Publications | Department of Design Production & Management

Jump to: 2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2004 | 2002 | 1990

2025

Article

Physically microencapsulated phase change materials for wide range of applicable temperatures (2025)Journal of Energy Storage, 115. Article 115951. Quan, Y. J., Lee, H. T., Chu, W. S., Patakamuri, G., Hsu, S. M. & Ahn, S. H.https://doi.org/10.1016/j.est.2025.115951Surrogate modelling for continuous ergonomic assessment and adaptive configuration of industrial human-centered workplaces (2025)Journal of manufacturing systems, 79, 383-397. Bittencourt, V., Saakes, D. & Thiede, S.https://doi.org/10.1016/j.jmsy.2025.02.001The Need for a Quality Strategy in Metal Additive Manufacturing Technology (2025)Journal of Manufacturing and Materials Processing, 9(2). Article 43. Sithole, C., Jalalian, A., Hoekstra, S. & Gibson, I.https://doi.org/10.3390/jmmp9020043A cyber-physical architecture to monitor human-centric reconfigurable manufacturing systems (2025)Journal of Intelligent Manufacturing. Article 103984 (E-pub ahead of print/First online). Sbaragli, A., Ghafoorpoor, P. Y., Thiede, S. & Pilati, F.https://doi.org/10.1007/s10845-024-02558-1

Conference contribution

Sustainable Manufacturing for SMEs: An Agile Readiness Model of Decarbonization Through Theory and Practice (2025)In Sustainable Manufacturing as a Driver for Growth - Proceedings of the 19th Global Conference on Sustainable Manufacturing (pp. 401-409) (Lecture Notes in Mechanical Engineering). Springer. Tang, X., Yang, S., Qian, Y. & Thiede, S.https://doi.org/10.1007/978-3-031-77429-4_44

2024

Article

More than 10 years of industry 4.0 in the Netherlands: an opinion on promises, achievements, and emerging challenges (2024)International Journal of Sustainable Engineering, 17(1), 1-12. Martinetti, A., Nizamis, K., Chemweno, P. K., Goulas, C., van Dongen, L. A. M., Gibson, I., Thiede, S., Lutters, E., Vaneker, T. H. J. & Bonnema, G. M.https://doi.org/10.1080/19397038.2024.2327380Scaling effects of manufacturing processes and actuation sources on control of remotely powered micro actuators (2024)International journal of robotics research, 43(11), 1809-1830. Heo, J.-K., Kausthubharam, Jung, M., Kim, W., Jeong, S., Song, D.-S., Quan, Y.-J., Jeon, J. H., Ribeiro de Moura, R. & Ahn, S.-H.https://doi.org/10.1177/02783649241235215EU's recycled content targets of lithium-ion batteries are likely to compromise critical metal circularity (2024)One earth, 7(7), 1288-1300. Zhou, H., Yang, Y., Li, W., McKechnie, J., Thiede, S. & Wang, P.https://doi.org/10.1016/j.oneear.2024.06.017Multi-layer edge resource placement optimization for factories (2024)Journal of Intelligent Manufacturing, 35(2), 825-840. Zietsch, J., Kulaga, R., Held, H., Herrmann, C. & Thiede, S.https://doi.org/10.1007/s10845-022-02071-3Investigating the variation of particle distribution and surface texture of top surfaces based on build position in laser powder bed fusion (2024)Procedia CIRP, 123, 446-451. Sithole, C., Hooshmand, H., Todhunter, L., Thompson, A., Hoekstra, S., Jalalian, A., Piano, S. & Gibson, I.https://doi.org/10.1016/j.procir.2024.05.078

Book editing

Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024, Volume 2 (2024)[Book/Report › Book editing]. Springer. Thiede, S. & Lutters, E.https://doi.org/10.1007/978-3-031-65400-8

Conference article

Conference contribution

Machine-learning-enabled Decision Support for Screwdriving Process (2024)In 2024 IEEE 22nd International Conference on Industrial Informatics (INDIN). Yang, Z., Ghafoorpoor Yazdi, P. & Thiede, S.https://doi.org/10.1109/INDIN58382.2024.10774335Interactive digitally supported design of human-centric workplaces in learning factories (2024)In Learning Factories of the Future - Proceedings of the 14th Conference on Learning Factories 2024 (pp. 241-248) ( Lecture Notes in Networks and Systems; Vol. 1059). Springer. Bittencourt Lima, V., Spitzhirn, M. & Thiede, S.https://doi.org/10.1007/978-3-031-65411-4_29An autonomous edge box system architecture for Industrial IoT applications (2024)In Proceedings - 2024 IEEE 22nd International Conference on Industrial Informatics, INDIN 2024 (Proceedings IEEE International Conference on Industrial Informatics (INDIN); Vol. 2024). IEEE. Guo, C., Yang, S. & Thiede, S.https://doi.org/10.1109/INDIN58382.2024.10774355Circular Manufacturing Systems in Learning Factories (2024)In Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024 (pp. 374-381) (Lecture Notes in Networks and Systems; Vol. 1059). Springer. Thiede, S., Yang, S. & Yazdi, P. G.https://doi.org/10.1007/978-3-031-65411-4_44Cyber Physical System for Reconfigurable Learning Factories: Combining 3D Simulations, Reconfigurable Layouts and Real-Time Locating Systems (2024)In Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024 (pp. 28-35) (Lecture Notes in Networks and Systems; Vol. 1059). Springer. Ghafoorpoor Yazdi, P., Sbaragli, A., Peters, L., Pilati, F. & Thiede, S.https://doi.org/10.1007/978-3-031-65411-4_4Development of an IALF Overarching Learning Module for Circular Economy (2024)In Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024 (pp. 366-373) (Lecture Notes in Networks and Systems; Vol. 1059). Springer. Barth, J., Ruzicic, N., Mennenga, M., Panagiotopoulou, V., Wolf, M., Ayroa, R. V., Sattari, M., Köppe, G., Weyand, A., Seyfried, S., Mangers, J., Thiede, S., Niemeyer, J. F., Khoulenjani, Z. G., Petrusch, N., Metternich, J., Weigold, M., Herrmann, C., Hummel, V., … Stavropoulos, P.https://doi.org/10.1007/978-3-031-65411-4_43

Foreword/postscript

Preface (2024)In Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024 (pp. v-vi) (Lecture Notes in Networks and Systems; Vol. 1059). Springer. Thiede, S. & Lutters, E.Preface (2024)In Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024 (pp. v-vi) (Lecture Notes in Networks and Systems; Vol. 1060). Springer. Thiede, S. & Lutters, E.

Paper

Battery Performance Metrics for Large Electric Passenger Aircraft (2024)[Contribution to conference › Paper] 34th Congress of the International Council of Aeronautical Sciences, ICAS 2024. de Vries, R., Wolleswinkel, R. E., Rosen Jacobsen, D., Bonnema, G. M. & Thiede, S.

