R., Yntema, D., Tinga, T. & Akkerman, R.https://doi.org/10.1016/j.ultras.2019.05.011Towards the development of a hybrid methodology of head checks in railway infrastructure (2019)In Railway Engineering 2019: 15th International Conference & Exhibition (pp. 1-12). UKRRIN. Meghoe, A., Jamshidi, A., Loendersloot, R. & Tinga, T.A New Adaptive E-Learning Concept for Multidisciplinary Learning Environments (2019)In Proceedings of the 15th International CDIO conference. University of Aarhus. Loendersloot, R. & Martinetti, A.https://doi.org/10.7146/aul.347The potential of additive manufacturing for service logistics (2019)[Book/Report › Report]. TKI Dinalog. de Boer, Y., van der Heijden, M., Basten, R. & Tinga, T.Structural state awareness through integration of global dynamic and local material behavior (2019)Journal of intelligent material systems and structures, 30(9), 1355-1365. Habtour, E. M., Cole, D. P., Kube, C. M., Henry, T. C., Haynes, R. A., Gardea, F., Sano, T. & Tinga, T.https://doi.org/10.1177%2F1045389X19828489Tribological Behaviour of PVD Coated Tool Steels in Hot Forming of Aluminium Alloys (2019)In Hot sheet metal forming of high-performance steel: Proceedings (pp. 365-372). Verlag Wissenschaftliche Scripten. Decrozant-Triquenaux, J., Pelcastre, L., Courbon, C. & Prakash, B.https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1308152&dswid=-9345Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization (2019)JOM, 71(3), 1062-1072. Cordova, L., Campos, M. & Tinga, T.https://doi.org/10.1007/s11837-018-3305-2Advanced Predictive Maintenance of Military System (2019)[Contribution to conference › Poster] 22nd Engineering Mechanics Symposium 2019. Silveira, N., Tinga, T. & Loendersloot, R.Detection of sources of nonlinearity in multiple bolted joints by use of laser vibrometer (2019)In Rotating Machinery, Optical Methods and Scanning LDV Methods: roceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 (pp. 1-13) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. delli Carri, A., Campanelli, S. & Di Maio, D.https://doi.org/10.1007/978-3-030-12935-4_1Drying strategies to reduce the formation of hydrogen porosity in Al alloys produced by Additive Manufacturing (2019)[Contribution to conference › Paper] VII Congreso Español de Pulvimetalurgia y II Congreso Iberoamericano de Pulvimetalurgia, CEIPM 2019. Cordova, L., Bor, T., Campos, M. & Tinga, T.https://easychair.org/publications/preprint/V1ldMelt Pool Monitoring for the Laser Powder Bed Fusion Process (2019)In Proceedings of the European PM2019 conference. Cordova, L., Khorasani, A. M., Bor, T. C., Gibson, I., Campos, M. & Tinga, T.https://www.epma.com/publications/euro-pm-proceedings/category/euro-pm2019Modal parameter identification from measurements of vehicle-bridge interaction (2019)In Dynamics of Civil Structures: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (pp. 247-249) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Liu, Y., MacDonald, J. & Di Maio, D.https://doi.org/10.1007/978-3-319-74421-6_33Modal testing of a composite bladed disc using travelling wave excitation method (2019)In Topics in Modal Analysis and Testing: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (pp. 25-41) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D., Vater, M., Seidel, R. & Foglia, S.https://doi.org/10.1007/978-3-319-74700-2_4Physical Model-Based Prognostics and Health Monitoring to Enable Predictive Maintenance (2019)In Predictive Maintenance in Dynamic Systems: Advanced Methods, Decision Support Tools and Real-World Applications (pp. 313-353). Springer. Tinga, T. & Loendersloot, R.https://doi.org/10.1007/978-3-030-05645-2_11Preface (2019)In Rotating Machinery, Optical Methods & Scanning LDV Methods: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 (pp. V-V) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Niezrecki, C., Di Maio, D. & Baqersad, J.https://link.springer.com/content/pdf/bfm:978-3-030-12935-4/1.pdfPreface (2019)In Rotating Machinery, Vibro-Acoustics & Laser Vibrometry: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (pp. V-V) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D.https://link.springer.com/content/pdf/bfm:978-3-319-74693-7/1.pdf
2018
Diagnostics Based on Continuous Scanning LDV Methods: Numerical Study (2018)Journal of physics: Conference series, 1149. Article 012012. Bruinsma, S., Di Maio, D. & Tinga, T.https://doi.org/10.1088/1742-6596/1149/1/012012Experimental Validation of Non-Collinear Wave Mixing Model in a PVC Specimen (2018)In 2018 IEEE International Ultrasonics Symposium (IUS). IEEE. Hernandez Delgadillo, H., Loendersloot, R., Tinga, T. & Akkerman, R.https://doi.org/10.1109/ULTSYM.2018.8579750A Methodology Based on Pulse-Velocity Measurements to Quantify the Chemical Degradation Levels in Thin Mortar Specimens (2018)Journal of Nondestructive Evaluation, 37(4). Article 79. Hernandez Delgadillo, H., Kern, B., Loendersloot, R., Yntema, D. & Akkerman, R.https://doi.org/10.1007/s10921-018-0534-9Onderhoud verbeteren (2018)Vakblad Asset Management, 2018, 6-7. Nederlandse Vereniging voor Doelmatig Onderhoud. Tinga, T.https://issuu.com/nvdo7/docs/vam_06_december_2018Utilizing Force-State Mapping for Detecting Fatigue Damage Precursors in Aerospace Applications (2018)[Contribution to conference › Paper] 9th European Workshop on Structural Health Monitoring, EWSHM 2018. Habtour, E., Homborg, A., Di Maio, D., Haynes, R. & Tinga, T.A Labview/Arduino Measurement System for Shape Memory Alloy Wires (2018)In 2018 13th IEEE International Conference on Industry Applications (INDUSCON) (pp. 1179-1186). IEEE. Driesen, J. B., Fischer, C., Caselato de Sousa, G. L., de Sousa Santos, O., Loendersloot, R., Rade, D. A., Martins, C. A. & Góes, L. C. S.https://doi.org/10.1109/INDUSCON.2018.8627164Reconstruction and Fundamental Explanation of the Whole Life Rail Model (2018)[Contribution to conference › Poster] 21st Engineering Mechanics Symposium, EM 2018. Meghoe, A. A., Loendersloot, R. & Tinga, T.Mechanical properties of aluminum alloys produced by Metal Additive Manufacturing (2018)In Proceedings of the European PM2018 conference. Cordova, L., Macia, E., Campos, M. & Tinga, T.https://www.epma.com/publications/euro-pm-proceedings/category/euro-pm2018Single and combined fault diagnosis of reciprocating compressor valves using a hybrid deep belief network (2018)Proceedings of the Institution of Mechanical Engineers. Part C: Journal of mechanical engineering science, 232(20), 3767-3780. Tran, V. T., Thobiani, F. A., Tinga, T., Ball, A. D. & Niu, G.https://doi.org/10.1177/0954406217740929Design of a life prediction tool for high-speed diesel engines (2018)[Thesis › EngD Thesis]. University of Twente. Duplex, P.https://doi.org/10.3990/1.9789036546218Relative frequency, a damage sensitive feature for railroad bridges (2018)[Contribution to conference › Paper] Fourth International Conference on Railway Technology 2018. Mostafa, N., Loendersloot, R., Di Maio, D. & Tinga, T.Setting sail towards predictive maintenance: developing tools to conquer difficulties in the implementation of maintenance analytics (2018)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Tiddens, W. W.https://doi.org/10.3990/1.9789036546034Acousto-Ultrasonic Damage Monitoring in a Thick Composite Beam for Wind Turbine Applications (2018)[Contribution to conference › Other] 9th European Workshop on Structural Health Monitoring, EWSHM 2018. Loendersloot, R., Venterink, M., Krause, A. & Lahuerta, F.https://www.ndt.net/article/ewshm2018/papers/0138-Loendersloot.pdfSmart Autonomous Sensor Network for Multilevel Damage Identification (2018)[Contribution to conference › Other] 9th European Workshop on Structural Health Monitoring, EWSHM 2018. Loendersloot, R.https://www.ndt.net/article/ewshm2018/papers/0291-Loendersloot.pdfRail Wear Estimation for Predictive Maintenance: a strategic approach (2018)In Proceedings of the European Conference of the PHM Society. Article 370. PHM Society. Meghoe, A. A., Loendersloot, R., Bosman, R. & Tinga, T.https://phmpapers.org/index.php/phme/article/view/370Automated Failure Diagnosis in Aviation Maintenance Using eXplainable Artificial Intelligence (XAI) (2018)In Proceedings of the European Conference of the PHM Society. Article 432. PHM Society. ten Zeldam, S., de Jong, A., Loendersloot, R. & Tinga, T.https://phmpapers.org/index.php/phme/article/view/432Enhanced Data Driven Decision Support (2018)In Proceedings of the European Conference of the PHM Society. Article 409. PHM Society. Rijsdijk, C. & Tinga, T.https://www.phmpapers.org/index.php/phme/article/view/409Selecting Suitable Candidates for Predictive Maintenance (2018)International Journal of Prognostics and Health Management, 9(1). Article 