2023

Article

Effect of fiber entanglement in chopped glass fiber reinforced composite manufactured via long fiber spray-up molding (2023)Heliyon, 9(12). Article e22170. Jeon, J. H., Yoon, C. K., Quan, Y.-J., Choi, J. Y., Hong, S., Lee, W. I., Kwon, K.-K. & Ahn, S.-H.https://doi.org/10.1016/j.heliyon.2023.e22170Machine learning based internal and external energy assessment of automotive factories (2023)CIRP annals : manufacturing technology, 72(1), 21-24. Flick, D., Vruna, M., Bartos, M., Ji, L., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.cirp.2023.04.038Smart Factory Transformation Using Industry 4.0 toward ESG Perspective: A Critical Review and Future Direction (2023)International Journal of Precision Engineering and Manufacturing Smart Technology, 1(2), 165-185 (E-pub ahead of print/First online). Kim, H., Quan, Y.-J., Jung, G., Lee, K.-W., Jeong, S., Yun, W.-J., Park, S. & Ahn, S.-H.https://doi.org/10.57062/ijpem-st.2022.0073Real Time Locating Systems (RTLS) – An Enabling Technology to Support Engineering Education within Learning Factories (2023)SSRN ELibrary. Sullivan, B. P., Ghafoorpoor Yazdi, P. & Thiede, S.https://doi.org/10.2139/ssrn.4470408

Chapter

Manufacturing (2023)In Energy-Related Material Flow Simulation in Production and Logistics (pp. 27-53). Springer International Publishing. Thiede, S., Dér, A., Münnich, M. & Sobottka, T.https://doi.org/10.1007/978-3-031-34218-9_2

Conference article

Advanced energy data analytics to predict machine overall equipment effectiveness (OEE): a synergetic approach to foster sustainable manufacturing (2023)Procedia CIRP, 116, 438-443. Thiede, S.https://doi.org/10.1016/j.procir.2023.02.074Circularity of water - good for conscience or the environment?: A deeper look into the water footprint of factories (2023)Procedia CIRP, 116, 125-130. Berger, M. & Thiede, S.https://doi.org/10.1016/j.procir.2023.02.022Integrated lean and ergonomic assessment for the planning of human-centered factories (2023)Procedia CIRP, 120, 344-349. Bittencourt, V., Buchbinder, M., Saakes, D. & Thiede, S.https://doi.org/10.1016/j.procir.2023.08.061Methodology for systematic design of cleanroom assembly workstations (2023)Procedia CIRP, 120, 410-415. Groeneveld, T., Ghafoorpoor, P., Huisken, M. & Thiede, S.https://doi.org/10.1016/j.procir.2023.09.011Total Cost of Ownership of Real-Time Locating System (RTLS) Technologies in Factories (2023)Procedia CIRP, 120, 822-827. Patrick Sullivan, B., Yazdi, P. G. & Thiede, S.https://doi.org/10.1016/j.procir.2023.09.082

Review article

Current Applications and Development of Composite Manufacturing Processes for Future Mobility (2023)International Journal of Precision Engineering and Manufacturing - Green Technology, 10(1), 269-291. Choi, J. Y., Jeon, J. H., Lyu, J. H., Park, J., Kim, G. Y., Chey, S. Y., Quan, Y.-J., Bhandari, B., Prusty, B. G. & Ahn, S.-H.https://doi.org/10.1007/s40684-022-00483-3

2022

Article

A Camera-Based Structural Color Sensor Using Image Processing Algorithm with RGB to Hue Transformation (2022)Advanced Materials Technologies, 7(10). Article 2101671. Quan, Y.-J., Min, S.-H., Hong, S., Jeon, J. H., Kim, W.-J. & Ahn, S.-H.https://doi.org/10.1002/admt.202101671Energy efficiency of Heating, Ventilation and Air Conditioning systems in production environments through model-predictive control schemes: The case of battery production (2022)Journal of cleaner production, 350. Article 131354. Vogt, M., Buchholz, C., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.jclepro.2022.131354Integration of Energy Oriented Manufacturing Simulation into the Life Cycle Evaluation of Lightweight Body Parts (2022)International Journal of Precision Engineering and Manufacturing - Green Technology, 9(3), 899-918. Dér, A., Kaluza, A., Reimer, L., Herrmann, C. & Thiede, S.https://doi.org/10.1007/s40684-021-00412-wSynergetic Modelling of Energy and Resource Efficiency as well as Occupational Safety and Health Risks of Plating Process Chains (2022)International Journal of Precision Engineering and Manufacturing - Green Technology, 9, 795-815. Leiden, A., Thiede, S. & Herrmann, C.https://doi.org/10.1007/s40684-021-00402-ySurface Nanopatterned Shape Memory Alloy (SMA)-Based Photosensitive Artificial Muscle (2022)Advanced Optical Materials, 10(5). Article 2102024. Kim, M.-S., Lee, H.-S., Cho, Y., Heo, J. K., Quan, Y.-J., Lee, S. W., Pahk, H. J. & Ahn, S.-H.https://doi.org/10.1002/adom.202102024Systematic Development of Sustainability-Oriented Cyber-Physical Production Systems (2022)Sustainability (Switzerland), 14(4). Article 2080. Rogall, C., Mennenga, M., Herrmann, C. & Thiede, S.https://doi.org/10.3390/su14042080Crackless glass through-structure fabrication with laser-induced backside wet etching using detachably bonded cover (2022)CIRP annals : manufacturing technology, 71(1), 161-164. Kwon, K.-K., Song, D.-S., Quan, Y.-J., Jeon, J. H. & Ahn, S.-H.https://doi.org/10.1016/j.cirp.2022.04.025Potentials and technical implications of tag based and AI enabled optical real-time location systems (RTLS) for manufacturing use cases (2022)CIRP annals : manufacturing technology, 71(1), 401-404. Thiede, S., Ghafoorpoor, P., Sullivan, B. P., Bienia, S., Demes, M. & Dröder, K.https://doi.org/10.1016/j.cirp.2022.04.023

Chapter

Cyber Physical Production Systems and Their Role for Decarbonization of Industry (2022)In Intelligent Decarbonisation: Can Artificial Intelligence and Cyber-Physical Systems Help Achieve Climate Mitigation Targets? (pp. 75-86) ( Lecture Notes in Energy (LNE); Vol. 86). Springer. Thiede, S.https://doi.org/10.1007/978-3-030-86215-2_8

2021

Article

Machine learning and simulation-based surrogate modeling for improved process chain operation (2021)International journal of advanced manufacturing technology, 117(7-8), 2297-2307. Hürkamp, A., Gellrich, S., Dér, A., Herrmann, C., Dröder, K. & Thiede, S.https://doi.org/10.1007/s00170-021-07084-5Economic assessment for additive manufacturing of automotive end-use parts through digital light processing (DLP) (2021)CIRP journal of manufacturing science and technology, 35, 268-280. Wiese, M., Kwauka, A., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.cirpj.2021.06.020Versatile IT-system architecture for smart manufacturing solutions: the example for green manufacturing (2021)International journal of computer integrated manufacturing, 34(10), 1067-1085. Plank, M., Thiede, S. & Herrmann, C.https://doi.org/10.1080/0951192X.2021.1963478Data-driven failure mode and effect analysis (FMEA) to enhance maintenance planning (2021)Computers in industry, 129. Article 103451. Filz, M.-A., Langner, J. E. B., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.compind.2021.103451Modelling and analysis of the energy intensity in polyacrylonitrile (PAN) precursor and carbon fibre manufacturing (2021)Journal of cleaner production, 303. Article 127105. Dér, A., Dilger, N., Kaluza, A., Creighton, C., Kara, S., Varley, R., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.jclepro.2021.127105Battery production design using multi-output machine learning models (2021)Energy Storage Materials, 38, 93-112. Turetskyy, A., Wessel, J., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.ensm.2021.03.002Interoperable nanoparticle sensor capable of strain and vibration measurement for rotor blade monitoring (2021)Sensors (Switzerland), 21(11). Article 3648. Min, S. H., Quan, Y.-J., Park, S.-Y., Lee, G.-Y. & Ahn, S.-H.https://doi.org/10.3390/s21113648Supercritical carbon dioxide and minimum quantity lubrication in pendular surface grinding – A feasibility study (2021)Journal of cleaner production, 296. Article 126560. Arafat, R., Madanchi, N., Thiede, S., Herrmann, C. & Skerlos, S. J.https://doi.org/10.1016/j.jclepro.2021.126560Combining Life Cycle Assessment and Manufacturing System Simulation: Evaluating Dynamic Impacts from Renewable Energy Supply on Product-Specific Environmental Footprints (2021)International Journal of Precision Engineering and Manufacturing - Green Technology, 8(3), 1007-1026. Rödger, J.-M., Beier, J., Schönemann, M., Schulze, C., Bey, N., Thiede, S., Herrmann, C. & Hauschild, M.https://doi.org/10.1007/s40684-020-00229-zLithography-free and Highly Angle Sensitive Structural Coloration Using Fabry–Perot Resonance of Tin (2021)International Journal of Precision Engineering and Manufacturing - Green Technology, 8(3), 997-1006. Kim, Y.-G., Quan, Y.-J., Kim, M.-S., Cho, Y. & Ahn, S.-H.https://doi.org/10.1007/s40684-021-00324-9Cyber-Physical Production Systems (CPPS): Introduction (2021)Journal of Manufacturing and Materials Processing, 5(1). Article 24. Thiede, S.https://doi.org/10.3390/jmmp5010024How to Make Augmented Reality a Tool for Railway Maintenance Operations: Operator 4.0 Perspective (2021)Applied Sciences, 11(6). Article 2656. Scheffer, S., Martinetti, A., Damgrave, R., Thiede, S. & van Dongen, L.https://doi.org/10.3390/app11062656Data based analysis and improvement of energy efficiency in the automotive body shop (2021)Journal of cleaner production, 284. Article 125269. Teiwes, H., Rössinger, M., Gonter, M., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.jclepro.2020.125269Cyber-physical production system approach for energy and resource efficient planning and operation of plating process chains (2021)Journal of cleaner production, 280(Part 2). Article 125160. Leiden, A., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.jclepro.2020.125160

Conference article

Conference contribution

Importance of Characterizing the Variability for Batch Production using Laser Powder Bed Fusion (2021)In 22nd Annual International RAPDASA Conference (pp. 174-178). Sithole, C., Hoekstra, S. & Gibson, I.https://site.rapdasa.org/wp-content/uploads/2022/07/2021-RAPDASA-PROCEEDINGS-ISBN-978-0-6397-0111-0.pdf

2020

Article

Chapter

Refining Circulation Factories: Classification Scheme and Supporting Product and Factory Features for Closed-Loop Production Integration (2020)In Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 (pp. 591-601) (Lecture Notes in Production Engineering; Vol. Part F1136). Springer. Rickert, J., Blömeke, S., Mennenga, M., Cerdas, F. & Thiede, S.https://doi.org/10.1007/978-3-662-62138-7_593-CYCLE—A modular process chain for recycling of plastic waste with filament-based 3D printing for learning factories (2020)In Enhancing Future Skills and Entrepreneurship: 3rd Indo-German Conference on Sustainability in Engineering (pp. 79-87) (Sustainable Production, Life Cycle Engineering and Management). Springer. Juraschek, M., Büth, L., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-030-44248-4_8Choosing products for decentralized manufacturing: Utilizing recycled 3D printing filament in India and Germany (2020)In Enhancing Future Skills and Entrepreneurship: 3rd Indo-German Conference on Sustainability in Engineering (pp. 31-39) (Sustainable Production, Life Cycle Engineering and Management). Springer. Büth, L., Juraschek, M., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-030-44248-4_4Data analytics of energy and compressed air flows for process and quality monitoring in electro-pneumatic handling systems (2020)In Enhancing Future Skills and Entrepreneurship: 3rd Indo-German Conference on Sustainability in Engineering (pp. 109-116) (Sustainable Production, Life Cycle Engineering and Management). Springer. Rolinck, M., Gellrich, S., Herrmann, C. & Thiede, S.https://doi.org/10.1007/978-3-030-44248-4_11Energetische Analyse von biokunststoffverarbeitenden Produktionsprozessen--Beispiel Spritzgießverfahren (2020)In Biokunststoffe unter dem Blickwinkel der Nachhaltigkeit und Kommunikation (pp. 55-68). Springer. Schulze, C., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-658-27795-6_5

Conference article

Simulation-based assessment of quality inspection strategies on manufacturing systems (2020)Procedia CIRP, 93, 777-782. Filz, M. A., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.04.069Data-driven cyber-physical system for quality gates in lithium-ion battery cell manufacturing (2020)Procedia CIRP, 93, 168-173. Turetskyy, A., Wessel, J., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.03.077Machine learning based analysis of factory energy load curves with focus on transition times for anomaly detection (2020)Procedia CIRP, 93, 461-466. Flick, D., Keck, C., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.04.073Tracking and tracing for data mining application in the lithium-ion battery production (2020)Procedia CIRP, 93, 162-167. Wessel, J., Turetskyy, A., Wojahn, O., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.03.071Event-based education and innovation in Learning Factories--concept and evaluation from Hackathon to GameJam (2020)Procedia manufacturing, 45, 43-48. Juraschek, M., Büth, L., Martin, N., Pulst, S., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.promfg.2020.04.057Integrating virtual and physical production processes in learning factories (2020)Procedia manufacturing, 45, 121-127. Büth, L., Juraschek, M., Sangwan, K. S., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.promfg.2020.04.082A Mixed Reality application for studying the improvement of HVAC systems in learning factories (2020)Procedia manufacturing, 45, 373-378. Czarski, M., Ng, Y. T., Vogt, M., Juraschek, M., Thiede, B., Tan, P. S., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.promfg.2020.04.039Architecture and development approach for integrated cyber-physical production-service systems (CPPSS) (2020)Procedia CIRP, 90, 742-747. Mennenga, M., Rogall, C., Yang, C.-J., Wölper, J., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.02.050Assessment of smart manufacturing solutions based on extended value stream mapping (2020)Procedia CIRP, 93, 371-376. Martin, N. L., Dér, A., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.04.019Data-driven analysis of product state propagation in manufacturing systems using visual analytics and machine learning (2020)Procedia CIRP, 93, 449-454. Filz, M. A., Gellrich, S., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.procir.2020.03.065Multi-Criteria Optimization in the Production of Lithium-Ion Batteries (2020)Procedia manufacturing, 43, 720-727. Kornas, T., Wittmann, D., Daub, R., Meyer, O., Weihs, C., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.promfg.2020.02.113

Patent

BLISTER PACK (2020)[Patent › Patent]. Thiede, S., Stange, O., Höhl, J.-W., Diederich, R., öder, K., Herrmann, C., Dietrich, F., Blumenthal, P., Stühm, K., Bobka, P. & Schmidt, C.