020. Tiddens, W. W., Braaksma, A. J. J. & Tinga, T.http://www.phmsociety.org/node/2521Improving failure analysis efficiency by combining FTA and FMEA in a recursive manner (2018)Reliability engineering & system safety, 172, 36-44. Peeters, J. F. W., Basten, R. J. I. & Tinga, T.https://doi.org/10.1016/j.ress.2017.11.024Decision Support System for Condition Monitoring Technologies (2018)[Thesis › EngD Thesis]. University of Twente. Mouatamir, A.https://doi.org/10.3990/1.9789036545198FAME-X: Failure Mechanism Identification Expert System (2018)[Thesis › EngD Thesis]. University of Twente. Karampelas, D.https://doi.org/10.3990/1.9789036545174Damage Monitoring of Composite Components under Vibration Fatigue using Scanning Laser Doppler Vibrometer (2018)Experimental mechanics, 58(3), 499-514. Di Maio, D., Magi, F. & Sever, I. A.https://doi.org/10.1007/s11340-017-0367-yThe Detection of Fatigue Damage Accumulation in a Thick Composite Beam Using Acousto Ultrasonics (2018)In 1st International Conference on Health Monitoring of Civil and Maritime Structures (pp. 51-60). ASRANet. Venterink, M., Loendersloot, R. & Tinga, T.Connecting nonlinearities: Damage precursors detection and control methodology (2018)In Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics (pp. 3723-3730). Katholieke Universiteit Leuven. Habtour, E., Dragman, T., Masmeije, T., Di Maio, D., Haynes, R., Homborg, A. & Tinga, T.http://past.isma-isaac.be/downloads/isma2018/proceedings/Contribution_447_proceeding_3.pdfConnecting nonlinearities: Damage precursors detection and control methodology (2018)In Proceedings of ISMA2018 and USD2018 (pp. 3597-3605). Katholieke Universiteit Leuven. Habtour, E., Dragman, T., Masmeijer, T., Di Maio, D., Haynes, R., Homborg, A. M. & Tinga, T.Dynamic response and energy loss in jointed structures using finite element methods: Application to an aero-engine casing assembly (2018)In Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics (pp. 1835-1849). Katholieke Universiteit Leuven. Chi, X., Di Maio, D. & Lieven, N. A. J.http://past.isma-isaac.be/downloads/isma2018/proceedings/Contribution_315_proceeding_3.pdfEffect of Surface Engineered Tool Steels on Frition and Wear During Sliding Against Aluminium at High Temperatures (2018)[Contribution to conference › Abstract] 18th Nordic Symposium on Tribology, NORDTRIB 2018. Decrozant-Triquenaux, J., Pelcastre, L., Prakash, B. & Hardell, J.https://www.diva-portal.org/smash/get/diva2:1308146/FULLTEXT01.pdfIntegration of system identification and finite element modelling of non-linear vibrating structures (2018)Mechanical systems and signal processing, 102, 401-430. Cooper, S. B., Di Maio, D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2017.09.031Listening to Corrosion (2018)In AVT-305 Research Specialists’ Meeting on Sensing Systems for Integrated Vehicle Health Management for Military Vehicles (pp. 1-14). Article 12. NATO Science & Technology Organization. Homborg, A. M., Tinga, T. & Mol, J. M. C.https://doi.org/10.14339/STO-MP-AVT-305-12-PDFModal analysis of an isolated nonlinear response mode using the Nyquist circle properties: Numerical case (2018)In Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics (pp. 2661-2672). Katholieke Universiteit Leuven. Di Maio, D.Static load estimation using artificial neural network: Application on a wing rib (2018)Advances in engineering software, 125, 113-125. Cooper, S. B. & Di Maio, D.https://doi.org/10.1016/j.advengsoft.2018.01.007Voorspellend onderhoud in de (staal)industrie (2018)Process control, 6-9. Tinga, T.Waarom en hoe gaan dingen stuk ? (2018)iMaintain, 2018, 10-13. Van der Linde, L. & Tinga, T.
2017
Van data naar de juiste onderhoudsstrategie (2017)Langs de IJssel, 2017, 4-5. Leijenaar, T. & Tinga, T.An international review of laser Doppler vibrometry: Making light work of vibration measurement (2017)Optics and Lasers in Engineering, 99, 11-22. Rothberg, S. J., Allen, M. S., Castellini, P., Di Maio, D., Dirckx, J. J. J., Ewins, D. J., Halkon, B. J., Muyshondt, P., Paone, N., Ryan, T., Steger, H., Tomasini, E. P., Vanlanduit, S. & Vignola, J. F.https://doi.org/10.1016/j.optlaseng.2016.10.023Validation of initial crack propagation under vibration fatigue by Finite Element analysis (2017)International Journal of Fatigue, 104, 183-194. Magi, F., Di Maio, D. & Sever, I.https://doi.org/10.1016/j.ijfatigue.2017.07.003Industrial-graded epoxy nanocomposites with mechanically dispersed multi-walled carbon nanotubes: Static and damping properties (2017)Materials, 10(10). Article 1222. Giovannelli, A., Di Maio, D. & Scarpa, F.https://doi.org/10.3390/ma10101222Influence of Wheelset Dynamic Behaviour on Rail Wear Prediction for Different Wheel-Rail Profile Combinations (2017)[Contribution to conference › Poster] 20th Engineering Mechanics Symposium, EM 2017. Meghoe, A. A., Loendersloot, R., Bosman, R. & Tinga, T.The influence of practical factors on the benefits of condition-based maintenance over time-based maintenance (2017)Reliability engineering & system safety, 158, 21-30. de Jonge, B., Teunter, R. & Tinga, T.https://doi.org/10.1016/j.ress.2016.10.002Assessment of Moisture Content and Its Influence on Laser Beam Melting Feedstock (2017)[Contribution to conference › Paper] Euro PM2017 Congress & Exhibition. Cordova, L., Campos, M. & Tinga, T.Rolling vibes: continuous transport infrastructure monitoring (2017)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Seraj, F.https://doi.org/10.3990/1.9789036543637Predictive maintenance of maritime systems: models and challenges (2017)In Safety & Reliability - Theory and Applications: Proceedings of the 27th European Safety and Reliability Conference (ESREL 2017) (pp. 421-429). Article 55. Taylor & Francis. Tinga, T., Tiddens, W. W., Amoiralis, F. & Politis, M.https://doi.org/10.1201/9781315210469-56Powder Characterization and Optimization for Additive Manufacturing (2017)[Contribution to conference › Paper] VI Congreso Nacional de Pulvimetalurgia i Congreso Iberoamericano de Pulvimetalurgia. Cordova, L., Campos, M. & Tinga, T.Modal strain energy-based structural health monitoring validation on rib stiffened composite panels (2017)Advanced composite materials, 26(Suppl. 1), 43-51. Hwang, J. S., Müller, J. M., Loendersloot, R. & Tinga, T.https://doi.org/10.1080/09243046.2017.1313576Onderhoud: van conservatief naar hightech (2017)Pomp NL, 2017(Maart), 6-7. Tinga, T.Extending modal testing technology for model validation of engineering structures with sparse nonlinearities: A first case study (2017)Mechanical systems and signal processing, 84(Part B), 97-115. delli Carri, A., Weekes, B., Di Maio, D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2016.04.012An Approach to Fault Diagnosis of Rotating Machinery Using the Second-Order Statistical Features of Thermal Images and Simplified Fuzzy ARTMAP (2017)Engineering, 9(6), 524-539. Article 77034. Thobiani, F. A., Tran, V. T. & Tinga, T.https://doi.org/10.4236/eng.2017.96033Corrosion monitoring: passive detection (2017)Marine Maintenance Technology International, 2017(2), 34-38. Homborg, A. M. & Tinga, T.http://viewer.zmags.com/publication/501863a6#/501863a6/36Experimental model validation of an aero-engine casing assembly (2017)In Model Validation and Uncertainty Quantification: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics 2017 (pp. 339-347) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D., Ramakrishnan, G. & Rajasagaran, Y.https://doi.org/10.1007/978-3-319-54858-6_34Identification of modal parameters based on moving load excitation (2017)Procedia engineering, 199, 960-965. Liu, Y., Macdonald, J. & Di Maio, D.https://doi.org/10.1016/j.proeng.2017.09.202Maintenance Optimization based on Mathematical Modeling (2017)[Thesis › PhD Thesis - Research external, graduation external]. de Jonge, B.http://hdl.handle.net/11370/13f3d6d8-519d-4dd7-a454-4c9e7e0d9c42Nonlinear vibration analysis of a complex aerospace structure (2017)In Nonlinear Dynamics: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics 2017 (pp. 55-68) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Cooper, S. B., Di Maio, D. & Ewins, D. J.https://doi.org/10.1007/978-3-319-54404-5_6Preface (2017)In Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics & Laser Vibrometry: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics 2017 (pp. V-V) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D. & Castellini, P.https://link.springer.com/book/10.1007/978-3-319-54648-3The business case for condition-based maintenance: a hybrid (non-) financial approach (2017)In Safety & Reliability - Theory and Applications: ESREL 2017 (pp. -). Taylor & Francis. Tiddens, W. W., Tinga, T., Braaksma, A. J. J. & Brouwer, O.https://doi.org/10.1201/9781315210469-107Towards Informed Maintenance Decision Making: Guiding the Application of Advanced Maintenance Analyses (2017)In Optimum Decision Making in Asset Management (pp. -). IGI Global. Tiddens, W. W., Braaksma, A. J. J. & Tinga, T.https://doi.org/10.4018/978-1-5225-0651-5.ch013Variability of dynamic response in jointed structures (2017)In Dynamics of Coupled Structures: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics 2017 (pp. 331-347) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D., Mitha, Z., Paul, J. V. & Chi, X.https://doi.org/10.1007/978-3-319-54930-9_29