Preprint

Root Cause Analysis in Lithium-Ion Battery Production with FMEA-Based Large-Scale Bayesian Network (2020)[Working paper › Preprint]. Kirchhof, M., Haas, K., Kornas, T., Thiede, S., Hirz, M. & Herrmann, C.https://arxiv.org/abs/2006.03610

Review article

Rapid manufacturing of automotive polymer series parts: A systematic review of processes, materials and challenges (2020)Additive manufacturing, 36. Article 101582. Wiese, M., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.addma.2020.101582

2019

Article

Colour-tunable 50% strain sensor using surface-nanopatterning of soft materials via nanoimprinting with focused ion beam milling process (2019)CIRP annals : manufacturing technology, 68(1), 595-598. Quan, Y.-J., Kim, M.-S., Kim, Y. & Ahn, S.-H.https://doi.org/10.1016/j.cirp.2019.04.037Cooling tower management in manufacturing companies: A cyber-physical system approach (2019)Journal of cleaner production, 211, 428-441. Schulze, C., Thiede, S., Thiede, B., Kurle, D., Blume, S. & Herrmann, C.https://doi.org/10.1016/j.jclepro.2018.11.184Cutting fluid emissions in grinding processes: influence of process parameters on particle size and mass concentration (2019)International journal of advanced manufacturing technology, 101, 773-783. Madanchi, N., Leiden, A., Winter, M., Asbach, C., Lindermann, J., Herrmann, C. & Thiede, S.https://doi.org/10.1007/s00170-018-2934-5Data mining in battery production chains towards multi-criterial quality prediction (2019)CIRP annals : manufacturing technology, 68(1), 463-466. Thiede, S., Turetskyy, A., Kwade, A., Kara, S. & Herrmann, C.https://doi.org/10.1016/j.cirp.2019.04.066Implementation of a cyber-physical cooling storage station in a learning factory (2019)Procedia manufacturing, 31, 142-147. Vogt, M., Uhlig, B., Sangwan, K. S., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.promfg.2019.03.022Load profile analysis for reducing energy demands of production systems in non-production times (2019)Applied energy, 117-130. Dehning, P., Blume, S., Dér, A., Flick, D., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.apenergy.2019.01.047Multiscale simulation approach for production systems: Application to the production of lithium-ion battery cells (2019)International journal of advanced manufacturing technology, 102, 1373-1390. Schönemann, M., Bockholt, H., Thiede, S., Kwade, A. & Herrmann, C.https://doi.org/10.1007/s00170-018-3054-y

Book editing

Eco-Factories of the Future (2019)[Book/Report › Book editing]. Springer. Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-319-93730-4

Chapter

PERFoRM Methods and Tools (2019)In Digitalized and Harmonized Industrial Production Systems. CRC Press (Taylor & Francis). Thiede, S., Büth, L., Neef, B., Ogun, P., Lohse, N., Obst, B., Rahman, M. & Barbosa, J.https://doi.org/10.1201/9780429263316-7Cyber-physical approach for integrated energy and maintenance management (2019)In Eco-Factories of the Future (pp. 103-125) (Sustainable Production, Life Cycle Engineering and Management). Springer. Neef, B., Schulze, C., Posselt, G., Herrmann, C. & Thiede, S.https://doi.org/10.1007/978-3-319-93730-4_6Development of a sustainability assessment tool for manufacturing companies (2019)In Sustainable Production, Life Cycle Engineering and Management (pp. 41-68) (Sustainable Production, Life Cycle Engineering and Management). Springer. Madanchi, N., Thiede, S., Sohdi, M. & Herrmann, C.https://doi.org/10.1007/978-3-319-93730-4_3Integrating variable renewable electricity supply into manufacturing systems (2019)In Eco-Factories of the Future (pp. 17-40) (Sustainable Production, Life Cycle Engineering and Management). Springer. Beier, J., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-319-93730-4_2Life Cycle Assessment of Industrial Cooling Towers (2019)In Progress in Life Cycle Assessment (pp. 135-146) (Sustainable Production, Life Cycle Engineering and Management). Springer. Schulze, C., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-319-92237-9_15Towards eco-factories of the future (2019)In Eco-Factories of the Future (pp. 1-15) (Sustainable Production, Life Cycle Engineering and Management). Springer. Kurle, D., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-319-93730-4_1

Conference article

Conference contribution

Artificial neural network enabled P2D model deployment for end-of-line battery cell characterization (2019)In 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). IEEE. Turetskyy, A., Laue, V., Lamprecht, R., Thiede, S., Krewer, U. & Herrmann, C.https://doi.org/10.1109/INDIN41052.2019.8972181Conceptual framework for manufacturing data preprocessing of diverse input sources (2019)In IEEE International Conference on Industrial Informatics (INDIN) (pp. 1041-1046) (IEEE International Conference on Industrial Informatics (INDIN); Vol. 2019). IEEE. Flick, D., Gellrich, S., Filz, M.-A., Ji, L., Thiede, S. & Herrmann, C.https://doi.org/10.1109/INDIN41052.2019.8972327Data-and expert-driven analysis of cause-effect relationships in the production of lithium-ion batteries (2019)In 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE). IEEE. Kornas, T., Daub, R., Karamat, M. Z., Thiede, S. & Herrmann, C.https://doi.org/10.1109/COASE.2019.8843185Edge computing for the production industry a systematic approach to enable decision support and planning of edge (2019)In 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). IEEE. Zietsch, J., Weinert, N., Herrmann, C. & Thiede, S.https://doi.org/10.1109/INDIN41052.2019.8972193Feature selection based on visual analytics for quality prediction in aluminium die casting (2019)In 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). IEEE. Gellrich, S., Beganovic, T., Mattheus, A., Herrmann, C. & Thiede, S.https://doi.org/10.1109/INDIN41052.2019.8972093Modelling the Impact of Manufacturing Uncertainties on Lithium-Ion Batteries (2019)In Lithium Ion Batteries and Beyond. Article 367 (ECS Meeting Abstracts; Vol. MA2019-01). Institute of Physics (IOP). Schmidt, O., Thomitzek, M., Röder, F., Thiede, S., Herrmann, C. & Krewer, U.https://doi.org/10.1149/MA2019-01/2/367Simulation-Based Data Analysis to Support the Planning of Flexible Manufacturing Systems (2019)In Simulation in Produktion und Logistik 2019. Verlag Wissenschaftliche Scripten. Filz, M.-A., Herrmann, C. & Thiede, S.Urban Factories: Identifying Products for Production in Cities (2019)In Technologies and Eco-innovation towards Sustainability I: Eco Design of Products and Services (pp. 185-198). Springer. Herrmann, C., Juraschek, M., Kara, S. & Thiede, S.https://doi.org/10.1007/978-981-13-1181-9Urban Factories - Identification of Measures for Resource-Efficient Integration of Production Systems in Cities (2019)In Advances in Production, Logistics and Traffic: Proceedings of the 4th Interdisciplinary Conference on Production Logistics and Traffic 2019 (pp. 221-232) (Lecture Notes in Logistics). Springer. Juraschek, M., Kreuz, F., Bucherer, M., Spengler, A., Thiede, S., Herrmann, C., Schmidt, A. & Clausen, U.https://doi.org/10.1007/978-3-030-13535-5_16

2018

Article

Integrated Computational Life Cycle Engineering — Application to the case of electric vehicles (2018)CIRP annals : manufacturing technology, 67(1), 25-28. Cerdas, F., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.cirp.2018.04.052

Chapter

Disassembly Planning and Assessment of Automation Potentials for Lithium-Ion Batteries (2018)In Recycling of Lithium-Ion Batteries: The LithoRec Way (pp. 83-97) (Sustainable Production, Life Cycle Engineering and Management). Springer. Cerdas, F., Gerbers, R., Andrew, S., Schmitt, J., Dietrich, F., Thiede, S., Dröder, K. & Herrmann, C.https://doi.org/10.1007/978-3-319-70572-9_5Environmental Aspects of the Recycling of Lithium-Ion Traction Batteries (2018)In Recycling of Lithium-Ion Batteries: The LithoRec Way (pp. 267-288) (Sustainable Production, Life Cycle Engineering and Management). Springer. Cerdas, F., Andrew, S., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-319-70572-9_16Toolbox zur Steigerung der Ressourceneffizienz im metallverarbeitenden Gewerbe (2018)In Nachhaltige Betriebliche Umweltinformationssysteme: Konferenzband zu den 9. BUIS-Tagen (pp. 235-251). Springer. Blume, S., Kurle, D., Herrmann, C. & Thiede, S.https://doi.org/10.1007/978-3-658-20380-1

Conference article

Conference contribution

Tool Wear and Surface Quality Monitoring Using High Frequency CNC Machine Tool Current Signature (2018)In Proceedings - IEEE 16th International Conference on Industrial Informatics, INDIN 2018 (pp. 1045-1050). Article 8472037. IEEE. Neef, B., Bartels, J. & Thiede, S.https://doi.org/10.1109/INDIN.2018.8472037Assessment of battery cell assembly through non-invasive cell characterization using X-ray computer tomography (2018)In 31st International Electric Vehicle Symposium & Exhibition and International Electric Vehicle Technology Conference (EVS31 & EVTeC 2018): Kobe, Japan, 1-3 October 2018 (pp. 402-407). Curran Associates Inc.. Turetskyy, A., Leithoff, R., Xu, W., Thiede, S., Dietrich, F., Dröder, K. & Herrmann, C.Automated evaluation of battery materials for more efficient and effective battery development (2018)In 31st International Electric Vehicle Symposium & Exhibition and International Electric Vehicle Technology Conference (EVS31 & EVTeC 2018) (pp. 387-393). Curran Associates Inc.. Bockwinkel, K., Thiede, B., Dietrich, F., Thiede, S., Dröder, K. & Herrmann, C.

PhD Thesis - Research UT, graduation UT

Designing future factories: A novel approach to configuring production systems by combining set-based and automated design (2018)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Unglert, J. M.https://doi.org/10.3990/1.9789036544870

Review article

Smart Machining Process Using Machine Learning: A Review and Perspective on Machining Industry (2018)International Journal of Precision Engineering and Manufacturing - Green Technology, 5(4), 555-568. Kim, D. H., Kim, T. J. Y., Wang, X., Kim, M., Quan, Y.-J., Oh, J. W., Min, S.-H., Kim, H., Bhandari, B., Yang, I. & Ahn, S.-H.https://doi.org/10.1007/s40684-018-0057-yMachine health management in smart factory: A review (2018)Journal of Mechanical Science and Technology, 32(3), 987-1009. Lee, G.-Y., Kim, M., Quan, Y.-J., Kim, M.-S., Kim, T. J. Y., Yoon, H.-S., Min, S., Kim, D.-H., Mun, J.-W., Oh, J. W., Choi, I. G., Kim, C.-S., Chu, W.-S., Yang, J., Bhandari, B., Lee, C.-M., Ihn, J.-B. & Ahn, S.-H.https://doi.org/10.1007/s12206-018-0201-1

2017

Article

Bereichsübergreifende, offene vernetzung heterogener informationssysteme in fabrikumgebungen: Am beispiel einer offenen plattform für energieeinsparungen (2017)Zeitschrift für wirtschaftlichen Fabrikbetrieb = ZWF, 112(12), 860-864. Plank, M., Linzbach, J., Kurze, C., Thiede, S. & Herrmann, C.https://doi.org/10.3139/104.111845Analyse und prognose des Energiebedarfs im Karosseriebau (2017)Zeitschrift für wirtschaftlichen Fabrikbetrieb = ZWF, 112(9), 572-575. Teiwes, H., Thiede, S., Rössinger, M. & Herrmann, C.https://doi.org/10.3139/104.111778Integration von Produktionsdaten zur lebenszykluskostenorientierten Prozesskettenplanung: Verknüpfung von Betriebs-, Stamm- und Planungsdaten auf Basis OPC UA und AutomationML (2017)Zeitschrift für wirtschaftlichen Fabrikbetrieb = ZWF, 112(9), 540-543. Labbus, I., Schmidt, C., Thiede, S. & Herrmann, C.https://doi.org/10.3139/104.111775Energy flexibility of manufacturing systems for variable renewable energy supply integration: Real-time control method and simulation (2017)Journal of cleaner production, 141, 648-661. Beier, J., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.jclepro.2016.09.040Factors influencing the energy intensity of automotive manufacturing plants (2017)Journal of cleaner production, 142(Part 4), 2305-2314. Dehning, P., Thiede, S., Mennenga, M. & Herrmann, C.https://doi.org/10.1016/j.jclepro.2016.11.046Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System (2017)Journal of industrial ecology, 21(S1), S80-S93. Cerdas, F., Juraschek, M., Thiede, S. & Herrmann, C.https://doi.org/10.1111/jiec.12618The water–energy nexus in manufacturing systems: Framework and systematic improvement approach (2017)CIRP annals : manufacturing technology, 66(1), 49-52. Thiede, S., Kurle, D. & Herrmann, C.https://doi.org/10.1016/j.cirp.2017.04.108Unlocking water efficiency improvements in manufacturing — From approach to tool support (2017)CIRP journal of manufacturing science and technology, 19, 7-18. Kurle, D., Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.cirpj.2017.02.004

Chapter

Industrie 4.0 und die Steigerung der Energieeffizienz in der Produktion (2017)In Handbuch Industrie 4.0: Geschäftsmodelle, Prozesse, Technik (pp. 279-292). Hanser Verlag. Thiede, S., Posselt, G. & Herrmann, C.https://doi.org/10.3139/9783446449893.011

Conference article

Conference contribution

Evaluating a computational support tool for set-based configuration of production systems: Results from an industrial case (2017)In 12th System of Systems Engineering Conference, SoSE 2017. Article 7994939. IEEE. Unglert, J., Hoekstra, S. & Jauregui-Becker, J.https://doi.org/10.1109/SYSOSE.2017.7994939Introducing agent-based simulation of manufacturing systems to industrial discrete-event simulation tools (2017)In 2017 IEEE 15th International Conference on Industrial Informatics, INDIN 2017: Proceedings (pp. 1141-1146) (IEEE International Conference on Industrial Informatics (INDIN); Vol. 2017). IEEE. Buth, L., Broderius, N., Herrmann, C. & Thiede, S.https://doi.org/10.1109/INDIN.2017.8104934