2016
Maintenance is unjustifiable: an improved inference (2016)[Thesis › PhD Thesis - Research external, graduation UT]. University of Twente. Rijsdijk, C.https://doi.org/10.3990/1.9789036541909Accuracy and Multi Domain Piezoelectric Power Harvesting Model using VHDL-AMS and SPICE (2016)In Proceedings of IEEE Sensors 2016 (pp. 1-3). IEEE. Da Silva Souza, F., Oki, N., Filho, J. V., Loendersloot, R. & Berkhoff, A. P.https://doi.org/10.1109/ICSENS.2016.7808559Prediction and optimization of materials properties in Additive Manufacturing (2016)[Contribution to conference › Poster]. Cordova, L., Loendersloot, R. & Tinga, T.Physics based models for predictive maintenance of rail-infrastructure components (2016)[Contribution to conference › Poster] 19th Engineering Mechanics Symposium, EM 2016. Meghoe, A. A., Loendersloot, R. & Tinga, T.Monitoring dynamic stiffness that predicts concrete structure degradation (2016)In Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure. IALCCE. Mostafa, N., Loendersloot, R., Tinga, T., Reitsema, A. D. & Hordijk, D. A.Development of an inline water mains inspection technology: Detection of acidic deterioration in cement-based water pipes with ultrasonic pulse-echo technique (2016)In Proceedings of 2016 IEEE International Ultrasonics Symposium (IUS). IEEE. Hernandez Delgadillo, H., Loendersloot, R., Akkerman, R. & Yntema, D. R.https://doi.org/10.1109/ULTSYM.2016.7728471Damage initiation and structural degradation through resonance vibration: Application to composite laminates in fatigue (2016)Composites science and technology, 132, 47-56. Magi, F., Di Maio, D. & Sever, I.https://doi.org/10.1016/j.compscitech.2016.06.013Modal Strain Energy Based Structural Health Monitoring on Rib Stiffened Composite Panels (2016)[Contribution to conference › Paper] 3rd International Conference on Advances in Structural Health Management and Composite Structures. Hwang, J. S., Loendersloot, R. & Tinga, T.Dynamic behaviour of auxetic gradient composite hexagonal honeycombs (2016)Composite structures, 149, 114-124. Boldrin, L., Hummel, S., Scarpa, F., Di Maio, D., Lira, C., Ruzzene, M., Remillat, C. D. L., Lim, T. C., Rajasekaran, R. & Patsias, S.https://doi.org/10.1016/j.compstruct.2016.03.044A Finite Element Approach to Modeling Abrasive Wear Modes (2016)Tribology transactions, 60(4), 711-718. Woldman, M., van der Heide, E., Tinga, T. & Masen, M. A.https://doi.org/10.1080/10402004.2016.1206647Response phase mapping of nonlinear joint dynamics using continuous scanning LDV measurement method (2016)In Proceedings of the 12th International A.I.VE.LA. Conference on Vibration Measurements by Laser and Noncontact Techniques: Advances and Applications. Article 070003 (AIP Conference Proceedings; Vol. 1740). American Institute of Physics. Di Maio, D., Bozzo, A. & Peyret, N.https://doi.org/10.1063/1.4952680Best practices in maintenance performance measurement at the Netherlands armed forces (2016)In EuroMaintenance 2016 (pp. -). EFNMS. Andela, C., Rijsdijk, C. & Tinga, T.Vibro-acoustic modulation–based damage identification in a composite skin–stiffener structure (2016)Structural health monitoring, 15(4), 458-472. Ooijevaar, T. H., Rogge, M. D., Loendersloot, R., Warnet, L., Akkerman, R. & Tinga, T.https://doi.org/10.1177/1475921716645107Modelling failure behaviour: a case study (2016)[Contribution to conference › Paper] World Maintenance Conference. Rijsdijk, C., Werkman, S. J., Jansen, P. & Tinga, T.Towards Informed Maintenance Decision Making: Identifying and Mapping Successful Diagnostic and Prognostic Routes (2016)In 19th International Working Seminar on Production Economics (pp. 439-450). Tiddens, W. W., Braaksma, A. J. J. & Tinga, T.A study on detection of nonlinearity using an aero-engine casing assembly (2016)In Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering and USD2016 - International Conference on Uncertainty in Structural Dynamics (pp. 2625-2637). Katholieke Universiteit Leuven. Di Maio, D., Ramakrishnan, G., Pascalis, S., Rajasagaran, Y. & Ghambir, S.http://past.isma-isaac.be/downloads/isma2016/papers/isma2016_0157.pdfDamage identification using guided waves on a composite skin-stiffener structure (2016)In 8th European Workshop on Structural Health Monitoring (EWSHM 2016): Proceedings of a meeting held 5-8 July 2016, Bilbao, Spain (pp. 1269-1278). Curran Associates Inc.. Loendersloot, R., Battley, M. & Tinga, T.http://www.mendeley.com/research/damage-identification-using-guided-waves-composite-skinstiffener-structureDevelopment of a test planning methodology for performing experimental model validation of bolted flanges (2016)Nonlinear Dynamics, 83(1-2), 983-1002. Di Maio, D., Schwingshackl, C. & Sever, I. A.https://doi.org/10.1007/s11071-015-2382-9Experimental and numerical modelling of nonlinear complex assembled structures (2016)In Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering and USD2016 - International Conference on Uncertainty in Structural Dynamics (pp. 2597-2611). Katholieke Universiteit Leuven. Cooper, S. B. & Di Maio, D.http://past.isma-isaac.be/downloads/isma2016/papers/isma2016_0222.pdfIdentification of dynamic nonlinearities of bolted structures using strain analysis (2016)In Dynamic Behavior of Materials: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015 (pp. 387-413) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Di Maio, D.https://doi.org/10.1007/978-3-319-15221-9_35Impact Damage Identification in Composite Skin-Stiffener Structures Based on Modal Curvatures (2016)Structural control & health monitoring, 23(2), 198-217. Ooijevaar, T. H., Warnet, L., Loendersloot, R., Akkerman, R. & Tinga, T.https://doi.org/10.1002/stc.1754Model upgrading T0 augment linear model capabilities into nonlinear regions (2016)In Nonlinear Dynamics: Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016 (pp. 203-217) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Cooper, S. B., delli Carri, A. & Di Maio, D.https://doi.org/10.1007/978-3-319-29739-2_19Non linear finite element model validation of a lap-joint (2016)In Nonlinear Dynamics: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015 (pp. 279-291) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. delli Carri, A. & Di Maio, D.https://doi.org/10.1007/978-3-319-15221-9_25Nonlinear modal testing performed by pulsed-air jet excitation system (2016)In Nonlinear Dynamics: Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016 (pp. 155-170) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Piraccini, M., Di Maio, D. & Di Sante, R.https://doi.org/10.1007/978-3-319-29739-2_15Observing the effect of a policy: a maintenance case (2016)Journal of quality in maintenance engineering, 22(3), 277-301. Rijsdijk, C. & Tinga, T.https://doi.org/10.1108/JQME-10-2014-0055Preface (2016)[Contribution to conference › Paper] 34th Conference and Exposition on Structural Dynamics, IMAC 2016. Di Maio, D., Tarazaga, P. & Castellini, P.Scanning LDV measurement technology for vibration fatigue testing (2016)In Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics: Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016 (pp. 87-94) (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. Magi, F., Di Maio, D. & Sever, I.https://doi.org/10.1007/978-3-319-30084-9_8Use of continuous scanning LDV for diagnostics (2016)In Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics: Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016 (pp. 127-137) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 8). Springer. Di Maio, D.https://doi.org/10.1007/978-3-319-30084-9_11
2015