2016

Article

Development of Design Support Tool for New Lean Production Systems (2016)Procedia CIRP, 41, 596-601. de Kogel-Polak, W. & Jauregui Becker, J. M.https://doi.org/10.1016/j.procir.2016.01.009Analyse und Gestaltung von Fabriklebenszyklen (2016)Zeitschrift für wirtschaftlichen Fabrikbetrieb = ZWF, 111(6), 333-336. Schmidt, C., Nielsen, L., Thiede, S., Schmidt, M., Herrmann, C. & Nyhuis, P.https://doi.org/10.3139/104.111537An integrated approach for improving energy efficiency of manufacturing process chains (2016)International Journal of Sustainable Engineering, 9(1), 11-24. Mousavi, S., Thiede, S., Li, W., Kara, S. & Herrmann, C.https://doi.org/10.1080/19397038.2014.1001470Comparison of mold designs for SMA-based twisting soft actuator (2016)Sensors and Actuators A: Physical, 237, 96-106. Rodrigue, H., Wang, W., Han, M.-W., Quan, Y.-J. & Ahn, S.-H.https://doi.org/10.1016/j.sna.2015.11.026Computational Design Synthesis of reconfigurable cellular manufacturing systems: a design engineering model (2016)Procedia CIRP, 57, 374-379. Unglert, J. M., Jauregui Becker, J. M. & Hoekstra, S.https://doi.org/10.1016/j.procir.2016.11.065Multi-level simulation in manufacturing companies: The water-energy nexus case (2016)Journal of cleaner production, 139, 1118-1127. Thiede, S., Schönemann, M., Kurle, D. & Herrmann, C.https://doi.org/10.1016/j.jclepro.2016.08.144Reliability made easy (2016)Kunststoffe International, 106, 14-18. Dröder, K., Herrmann, C., Müller, A., Thiede, S., Kühn, M., Schmidt, C., Brand, M. & Gebken, T.https://kunststoffe-live.censhare.de/en/journal/archive/article/new-mold-and-processing-technologies-increase-the-competitiveness-of-eco-efficient-frp-metal-composite-hybrid-components--1397824.htmlSustainability Cockpit: An integrated tool for continuous assessment and improvement of sustainability in manufacturing (2016)CIRP annals : manufacturing technology, 65(1), 5-8. Li, W., Alvandi, S., Kara, S., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.cirp.2016.04.029

Conference article

Conference contribution

Supporting the design of reconfigurable cellular manufacturing systems by computational design synthesis (2016)In DS 84: Proceedings of the DESIGN 2016 14th International Design Conference (pp. 1417-1426). The Design Society. Unglert, J. M., Hoekstra, S. & Jauregui Becker, J. M.Coexisting wireless sensor networks in cyber-physical production systems (2016)In 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE. Cammin, C., Krush, D., Scholl, G., Heynicke, R., Schulze, C., Thiede, S. & Herrmann, C.https://doi.org/10.1109/ETFA.2016.7733593

Review article

A review on fabrication processes for electrochromic devices (2016)International Journal of Precision Engineering and Manufacturing - Green Technology, 3(4), 397-421. Park, S.-I., Quan, Y.-J., Kim, S.-H., Kim, H., Kim, S., Chun, D.-M., Lee, C. S., Taya, M., Chu, W.-S. & Ahn, S.-H.https://doi.org/10.1007/s40684-016-0049-8

2015

Article

A smart soft actuator using a single shape memory alloy for twisting actuation (2015)Smart Materials and Structures, 24(12). Article 125033. Shim, J.-E., Quan, Y.-J., Wang, W., Rodrigue, H., Song, S.-H. & Ahn, S.-H.https://doi.org/10.1088/0964-1726/24/12/125033A methodology for customized prediction of energy consumption in manufacturing industries (2015)International Journal of Precision Engineering and Manufacturing - Green Technology, 2(2), 163-172. Schmidt, C., Li, W., Thiede, S., Kara, S. & Herrmann, C.https://doi.org/10.1007/s40684-015-0021-zDirect digital manufacturing: Definition, evolution, and sustainability implications (2015)Journal of cleaner production, 107, 615-625. Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G. & Thiede, S.https://doi.org/10.1016/j.jclepro.2015.05.009Enabling lean design of biomethane gas distribution grids (2015)Gas for energy, 1, 48-52. Weidenaar, T., Jauregui Becker, J. M. & Hoekstra, S.https://www.vulkan-shop.de/enabling-lean-design-of-biomethane-gas-distribution-grids-1130Influence of the cutting fluid on process energy demand and surface roughness in grinding - a technological, environmental and economic examination (2015)International journal of advanced manufacturing technology, 77, 2005-2017. Winter, M., Thiede, S. & Herrmann, C.https://doi.org/10.1007/s00170-014-6557-1Simulation of matrix-structured manufacturing systems (2015)Journal of manufacturing systems, 37(Part 1), 104-112. Schönemann, M., Herrmann, C., Greschke, P. & Thiede, S.https://doi.org/10.1016/j.jmsy.2015.09.002Umweltbezogene Oberkennzahl für komplexe Unternehmensstrukturen (2015)Zeitschrift für wirtschaftlichen Fabrikbetrieb = ZWF, 110(9), 527-531. Hell, K., Gundlach, F.-W., Thiede, S. & Herrmann, C.https://doi.org/10.3139/104.111337

Conference article

PhD Thesis - Research UT, graduation UT

Serviceability of passenger trains during acquisition projects (2015)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Parada Puig, J. E.https://doi.org/10.3990/1.9789036538671

2014

Article

Energieflusstransparenz fördert transdisziplinäre Planung (2014)Zeitschrift für wirtschaftlichen Fabrikbetrieb = ZWF, 109(9), 650-654. Posselt, G., Linzbach, J., Thiede, S., Bernas, M. & Herrmann, C.https://doi.org/10.3139/104.111196A holistic and rapid sustainability assessment tool for manufacturing SMEs (2014)CIRP annals : manufacturing technology, 63(1), 437-440. Chen, D., Thiede, S., Schudeleit, T. & Herrmann, C.https://doi.org/10.1016/j.cirp.2014.03.113Extending energy value stream models by the TBS dimension - Applied on a multi product process chain in the railway industry (2014)Procedia CIRP, 15, 80-85. Posselt, G., Fischer, J., Heinemann, T., Thiede, S., Alvandi, S., Weinert, N., Kara, S. & Herrmann, C.https://doi.org/10.1016/j.procir.2014.06.067Sustainability in manufacturing and factories of the future (2014)International Journal of Precision Engineering and Manufacturing - Green Technology, 1, 283-292. Herrmann, C., Schmidt, C., Kurle, D., Blume, S. & Thiede, S.https://doi.org/10.1007/s40684-014-0034-z