Physics based methodology for wind turbine failure detection, diagnostics & prognostics (2015)In EWEA 2015 (pp. 1-9). European Wind Energy Association. Breteler, D., Kaidis, C., Tinga, T. & Loendersloot, R.Development of testing methods for endurance trials of composites components (2015)Journal of composite materials, 49(24), 2977-2991. Di Maio, D. & Magi, F.https://doi.org/10.1177/0021998314558497Data driven decision support (2015)[Contribution to conference › Paper] Marine Maintenance World Expo 2015. Rijsdijk, C. & Tinga, T.Impact response characterization as basis for bearing diagnostics and prognostics (2015)In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 1-10) (Mechanisms and machine science; Vol. 21). Springer. Sanchez Ramirez, A., Loendersloot, R., Tinga, T. & D'Angelo, G.Abrasive wear based predictive maintenance for systems operating in sandy conditions (2015)Wear, 338-339, 316-324. Woldman, M., Tinga, T., van der Heide, E. & Masen, M. A.https://doi.org/10.1016/j.wear.2015.07.004Damage identification in composite panels using guided waves (2015)[Contribution to conference › Paper] 5th CEAS Air & Space Conference 2015. Loendersloot, R. & Moix-Bonet, M.Enabling maintenance performance prediction by improving performance indicators (2015)In Safety and Reliability of Complex Engineered Systems: ESREL 2015 (pp. 1001-1008). CRC Press (Taylor & Francis). Rijsdijk, C. & Tinga, T.Identification of barely visible impact damages on a stiffened composite panel with a probability-based approach (2015)In Structural Health Monitoring 2015: System Reliability for Verification and Implementation: Proceedings of the Tenth International Workshop on Structural Health Monitoring, September 1–3, 2015. DEStech Publications, Inc. Moix Bonet, M., Eckstein, B., Loendersloot, R. & Wierach, P.https://doi.org/10.12783/SHM2015/290A neural network approach to load identification on a wing rib (2015)In Proceedings of the Fourth International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering. Article 34 (Civil-Comp Proceedings; Vol. 109). Civil-Comp Press. Cooper, S. B. & Di Maio, D.https://doi.org/10.4203/ccp.109.34Damage Assessment in Composite Structures Based on Acousto-Ultrasonics: Evaluation of Performance (2015)In Smart Intelligent Aircraft Structures (SARISTU): Proceedings of the Final Project Conference (pp. 617-629). Springer. Moix Bonet, M., Wierach, P., Loendersloot, R. & Bach, M.https://doi.org/10.1007/978-3-319-22413-8_28Damage Identification in Composite Panels - Methodology and Visualisation (2015)In Smart Intelligent Aircraft Structures (SARISTU): Proceedings of the Final Project Conference (pp. 579-604). Springer. Loendersloot, R., Buethe, I., Michaelides, P., Moix Bonet, M. & Lampeas, G.https://doi.org/10.1007/978-3-319-22413-8Experimental evaluation of vibration-based damage identification methods on a composite aircraft structure with internallymounted piezo diaphragm sensors (2015)In Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring, IWSHM 2015 (pp. 1419-1426). DEStech Publications, Inc. Hwang, J., Loendersloot, R. & Tinga, T.https://doi.org/10.12783/SHM2015/177Implementation of a model for abrasive wear to develop a predictive maintenance concept for systems operating in sandy conditions (2015)In 20th International Conference on Wear of Materials (pp. -). Elsevier. Woldman, M., Tinga, T., van der Heide, E. & Masen, M. A.Nonlinear Dynamic Behavior of an Impact Damaged Composite Skin-Stiffener Structure (2015)Journal of sound and vibration, 353, 243-258. Ooijevaar, T. H., Rogge, M. D., Loendersloot, R., Warnet, L., Akkerman, R. & Tinga, T.https://doi.org/10.1016/j.jsv.2015.05.011Optimum maintenance strategy under uncertainty in the lifetime distribution (2015)Reliability engineering & system safety, 133, 59-67. de Jonge, B., Klingenberg, W., Teunter, R. & Tinga, T.https://doi.org/10.1016/j.ress.2014.09.013Reducing costs by clustering maintenance activities for multiple critical units (2015)Reliability engineering & system safety, 145, 93-103. de Jonge, B., Klingenberg, W., Teunter, R. & Tinga, T.https://doi.org/10.1016/j.ress.2015.09.003The adoption of prognostic technologies in maintenance decision making: a multiple case study (2015)Procedia CIRP, 38, 171-176. Tiddens, W. W., Braaksma, A. J. J. & Tinga, T.https://doi.org/10.1016/j.procir.2015.08.028
2014
Wind tunnel testing of a full scale helicopter blade section with an upstream active Gurney flap (2014)In Proceedings of the European Rotorcraft Forum (pp. 1-13). Royal Aeronautical Society. Loendersloot, R., Freire Gomez, J. & Booker, J. D.Aligning PHM, SHM and CBM by understanding the physical system failure behaviour (2014)In Proceedings of the European Conference of the Prognostics and Health Management Society (pp. 162-171). PHM Society. Tinga, T. & Loendersloot, R.https://www.phmsociety.org/node/1263Development of a piezoelectric based energy harvesting system for autonomous wireless sensor nodes (2014)In 7th European Workshop on Structural Health Monitoring (pp. 205-212). Gomez Casseres Espinosa, A. F., Sanchez Ramirez, A., Combita Alfonso, L. F., Loendersloot, R. & Berkhoff, A. P.http://www.ndt.net/article/ewshm2014/papers/0306.pdfVibration based blind identification of bearing failures for autonomous wireless sensor nodes (2014)In Proceedings of the European Conference of the Prognostics and Health Management Society (pp. 452-462). PHM Society. Sanchez Ramirez, A., Loendersloot, R. & Tinga, T.https://www.phmsociety.org/sites/phmsociety.org/files/phm_submission/2014/phmce_14_051.pdfVibro-Acoustic modulation based damage identification in a composite skin-stiffener structure (2014)In 7th European Workshop on Structural Health Monitoring (pp. 544-551). Ooijevaar, T. H., Loendersloot, R., Rogge, M. D., Akkerman, R. & Tinga, T.http://www.ndt.net/article/ewshm2014/papers/0180.pdfInnovative predictive maintenance concepts to improve life cycle management (2014)In International Naval Engineering Conference (pp. 1-8 (on CD ROM)). Institute of Marine Engineering, Science and Technology. Tinga, T.The effect of maintenance policy violations (2014)In EuroMaint 2014 (pp. 370-375). European Federation of National Maintenance Societies. Rijsdijk, C. & Tinga, T.An experimental and theoretical investigation into three-body abrasive wear (2014)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Woldman, M.https://doi.org/10.3990/1.9789036536219Vibration based structural health monitoring of composite skin-stiffener structures (2014)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Ooijevaar, T. H.https://doi.org/10.3990/1.9789036536240A Critical Appraisal of the Interpretation of Electrochemical Noise for Corrosion Studies (2014)Corrosion, 70(10), 971-987. Homborg, A. M., Tinga, T., Westing, E. P. M., Zhang, Z., Ferrari, G. M., de Wit, J. H. W. & Mol, J. M. C.https://doi.org/10.5006/1277Advanced predictive maintenance concepts based on the physics of failure (2014)In Optimal deployment of military systems. Technologies for military missions in the next decade (pp. 291-314). T.M.C. Asser Press. Tinga, T., Homborg, A. M., Woldman, M., Heerink, N. A. & Smeding, M.Detection of microbiologically influenced corrosion by electrochemical noise transients (2014)Electrochimica acta, 136, 223-232. Homborg, A. M., Morales, C. F. L., Tinga, T., de Wit, J. H. W. & Mol, J. M. C.https://doi.org/10.1016/j.electacta.2014.05.102Detection of nonlinear behaviour of composite components before and after endurance trials (2014)In Nonlinear Dynamics - Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, 2014 (pp. 83-95) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 2). Springer. Di Maio, D., delli Carri, A., Magi, F. & Sever, I. A.https://doi.org/10.1007/978-3-319-04522-1_8Een hele klus. Moderniseren onderhoudssector noodzakelijk (2014)Ingenieur, 2014(11), 50-51. Tinga, T. & van Dongen, L. A. M.Endurance tests performed using contact and contactless excitation methods: Application to composites components (2014)In Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics (pp. 753-766) (Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics). Katholieke Universiteit Leuven. Di Maio, D. & Magi, F.Experimental model validation of a non-linear structure with lap-joint using the physical space approach (2014)In Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics (pp. 1185-1198). Katholieke Universiteit Leuven. Delli Carri, A., Di Maio, D., Lucchetti, A. & Sever, I. A.Recovery of operational deflection shapes from noise-corrupted measurement data from CSLDV: Comparison between polynomial and mode filtering approaches (2014)In Residual Stress, Thermomechanics and Infrared Imaging, Hybrid Techniques and Inverse Problems, - Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics (pp. 83-91) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 8). Springer. Castellini, P., Chiariotti, P., Tomasini, E. P., Martarelli, M., Di Maio, D., Weekes, B. & Ewins, D. J.https://doi.org/10.1007/978-3-319-04774-4_8Study on correlation methods for damage detection: Simulation and experimental validation (2014)In 11th International Conference on Vibration Measurements by Laser and Noncontact Techniques, AIVELA 2014: Advances and Applications (pp. 50-64) (AIP Conference Proceedings; Vol. 1600). American Institute of Physics. Dall'Acqua, D. & Di Maio, D.https://doi.org/10.1063/1.4879568Wat zijn de onderhoudstrends van nu ? (2014)PT Industrieel management(9/10), 18-21. Tinga, T.
2013
Experimental validation of a newly designed 6 degrees of freedom scanning laser head: Application to three-dimensional beam structure (2013)Review of scientific instruments, 84(12). Article 121708. Di Maio, D. & Copertaro, E.https://doi.org/10.1063/1.4845535De dynamiek van onderhoud (2013)[Book/Report › Inaugural speech]. University of Twente. Tinga, T.Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements (2013)In 2012 IEEE international ultrasonics symposium (IUS) (pp. 1909-1912). IEEE. Demcenko, A., Ravanan, M., Visser, R., Loendersloot, R. & Akkerman, R.https://doi.org/10.1109/ULTSYM.2012.0479Application of SHM using an autonomous sensor network (2013)In Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM (pp. 854-861). DEStech Publications, Inc. Loendersloot, R., Schiphorst, F. B. A., Basten, T. G. H. & Tinga, T.Design Framework for Vibration Monitoring Systems for Helicopter Rotor Blade Monitoring Using Wireless Sensor Networks (2013)In Proceedings of the 9th International Workshop on Structural Health Monitoring (pp. 1023-1030). DEStech publishing. Sanchez Ramirez, A., Loendersloot, R., Jauregui Becker, J. M. & Tinga, T.A particle shape definition related to third-body abrasive wear (2013)In Proceedings of 5th World Tribology Conference (pp. -). Centro Congressi Internatzionale. Woldman, M., van der Heide, E., Tinga, T. & Masen, M. A.Impact damage detection in composite chiral sandwich panels using nonlinear vibro-acoustic modulations (2013)Smart Materials and Structures, 22(8). Article 084011. Klepka, A., Staszewski, W. J., Di Maio, D. & Scarpa, F.https://doi.org/10.1088/0964-1726/22/8/084011Six degrees of freedom measurement with continuous scanning laser doppler vibrometer (2013)Mechanical systems and signal processing, 38(2), 367-383. Giuliani, P., Di Maio, D., Schwingshackl, C. W., Martarelli, M. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2013.01.004The analysis of mechanical integrity in gas turbine engines subjected to combustion instabilities (2013)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Altunlu, A. C.https://doi.org/10.3990/1.9789036500555Wireless Sensor Network for Helicopter Rotor Blade Vibration Monitoring: Requirements Definition and Technological Aspects (2013)In Proceedings of the 10th International Conference on Damage Assessment on Structures, DAMAS 2013 (pp. 775- 782) (Key Engineering Materials; Vol. 569 - 570). Scientific.net. Sanchez Ramirez, A., Das, K., Loendersloot, R., Tinga, T. & Havinga, P. J. M.https://doi.org/10.4028/www.scientific.net/KEM.569-570.775Helicopter Rotor Blade Monitoring using Autonomous Wireless Sensor Network (2013)In Proceedings of The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies – CM/MFPT 2013 (pp. 775-782). The British Institute of Non-Destructive Testing. Sanchez Ramirez, A., Loendersloot, R. & Tinga, T.Engineers in a flap over rotor blades (2013)Flight International, 24-24. Paternoster, A., Loendersloot, R., Warnet, L., de Boer, A. & Akkerman, R.Actuator voor helikopterflaps (2013)Technisch weekblad, 2013, -. Paternoster, A., Loendersloot, R. & de Boer, A.Power harvesting using piezoelectric materials: applications in helicopter rotors (2013)[Thesis › PhD Thesis - Research UT, graduation UT]. de Jong, P. H.https://doi.org/10.3990/1.9789036535113Application of transient analysis using Hilbert spectra of electrochemical noise to the identification of corrosion inhibition (2013)Electrochimica acta, 116, 355-365. Homborg, A. M., Westing, E. P. M., Tinga, T., Ferrari, G. M., Zhang, X., de Wit, J. H. W. & Mol, J. M. C.https://doi.org/10.1016/j.electacta.2013.11.084Development of a Damage Quantification Model for Composite Skin-Stiffener Structures (2013)In New Trends in Smart Technologies (pp. 99-108). Fraunhofer Verlag. Loendersloot, R., Ooijevaar, T. H., de Boer, A. & Akkerman, R.Experimental non-linear modal testing of an aircraft engine casing assembly (2013)In Topics in Nonlinear Dynamics - Proceedings of the 31st IMAC, A Conference on Structural Dynamics, 2013 (pp. 15-36) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 1). Di Maio, D., Bennett, P., Schwingshackl, C. & Ewins, D. J.https://doi.org/10.1007/978-1-4614-6570-6_2Geometrical optimization of a hingeless deployment system for an active rotor blade (2013)Journal of intelligent material systems and structures, 24(7), 855-861. Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R.https://doi.org/10.1177/1045389X12461720Hoe betrouwbaar is een reliability waarde? (2013)[Contribution to conference › Paper] Maintenance Next, technologie- en onderhoudsexpo, Rotterdam, 2013. Tinga, T.Innovatieve onderhoudsconcepten bij Defensie (2013)[Contribution to conference › Paper] Maritiem Symposium, Rotterdam, 24 April 2013. Tinga, T.Modelling and validation of the nonlinear dynamic behaviour of bolted flange joints (2013)In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. Article GT2013-95029 (Proceedings of the ASME Turbo Expo; Vol. 7 A). Schwingshackl, C. W., Di Maio, D. & Green, J. S.https://doi.org/10.1115/GT2013-95029Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure (2013)In Proceedings of the 9th International Workshop on Structural Health Monitoring 2013 (pp. 445-453). DEStech Publications, Inc. Ooijevaar, T. H., Rogge, M. D., Loendersloot, R., Warnet, L., Akkerman, R. & de Boer, A.Novel time-frequency characterization of electrochemical noise data in corrosion studies using Hilbert spectra (2013)Corrosion science, 66, 97-110. Homborg, A. M., Westing, E. P. M., Tinga, T., Zhang, X., Oonincx, P. J., Ferrari, G. M., de Wit, J. H. W. & Mol, J. M. C.https://doi.org/10.1016/j.corsci.2012.09.007Physics of Failure and its Role in Maintenance (2013)Maintworld, 2013(1), 32-35. Tinga, T.Predictive maintenance of military systems based on physical failure models (2013)Chemical engineering transactions, 33, 295-300. Tinga, T.https://doi.org/10.3303/CET1333050Principles of loads and failure mechanisms. Applications in maintenance, reliability and design. (2013)[Book/Report › Book]. Springer. Tinga, T.https://doi.org/10.1007/978-1-4471-4917-0Simulation and measurement of in-plane vibrations of an ultra lightweight membrane using a newly designed 6DOF laser scanning head performing conical scan measurements (2013)In 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Article AIAA 2013-1460 (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference). Palmieri, M. & Di Maio, D.https://doi.org/10.2514/6.2013-1460Simulation based comparison of predictive maintenance policies (2013)In Safety, reliability and risk analysis : Beyond the horizon (pp. 1043-1049). Taylor & Francis. Tinga, T. & Janssen, R. H. P.https://doi.org/10.1201/b15938-154The influence of abrasive body dimensions on single asperity wear (2013)Wear, 301(1-2), 76-81. Woldman, M., van der Heide, E., Tinga, T. & Masen, M. A.https://doi.org/10.1016/j.wear.2012.12.009The interplay between deployment and optimal maintenance intervals for complex multi-component systems (2013)Proceedings of the Institution of Mechanical Engineers. Part O: Journal of risk and reliability, 227(3), 42-55. Tinga, T. & Janssen, R.https://doi.org/10.1177/1748006X13480743Transient analysis through Hilbert spectra of electrochemical noise signals for the identification of localized corrosion of stainless steel (2013)Electrochimica acta, 104, 84-93. Homborg, A. M., Tinga, T., Zhang, X., Westing, E. P. M., Oonincx, P. J., Ferrari, G. M., de Wit, J. H. W. & Mol, J. M. C.https://doi.org/10.1016/j.electacta.2013.04.085
2012