Conference article

Hierarchical evaluation of environmental impacts from manufacturing system and machine perspective (2014)Procedia CIRP, 15, 141-146. Heinemann, T., Schraml, P., Thiede, S., Eisele, C., Herrmann, C. & Abele, E.https://doi.org/10.1016/j.procir.2014.06.063Integrating product characteristics into extended value stream modeling (2014)Procedia CIRP, 17, 368-373. Schönemann, M., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.procir.2014.01.091Matrix structures for high volumes and flexibility in production systems (2014)Procedia CIRP, 17, 160-165. Greschke, P., Schönemann, M., Thiede, S. & Herrmann, C.https://doi.org/10.1016/j.procir.2014.02.040

Conference contribution

Design Support Tool for Biomethane Supply Chains and Gas Distribution Grids (2014)In International Gas Union Research Conference (IGRC 2014): Gas Innovations Inspiring Clean Energy, Copenhagen, Denmark, 17–19 September 2014 (pp. 2534-2543). Curran Associates Inc.. Weidenaar, T., Becker, J., Hoekstra, S. & Wolters, M.Supporting industrial equipment development through a set of design-for-maintenance guidelines (2014)In DS 77: Proceedings of the DESIGN 2014 13th International Design Conference (pp. 323-332). Mulder, W., Basten, R. J. I., Jauregui Becker, J. M., Blok, J., Hoekstra, S. & Kokkeler, F. G. M.https://www.designsociety.org/publication/35177/SUPPORTING+INDUSTRIAL+EQUIPMENT+DEVELOPMENT+THROUGH+A+SET+OF+DESIGN-FOR-MAINTENANCE+GUIDELINESLife Cycle Evaluation of Factories: The Case of a Car Body Welding Line with Pneumatic Actuators (2014)In Advances in Production Management Systems: Innovative and Knowledge-Based Production Management in a Global-Local World - IFIP WG 5.7 International Conference, APMS 2014, Proceedings (pp. 546-554) (IFIP Advances in Information and Communication Technology; Vol. 440). Springer. Heinemann, T., Kaluza, A., Thiede, S., Ditterich, D., Linzbach, J. & Herrmann, C.https://doi.org/10.1007/978-3-662-44733-8_68

PhD Thesis - Research UT, graduation UT

Designing the biomethane supply chain through automated synthesis (2014)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Weidenaar, T. D.https://doi.org/10.3990/1.9789036536127

2013

Article

An implemented framework to estimate manufacturing-related energy consumption in product design (2013)International journal of computer integrated manufacturing, 26(9), 866-880. Bonvoisin, J., Thiede, S., Brissaud, D. & Herrmann, C.https://doi.org/10.1080/0951192X.2013.799782Environmental aspects in manufacturing system modelling and simulation-State of the art and research perspectives (2013)CIRP journal of manufacturing science and technology, 6(1), 78-87. Thiede, S., Seow, Y., Andersson, J. & Johansson, B.https://doi.org/10.1016/j.cirpj.2012.10.004SME appropriate concept for continuously improving the energy and resource efficiency in manufacturing companies (2013)CIRP journal of manufacturing science and technology, 6(3), 204-211. Thiede, S., Posselt, G. & Herrmann, C.https://doi.org/10.1016/j.cirpj.2013.02.006

Book editing

Energie- und hilfsstoffoptimierte Produktion (2013)[Book/Report › Book editing]. Springer. Herrmann, C., Posselt, G. & Thiede, S.https://doi.org/10.1007/978-3-642-38692-3

Chapter

Handlungsfeld Bewertung von Energie-und Ressourceneffizienz in industriellen Prozessketten (2013)In Energie-und ressourceneffiziente Produktion von Aluminiumdruckguss (pp. 277-320). Springer. Heinemann, T., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-642-39853-7_11

Conference article

A state-of-the-art review and evaluation of tools for factory sustainability assessment (2013)Procedia CIRP, 9, 85-90. Chen, D., Schudeleit, T., Posselt, G. & Thiede, S.https://doi.org/10.1016/j.procir.2013.06.173

Conference contribution

Modelling the Pressure Profile for Optical Cables in Ducts (2013)In Proceedings of the 62nd International Wire & Cable Symposium (IWCS 2013). Snippe, A., Bresser, O. R., Hoekstra, S. & Griffioen, W.Finding robust investments for the Dutch gas distribution infrastructure in 2050 by a scenario study (2013)In Proceedings 26th international conference on efficiency, cost, optimization, simulation and environmental impact of energy systems (pp. -). Weidenaar, T., Bekkering, E., Jauregui Becker, J. M., Hoekstra, S. & Wolters, M.An empirical study of commonality in rolling stock maintenance operations (2013)In Operations Management at the heart of the recovery (pp. 86-86). UCD and TCD Schools of Business. Parada Puig, J. E., Hoekstra, S. & van Dongen, L. A. M.An extended energy value stream approach applied on the electronics industry (2013)In Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services: IFIP WG 5.7 International Conference, APMS 2012, Rhodes, Greece, September 24-26, 2012, Revised Selected Papers, Part I (IFIP Advances in Information and Communication Technology; Vol. 397). Springer. Bogdanski, G., Schönemann, M., Thiede, S., Andrew, S. & Herrmann, C.https://doi.org/10.1007/978-3-642-40352-1_9Combined energy, material and building simulation for green factory planning (2013)In Re-Engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013 (pp. 493-498). Springer. Stahl, B., Taisch, M., Cannata, A., Müller, F., Thiede, S., Herrmann, C., Cataldo, A. & Antonio, F. C.https://doi.org/10.1007/978-981-4451-48-2_80Combining machine tool builder and operator perspective towards energy and resource efficiency in manufacturing (2013)In Re-Engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013 (pp. 209-214). Springer. Posselt, G., Kellens, K., Thiede, S., Renaldi, Herrmann, C., Dewulf, W. & Duflou, J. R.https://doi.org/10.1007/978-981-4451-48-2_34Green Factory Planning: Framework and Modules for a Flexible Approach (2013)In Advances in Production Management Systems: Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings (pp. 167-174) (IFIP Advances in Information and Communication Technology; Vol. 414). Springer. Mueller, F., Cannata, A., Stahl, B., Taisch, M., Thiede, S. & Herrmann, C.Impact of process selection on material and energy flow (2013)In Re-Engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013 (pp. 159-163). Springer. Ibbotson, S., Kara, S., Herrmann, C. & Thiede, S.https://doi.org/10.1007/978-981-4451-48-2_26Life-cycle oriented decision support for the planning of fleets with alternative powertrain vehicles (2013)In Re-Engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013 (pp. 75-80). Springer. Mennenga, M., Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-981-4451-48-2_12

2012

Book

Design for maintenance: guidelines to enhance maintainability, reliability and supportability of industrial products (2012)[Book/Report › Book]. University of Twente. Mulder, W., Blok, J., Hoekstra, S. & Kokkeler, F.Energy Efficiency in Manufacturing Systems (2012)[Book/Report › Book]. Springer. Thiede, S.https://doi.org/10.1007/978-3-642-25914-2

Conference article

A systematic method for increasing the energy and resource efficiency in manufacturing companies (2012)Procedia CIRP, 2(1), 28-33. Thiede, S., Bogdanski, G. & Herrmann, C.https://doi.org/10.1016/j.procir.2012.05.034