Power harvesting in a helicopter rotor using a piezo stack in the lag damper (2012)Journal of intelligent material systems and structures, 24(11), 1392-1404. de Jong, P., de Boer, A., Loendersloot, R. & van der Hoogt, P.https://doi.org/10.1177/1045389X12460336Measuring the performance of underplatform dampers for turbine blades by rotating laser Doppler vibrometer (2012)Mechanical systems and signal processing, 32, 269-281. Zucca, S., Di Maio, D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2012.05.011Lab-scale experimental validation of a piezoelectric energy harvesting lag damper (2012)In European Rotorcraft Forum 2012 (pp. 1-8). de Jong, P., Loendersloot, R., de Boer, A. & van der Hoogt, P.Simulation of Flexible Mechanisms in a Rotating Blade for Smart-Blade Applications (2012)In Proceeding of the European Rotorcraft Forum (pp. 1-8). ERF. Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R.Textile impregnation with thermoplastic resin - models and application (2012)In Flow Processes in Composite Materials, FPCM-11: Auckland, New Zealand, 9-12th July 2012 (pp. 344-351). University of Auckland. Loendersloot, R., Grouve, W. J. B., Lamers, E. A. D. & Wijskamp, S.Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors (2012)In Proceedings of the Sixth European Workshop on Structural Health Monitoring 2012 (pp. 232-239). DGZfP e.V.. Ooijevaar, T. H., Warnet, L., Loendersloot, R., Akkerman, R. & de Boer, A.http://www.ndt.net/article/ewshm2012/papers/tu3c3.pdfExperimental measurements of out-of-plane vibrations of a simple blisk design using Blade Tip Timing and Scanning LDV measurement methods (2012)Mechanical systems and signal processing, 28, 517-527. Di Maio, D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2011.09.018Continuous laser scanning of a lightweight membrane with monotone and multi-tone excitation techniques (2012)In 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Article AIAA 2012-1912 (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference). American Institute of Aeronautics and Astronautics. Tarazaga, P. A., Di Maio, D., Ameri, N. & Ewins, D. J.https://doi.org/10.2514/6.2012-1912Deployable auxetic shape memory alloy cellular antenna demonstrator: design, manufacturing and modal testing (2012)Smart Materials and Structures, 21(7). Article 075013. Jacobs, S., Coconnier, C., Di Maio, D., Scarpa, F., Toso, M. & Martinez, J.https://doi.org/10.1088/0964-1726/21/7/075013Design of high impedance test rig for composite structures vibration measurements (2012)In Topics in Modal Analysis II - Proceedings of the 30th IMAC, A Conference on Structural Dynamics, 2012 (pp. 453-463) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 6). Di Maio, D., Berardi, S., Vitale, N. & Ewins, D. J.https://doi.org/10.1007/978-1-4614-2419-2_46Experimental validation of a newly designed 6-DoF scanning laser head (2012)In 10th International Conference on Vibration Measurements by Laser and Noncontact Techniques, AIVELA 2012 (pp. 242-250) (AIP Conference Proceedings; Vol. 1457). Di Maio, D., Schwingshakl, C., Giuliani, P. & Ewins, D. J.https://doi.org/10.1063/1.4730563From discretization to continuous; advanced mechanical measurements using continuous scanning methods (2012)In Topics in Modal Analysis I - Proceedings of the 30th IMAC, A Conference on Structural Dynamics, 2012 (pp. 153-166) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 5). Di Maio, D.https://doi.org/10.1007/978-1-4614-2425-3_15Impact damage detection in composite chiral sandwich panels (2012)In Structural Health Monitoring II (pp. 160-167) (Key Engineering Materials; Vol. 518). Trans Tech Publications Ltd. Klepkal, A., Staszewski, W. J., Uhl, T., Di Maio, D., Scarpa, F. & Tee, K. F.https://doi.org/10.4028/www.scientific.net/KEM.518.160Investigating the influence of sand particle properties on abrasive wear behaviour (2012)Wear, 294-295, 419-426. Woldman, M., van der Heide, E., Schipper, D. J., Tinga, T. & Masen, M. A.https://doi.org/10.1016/j.wear.2012.07.017Mechanism based failure analysis (2012)[Book/Report › Book]. Netherlands Defence Academy. Tinga, T.Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC (2012)NDT & E international, 49, 34-39. Demcenko, A., Akkerman, R., Nagy, P. B. & Loendersloot, R.https://doi.org/10.1016/j.ndteint.2012.03.005Non-contact operational modal analysis of an optical membrane for space application (2012)In Topics in Modal Analysis I - Proceedings of the 30th IMAC, A Conference on Structural Dynamics, 2012 (pp. 265-275) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 5). Ameri, N., Tarazaga, P., Di Maio, D. & Ewins, D. J.https://doi.org/10.1007/978-1-4614-2425-3_24Smart actuation for helicopter rotorblades (2012)In Smart actuation and sensing systems - Recent advances and future challenges (pp. 657-678). IntechOpen. Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R.https://doi.org/10.5772/51438The interplay between deployment and optimal maintenance intervals for a navy frigate (2012)In European Safety and Reliability Congres (pp. 171-180). European Safety and Reliability Association. Tinga, T. & Janssen, R. H. P.Time-frequency methods for trend removal in electrochemical noise data (2012)Electrochimica acta, 70, 199-209. Homborg, A. M., Tinga, T., Zhang, X., Westing, E. P. M., Oonincx, P. J., de Wit, J. H. W. & Mol, J. M. C.https://doi.org/10.1016/j.electacta.2012.03.062
2011
Continuous Scan, a method for performing modal testing using meaningful measurement parameters; Part i (2011)Mechanical systems and signal processing, 25(8), 3027-3042. Di Maio, D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2011.05.018Sand particles and the abrasive wear they cause Friction (CD) (2011)In Wear and Wear Protection 2011. Deutsche Gesellschaft für Materialkunde e.V. Masen, M. A., Woldman, M., van der Heide, E., Schipper, D. J. & Tinga, T.The influence of sand particle properties on abrasive wear (2011)In Proceedings of the International Joint Tribology Conference 2011. Article Paper #61056. Woldman, M., van der Heide, E., Schipper, D. J., Masen, M. A. & Tinga, T.Geometric Optimisation of Hinge-less Deployment System for an Active Rotorblade (2011)In Proceedings of ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (CD Rom) (pp. 1-7). American Society of Mechanical Engineers. Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R.Geometric optimisation of a gurney flap hinge-less deployment system for a helicopter model blade (2011)In Proceeding of the European Rotorcraft Forum (pp. 1-6). ERF. Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R.Power harvesting in a helicopter lag damper (2011)In 37th European Rotorcraft Forum (pp. 1185-1192). de Jong, P., Loendersloot, R., de Boer, A. & van der Hoogt, P.Development of a Damage Quantification Model for Composite Skin-Stiffener Structures (2011)In 5th ECCOMAS Thematic Conference on Smart Structures and Materials SMART'11 (pp. 197-212). University of Saarland. Loendersloot, R., Ooijevaar, T. H., de Boer, A. & Akkerman, R.Power harvesting in a helicopter lag damper (2011)In 5th ECCOMAS Thematic Conference on Smart Structures and Materials SMART'11 (pp. 103-113). University of Saarland. de Jong, P., Loendersloot, R., de Boer, A. & van der Hoogt, P.Application of a multiscale constitutive framework to real gas turbine components (2011)Advanced materials research, 278, 253-258. Tinga, T., Brekelmans, W. A. M. & Geers, M. G. D.https://doi.org/10.4028/www.scientific.net/AMR.278.253A study of mechanical impedance in mechanical test rigs performing endurance testing using electromagnetic shakers (2011)In Modal Analysis Topics - Proceedings of the 29th IMAC, a Conference on Structural Dynamics, 2011 (pp. 503-512) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 3). Springer. Di Maio, D. & Ewins, D.https://doi.org/10.1007/978-1-4419-9299-4_42Advanced modal testing using continous scanning LDV methods (2011)In Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 (pp. 3529-3536). University of Southampton. Di Maio, D. & Ewins, D. J.Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratings (2011)In 5th International Conference on Composites Testing and Model Simulation (pp. 155-156). Ecole Polytechnique Fédérale de Lausanne. Ooijevaar, T. H., Grooteman, F. P., Warnet, L. L., Loendersloot, R., Akkerman, R. & de Boer, A.Permeability of Non-Crimp Fabric Preforms (2011)In Non-crimp fabric composites: manufacturing, properties and applications (pp. 166-215). Woodhead Publishing. Loendersloot, R.SAMPE Benelux Student Seminar: Book of Abstracts 2011 (2011)[Book/Report › Book] SAMPE Benelux Student Seminar 2011. University of Twente. Loendersloot, R.Simulation and validation of ODS measurements made using a Continuous SLDV method on a beam excited by a pseudo random signal (2011)In Structural Dynamics - Proceedings of the 28th IMAC, A Conference on Structural Dynamics, 2010 (pp. 1-14) (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 3). Di Maio, D., Carloni, G. & Ewins, D. J.Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach (2011)In Proceedings of the 8th International Workshop on Structural Health Monitoring 2011 (pp. 1053-1061). DEStech Publications, Inc. Ooijevaar, T. H., Loendersloot, R., Warnet, L., Akkerman, R. & de Boer, A.Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam (2011)In Vibration and Structural Acoustics Analysis - Current Research and Related Technologies (pp. 121-150). Springer. Loendersloot, R., Ooijevaar, T. H., Warnet, L., de Boer, A. & Akkerman, R.https://doi.org/10.1007/978-94-007-1703-9
2010
Power harvesting using piezomaterial in a helicopter rotor blade (2010)In 17th International Congress on Sound and Vibration 2010, ICSV 2010 (pp. 2769-2776). De Jong, P. H., de Boer, A., Loendersloot, R. & van der Hoogt, P. J. M.Applications of continuous tracking SLDV measurement methods to axially symmetric rotating structures using different excitation methods (2010)Mechanical systems and signal processing, 24(8), 3013-3036. Di Maio, D. & Ewins, D. J.https://doi.org/10.1016/j.ymssp.2010.06.012Actuators for smart applications (2010)In Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (CD Rom) (pp. 1-7). American Society of Mechanical Engineers. Paternoster, A., de Boer, A., Loendersloot, R. & Akkerman, R.Vibration based structural health monitoring of a composite plate with stiffeners (2010)In Proceedings of the ISMA conference (pp. 909-924). Katholieke Universiteit Leuven. Loendersloot, R., Ooijevaar, T. H., Warnet, L., de Boer, A. & Akkerman, R.Power harvesting in helicopter rotorblades (2010)[Contribution to conference › Paper] 17th International Congress on Sound & Vibration, ICSV 2010. de Jong, P., de Boer, A., Loendersloot, R. & van der Hoogt, P.Development of a multigrid finite difference solver for benchmark permeability analysis (2010)[Contribution to conference › Paper] 10th International Conference on Flow Processes in Composite Materials, FPCM-10 2010. Loendersloot, R., Grouve, W. J. B., Akkerman, R. & de Boer, A.Vibration based Structural Health Monitoring of a Composite Plate Structure with Multiple Stiffeners (2010)In Structural Health Monitoring 2010: Proceedings of the Fifth European Workshop (pp. 492-497). DEStech Publications, Inc. Ooijevaar, T. H., Warnet, L., Loendersloot, R., Akkerman, R. & de Boer, A.Auxetic shape memory alloy cellular structures for deployable satellite antennas: Design, manufacture and testing (2010)EPJ Web of Conferences , 6. Article 27001. Scarpa, F., Jacobs, S., Coconnier, C., Toso, M. & Di Maio, D.https://doi.org/10.1051/epjconf/20100627001Application of physical failure models to enable usage and load based maintenance (2010)Reliability engineering & system safety, 95(10), 1061-1075. Tinga, T.https://doi.org/10.1016/j.ress.2010.04.015Cube slip and non-Schmid effects in single crystal Ni-base superalloys (2010)Modelling and simulation in materials science and engineering, 18(1), 015005. Tinga, T., Brekelmans, W. A. M. & Geers, M. G. D.https://doi.org/10.1088/0965-0393/18/1/015005Deflection shape reconstructions of a rotating five-blade helicopter rotor from TLDV measurements (2010)In 9th International Conference on Vibration Measurements by Laser and Noncontact Techniques and Short Course (pp. 17-28) (AIP Conference Proceedings; Vol. 1253). Fioretti, A., Di Maio, D., Ewins, D. J., Castellini, P. & Tomasini, E. P.https://doi.org/10.1063/1.3455457Development of a comprehensive mathematical model for simulating the effects of misalignments in vibration measurements using scanning LDV measurement systems (2010)In 9th International Conference on Vibration Measurements by Laser and Noncontact Techniques and Short Course (pp. 29-41) (AIP Conference Proceedings; Vol. 1253). Di Battista, S., Di Maio, D., Ewins, D. J., Castellini, P. & Tomasini, E. P.https://doi.org/10.1063/1.3455470Vibration based structural health monitoring of a composite T-beam (2010)Composite structures, 92(9), 2007-2015. Ooijevaar, T. H., Loendersloot, R., Warnet, L., de Boer, A. & Akkerman, R.https://doi.org/10.1016/j.compstruct.2009.12.007
2009
Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method (2009)In Proceedings of 3rd International Conference on Integrity, Reliability & Failure. INEGI-instituto de Engenharia mecanica e Gestao Industrial. Loendersloot, R., Ooijevaar, T., Warnet, L., Akkerman, R. & de Boer, A.Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method (2009)In 15th International Conference on Composite Structures, ICCS 15. University of Porto. Ooijevaar, T. H., Loendersloot, R., Warnet, L. L., de Boer, A. & Akkerman, R.Directional coarsening in nickel-base superalloys and its effect on the mechanical properties (2009)Computational materials science, 47(2), 471-481. Tinga, T., Brekelmans, W. A. M. & Geers, M. G. D.https://doi.org/10.1016/j.commatsci.2009.09.013Measurement and comparison of Operational Deflection Shapes (ODSs) using a Scanning LDV system in step or continuous scanning mode (2009)In IMAC-XXVII: Conference and Exposition on Structural Dynamics - Model Verification and Validation (Conference Proceedings of the Society for Experimental Mechanics Series). Di Maio, D. & Ewins, D. J.Multiscale modelling of single crystal superalloys for gas turbine blades (2009)[Thesis › PhD Thesis - Research external, graduation external]. Eindhoven University of Technology. Tinga, T.http://repository.tue.nl/642160Prediction of fretting motion in a controllable pitch propeller during service (2009)Proceedings of the Institution of Mechanical Engineers. Part M. Journal of engineering for the maritime environment, 223(4), 541-560. Godjevac, M., van Beek, T., Grimmelius, H. T., Tinga, T. & Stapersma, D.https://doi.org/10.1243/14750902JEME128Time-incremental creep-fatigue damage rule for single crystal Ni-base superalloys (2009)Materials Science & Engineering A, 508(1-2), 200-208. Tinga, T., Brekelmans, W. A. M. & Geers, M. G. D.https://doi.org/10.1016/j.msea.2008.12.047
2008
Permeability Prediction Using a Multigrid Method (CD-rom) (2008)In 9th International Conference on Flow Processes in Composite Materials (pp. -). Réseau Matériaux Québec. Loendersloot, R., Grouve, W. J. B., Akkerman, R. & van den Berg, S.Transverse permeability of woven fabrics (CD-rom) (2008)In Proceedings of the 11th International ESAFORM conference on Materials Forming (pp. -). Springer. Grouve, W. J. B., Akkerman, R., Loendersloot, R. & van den Berg, S.Impact testing with a continuously-scanning LDV (2008)In IMAC-XXVI: Conference and Exposition on Structural Dynamics - Technologies for Civil Structures (Conference Proceedings of the Society for Experimental Mechanics Series). Ribichini, R., Di Maio, D., Stanbridge, A. B. & Ewins, D. J.Incorporating strain gradient effects in a multiscale constitutive framework for nickel-base superalloys (2008)Philosophical Magazine, 88(30-32), 3793-3825. Tinga, T., Brekelmans, W. A. M. & Geers, M. G. D.https://doi.org/10.1080/14786430802337089Investigations on a novel technique for experimental structural dynamics: Theoretical analysis of impact testing using CSLDV (2008)In Eighth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Article 709807 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 7098). Ribichini, R., Di Maio, D., Stanbridge, A. B. & Ewins, D. J.https://doi.org/10.1117/12.802918Measurement of out-of-plane vibrations of a rotating bladed disk using blade tip timing measurement method (2008)In Eighth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Article 709808 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 7098). Di Maio, D. & Ewins, D. J.https://doi.org/10.1117/12.802927Transverse permeability of woven fabrics (2008)International journal of material forming, 1(1), 859-862. Article Supplement. Grouve, W. J. B., Akkerman, R., Loendersloot, R. & van den Berg, S.https://doi.org/10.1007/s12289-008-0271-1Use of Tracking-Continuous Scanning LDV (T-CSLDV) methods for vibration study of bladed disk assembly under operating conditions (2008)In Institution of Mechanical Engineers - 9th International Conference on Vibrations in Rotating Machinery (pp. 317-330). Di Maio, D. & Ewins, D. J.
2007
Gas Turbine Combustor Liner Life Assessment Using a Combined Fluid/Structural Approach (2007)Journal of engineering for gas turbines and power, 129(1), 69-79. Tinga, T., van Kampen, J. F., de Jager, B. & Kok, J. B. W.https://doi.org/10.1115/1.2360603Identification of damage location using operational deflection shape (ODS) (2007)In IMAC-XXV - Celebrating 25 Years of IMAC (Conference Proceedings of the Society for Experimental Mechanics Series). Di Maio, D., Zang, C. & Ewins, D. J.
2006
A permeability prediction for non-crimp fabrics (2006)In Proceedings of the 8th International conference on Flow Processes in Compostie Materials, FPCM-8, 11-13 November 2006, Douai, France (pp. 73-81). Ecole des Mines de Douai. Loendersloot, R. & Akkerman, R.Experimental investigation of the compressibility and permeability of fabric reinforcements (2006)In The 8th International Conference on Flow Processes in Composite Materials (FPCM-8), 11-13 July 2006, Douai, France (pp. 241-258). Ecole des Mines de Douai. van der Ven, E. C., van de Ven, E. C., Loendersloot, R. & Akkerman, R.Experimental verification of out-of-plane permeability (2006)[Contribution to conference › Paper] 3rd International Symposium on Composites Manufacturing Technology for Aircraft Structures, ISCM-3 2006. van de Ven, E. C., Loendersloot, R. & Akkerman, R.A permeability prediction for non-crimp fabrics (2006)In Proceedings of the International ESAFORM conference on Material Forming, 26-28 April 2006, Glasgow, UK (pp. 799-802). Publishing House AKAPIT. Loendersloot, R. & Akkerman, R.The structure-permeability relation of textile reinforcements (2006)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Loendersloot, R.https://www.persistent-identifier.nl/urn:nbn:nl:ui:28-55931CAISER MYMESIS, a new software platform for virtual and actual vibration testing on rotating structures using a continuously-scanning LDV technique (2006)In Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Article 63450Q (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 6345). Di Maio, D. & Ewins, D. J.https://doi.org/10.1117/12.693081Carbon composite based on Multiaxial Multiply Stiched Preforms. Part V: Geometry of Sheared Biaxial Fabrics (2006)Composites Part A: Applied Science and Manufacturing, 37(1), 103-113. Loendersloot, R., Lomov, S. V., Akkerman, R. & Verpoest, I.https://doi.org/10.1016/j.compositesa.2005.04.013Effect of vibration excitation location on structural damage detection using the CSLDV technique (2006)In IMAC-XXIV: Conference and Exposition on Structural Dynamics - Looking Forward: Technologies for IMAC (Conference Proceedings of the Society for Experimental Mechanics Series). Di Maio, D., Zang, C. & Ewins, D. J.Effect of vibration excitation locations on structural damage detection using the CSLDV technique: Simulation and testing (2006)In Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Article 63450O (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 6345). Di Maio, D., Zampognaro, N., Zang, C. & Ewins, D. J.https://doi.org/10.1117/12.693077Experimental investigation of the compressibility and permeability of fabric reinforcements : abstract (2006)[Contribution to conference › Paper] 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures. van der Ven, E. C., Loendersloot, R. & Akkerman, R.Experimental verification of out-of-plane permeability : powerpoint presentation (2006)[Contribution to conference › Paper] 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures. van der Ven, E. C., Loendersloot, R. & Akkerman, R.FE model updating with the measured data obtained from the CSLDV technique (2006)In Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Article 63450P (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 6345). Zang, C., Di Maio, D., Zampognaro, N. & Ewins, D. J.https://doi.org/10.1117/12.693079Stress intensity factors and crack propagation in a single crystal nickel-based superalloy (2006)Engineering fracture mechanics, 73(12), 1679-1692. Tinga, T.https://doi.org/10.1016/j.engfracmech.2006.02.002
2005
A permeability prediction for non-crimp fabrics (2005)[Contribution to conference › Poster] 8th Engineering Mechanics Symposium, EM 2005. Loendersloot, R. & Akkerman, R.Forming simulation of febre reinforced composites (2005)[Contribution to conference › Poster] 8th Engineering Mechanics Symposium, EM 2005. ten Thije, R. H. W., Loendersloot, R. & Akkerman, R.Carbon Composites based on multiaxial multiply stitched performs, Part 3: Biaxial Tension, picture frame and compression tests of the preforms (2005)Composites Part A: Applied Science and Manufacturing, 36(9), 1188-1206. Lomov, S. V., Barburski, M., Stoilova, T., Verpoest, I., Akkerman, R., Loendersloot, R. & ten Thije, R. H. W.https://doi.org/10.1016/j.compositesa.2005.01.015Comparison of Permeability Experiments and Explanations of Experimental Scatter based on Geometric Models (2005)[Book/Report › Report]. University of Twente. Loendersloot, R. & Akkerman, R.Drape simulation of non-crimp fabrics (2005)In Proceedings of the 8th Esaform Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Rumania (pp. 991-994). The Publishing House of the Romanian Academy. ten Thije, R. H. W., Loendersloot, R. & Akkerman, R.Resin Transfer Moulding Permeability Prediction & Braiding (2005)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Loendersloot, R.Resin Transfer Moulding Permeability Prediction & Braiding (2005)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Loendersloot, R.Resin Transfer Moulding Permeability Prediction & Braiding (2005)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Loendersloot, R.Resin Transfer Moulding Permeability Prediction & Braiding (2005)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Loendersloot, R.Virtual and actual vibration testing on rotating structures using continuously-scanning LDV technique (2005)In IMAC-XXIII: Conference and Exposition on Structural Dynamics - Structural Health Monitoring (Conference Proceedings of the Society for Experimental Mechanics Series). Di Maio, D. & Ewins, D. J.
2004
Multigrid/Network approach based permeability prediction (2004)[Contribution to conference › Poster] 7th Engineering Mechanics Symposium, EM 2004. Loendersloot, R., Ruijter, W. & Akkerman, R.1ste Kwartaalverslag UT-NLR project (2004)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Villa Rodriguez, B. H. & Loendersloot, R.2de kwartaalverslag UT-NLR project (2004)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Villa Rodriguez, B. H. & Loendersloot, R.3de kwartaalverslag UT-NLR project (2004)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Villa Rodriguez, B. H. & Loendersloot, R.4de Kwartaalverslag UT-NLR project (2004)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Villa Rodriguez, B. H. & Loendersloot, R.A permeability prediction for (Un)Sheared non-crimp fabrics (2004)In Proceedings of FPCM-7 (pp. 367-372). University of Delaware. Loendersloot, R., Akkerman, R. & Lomov, S. V.Design of a Through Thickness Permeability Instrument (2004)[Book/Report › Report]. Produktietechniek / Production Technology (PT). Loendersloot, R.Permeability Experiments: Design, development and methodology of a resin transfer moulding measuring device [Abstract] (2004)[Contribution to conference › Paper] 7th Engineering Mechanics Symposium, EM 2004. Loendersloot, R. & Akkerman, R.Permeability prediction of non-crimp fabrics based on a geometric model (2004)In Proceedings of European Conference on Composite Materials (ECCM-11) (pp. -). Loendersloot, R., ten Thije, R. H. W., Akkerman, R. & Lomov, S. V.
2003
Geometry and permeability of non-crimp fabrics (2003)[Contribution to conference › Poster] 6th Engineering Mechanics Symposium, EM 2003. Loendersloot, R., Akkerman, R. & Lomov, S. V.Appendix II: Permeability, drapeability and compressibility - Three Interrelated Properties (2003)[Book/Report › Report]. University of Twente. Akkerman, R., ten Thije, R. H. W. & Loendersloot, R.Architecture and permeability of sheared charbon firbre-crimp fabrics (2003)In Proceedings of SAMPLE Europe Conference (pp. 141-148). Loendersloot, R., Lomov, S. V., Akkerman, R. & Verpoest, I.Material characterisation for finite element simulations of draping with non-crimp fabrics (2003)In Proceedings of the 6th International ESAFORM Conference on Material Forming (pp. 859-862). ten Thije, R. H. W., Loendersloot, R. & Akkerman, R.Permeability Measurements on Devold Triaxial NCF (2003)[Book/Report › Report]. University of Twente. Loendersloot, R.Permeability prediction of a single layer non-crimp fabric (2003)[Book/Report › Report]. University of Twente. Loendersloot, R. & Akkerman, R.Permeability Prediction of Non-Crimp Fabrics Based on a Geometric Model (2003)[Contribution to conference › Paper] 6th Engineering Mechanics Symposium, EM 2003. Loendersloot, R., ten Thije, R. H. W., Akkerman, R. & Lomov, S. V.Quarterly Progress Report UT-NLR RTM project (2003)[Book/Report › Report]. University of Twente. Loendersloot, R., Villa Rodriguez, B. H. & Akkerman, R.Quarterly Progress Report UT-NLR RTM project (2003)[Book/Report › Report]. University of Twente. Loendersloot, R., Villa Rodriguez, B. H. & Akkerman, R.Quarterly Progress Report UT-NLR RTM project (2003)[Book/Report › Report]. University of Twente. Loendersloot, R., Villa Rodriguez, B. H. & Akkerman, R.Quarterly Progress Report UT-NLR RTM project (2003)[Book/Report › Report]. University of Twente. Loendersloot, R., Villa Rodriguez, B. H. & Akkerman, R.
2002
Through-thickness permeability measurements of fibre reinforcements (2002)[Contribution to conference › Poster] 5th Engineering Mechanics Symposium, EM 2002. Loendersloot, R. & Akkerman, R.A least squares approximation of annular flow (2002)In The 6th International Conference on Flow Processes in Composite Materials (pp. 53-62). Loendersloot, R. & Akkerman, R.Definition o developed RVE (unit cell) models (2002)[Book/Report › Report]. Contribution to FALCOM Deliverable D4.2-01. Akkerman, R., Loendersloot, R. & ten Thije, R. H. W.Design of a Permeability Measuring Tool (2002)[Book/Report › Report]. University of Twente. Loendersloot, R.Resin Transfer Moulding Permeability Prediction & Braiding (2002)[Book/Report › Report]. University of Twente. Loendersloot, R. & Villa Rodriguez, B. H.
2001
Resin transfer moulding of high performance composites (2001)[Contribution to conference › Poster] 4th Engineering Mechanics Symposium, EM 2001. Loendersloot, R. & Akkerman, R.