Conference contribution

Exploiting Life Cycle Innovation (2012)In Leveraging Technology for a Sustainable World: Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23-25, 2012 (pp. 31-36). Springer. Parada Puig, J. E., Hoekstra, S. & van Dongen, L. A. M.https://doi.org/10.1007/978-3-642-29069-5_6A forecasting model for the evaluation of future resource availability (2012)In Leveraging Technology for a Sustainable World: Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23 - 25, 2012 (pp. 449-454). Springer. Mennenga, M., Thiede, S., Beier, J., Dettmer, T., Kara, S. & Herrmann, C.https://doi.org/10.1007/978-3-642-29069-5_76A hierarchical evaluation scheme for industrial process chains: Aluminum die casting (2012)In Leveraging Technology for a Sustainable World: Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23 - 25, 2012 (pp. 503-508). Springer. Heinemann, T., Machida, W., Thiede, S., Herrmann, C. & Kara, S.https://doi.org/10.1007/978-3-642-29069-5_85A material and energy flow oriented method for enhancing energy and resource efficiency in aluminium foundries (2012)In Leveraging Technology for a Sustainable World: Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23-25, 2012 (pp. 281-286). Springer. Krause, M., Thiede, S., Herrmann, C. & Butz, F. F.https://doi.org/10.1007/978-3-642-29069-5_48Dynamic Total Cost of Ownership (TCO) calculation of injection moulding machines (2012)In Leveraging Technology for a Sustainable World: Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23 - 25, 2012 (pp. 275-280). Springer. Thiede, S., Spiering, T., Kohlitz, S., Herrmann, C. & Kara, S.https://doi.org/10.1007/978-3-642-29069-5_47

2011

Article

Dynamic life cycle costing based on lifetime prediction (2011)International Journal of Sustainable Engineering, 4(3), 224-235. Herrmann, C., Kara, S. & Thiede, S.https://doi.org/10.1080/19397038.2010.549245Energy oriented simulation of manufacturing systems - Concept and application (2011)CIRP annals : manufacturing technology, 60(1), 45-48. Herrmann, C., Thiede, S., Kara, S. & Hesselbach, J.https://doi.org/10.1016/j.cirp.2011.03.127Procedures and tools for metering energy consumption of machine tools (2011)Zeszyty Naukowe Politechniki Poznaskiej. Budowa Maszyn i Zarzadzanie Produkcja(15), 87-102. Herrmann, C., Zein, A., Winter, M. & Thiede, S.

Chapter

A holistic framework for increasing energy and resource efficiency in manufacturing (2011)In Advances in Sustainable Manufacturing: Proceedings of the 8th Global Conference on Sustainable Manufacturing (pp. 267-273). Springer. Herrmann, C., Thiede, S. & Heinemann, T.https://doi.org/10.1007/978-3-642-20183-7

Conference contribution

Supportability and purchasing decisions for capital assets: positioning paper (2011)In IET and IAM Asset Management Conference 2011 (pp. 1-6). IEEE. Parada Puig, J. E., Hoekstra, S., Huisman, B. H. & van Dongen, L. A. M.https://doi.org/10.1049/cp.2011.0566Dutch gas distribution grid goes green: decision support tool for local biogas utilization (2011)In International Gas Union Research Conference 2011: Proceedings of a meeting held 19-21 October 2011, Seoul, Korea (pp. 975-996). Curran Associates Inc.. Weidenaar, T. D., Hoekstra, S. & Wolters, M.State of research and an innovative approach for simulating energy flows of manufacturing systems (2011)In Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011 (pp. 335-340). Springer. Thiede, S., Herrmann, C. & Kara, S.https://doi.org/10.1007/978-3-642-19692-8_58Synergies from process and energy oriented process chain simulation - A case study from the aluminium die casting industry (2011)In Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011 (pp. 317-322). Springer. Herrmann, C., Heinemann, T. & Thiede, S.https://doi.org/10.1007/978-3-642-19692-8_55Development options for the Dutch gas distribution grid in a changing gas market (2011)In Proceedings of the 2011 IEEE International Conference on Networking, Sensing and Control (pp. -). IEEE. Weidenaar, T., Hoekstra, S. & Wolters, M.Energy flow simulation for manufacturing systems (2011)In Advances in Sustainable Manufacturing (pp. 275-280). Springer. Thiede, S. & Herrmann, C.https://doi.org/10.1007/978-3-642-20183-7_39Sustainability in Production Engineering - Holistic Thinking in Education - (2011)In Advances in Sustainable Manufacturing (pp. 25-30). Springer. Herrmann, C., Bogdanski, G., Winter, M., Heinemann, T., Thiede, S. & Zein, A.https://doi.org/10.1007/978-3-642-20183-7_4

2010

Conference contribution

Energy efficiency in manufacturing: perspectives from Australia and Europe (2010)In Conference proceedings - LCE 2010: 17th CIRP International Conference on Life Cycle Engineering (pp. 23-28). Hefei University of Technology Press. Herrmann, C., Kara, S., Thiede, S. & Luger, T.Simulation-based energy flow evaluation for sustainable manufacturing systems (2010)In Conference proceedings - LCE 2010: 17th CIRP International Conference on Life Cycle Engineering (pp. 99-104). Hefei University of Technology Press. Thiede, S. & Herrmann, C.

2009

Article

Methodology for the design of sustainable production systems (2009)International Journal of Sustainable Manufacturing, 1(4). Herrmann, C., Bergmann, L. & Thiede, S.https://doi.org/10.1504/IJSM.2009.031360Process chain simulation to foster energy efficiency in manufacturing (2009)CIRP journal of manufacturing science and technology, 1(4), 221-229. Herrmann, C. & Thiede, S.https://doi.org/10.1016/j.cirpj.2009.06.005

Conference contribution

Automotive life cycle engineering (2009)In Proceedings of the 16th CIRP International Conference on Life Cycle Engineering, Cairo 2009 (pp. 157-164). Herrmann, C., Thiede, S., Luger, T., Zein, A., Stehr, J., Halubek, P. & Torney, M.Energy efficiency of machine tools: extending the perspective (2009)In Proceedings of the 42nd CIRP International Conference on Manufacturing Systems: June 3-5, 2009 Grenoble, France, 2009. Technical University of Braunschweig. Herrmann, C., Thiede, S., Zein, A., Ihlenfeldt, S. & Blau, P.Towards Energy and Resource Efficient Process Chains (2009)In Proceedings of the 16th CIRP International Conference on Life Cycle Engineering, Cairo 2009 (pp. 303–309). Herrmann, C. & Thiede, S.

Report

Industriële behoeftepeiling maintenance 2009-2014: Technologie, onderzoek en kennismobilisatie (2009)[Book/Report › Report]. University of Twente. Blok, J., Hoekstra, S., van Houten, F. J. A. M. & Kokkeler, F.

2008

Chapter

An environmental perspective on Lean production (2008)In Manufacturing Systems and Technologies for the New Frontier: The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan (pp. 83-88). Springer. Herrmann, C., Thiede, S., Stehr, J. & Bergmann, L.https://doi.org/10.1007/978-1-84800-267-8_16Lean production system design from the perspective of the Viable System Model (2008)In Manufacturing Systems and Technologies for the New Frontier: The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan (pp. 309-314). Springer. Herrmann, C., Bergmann, L., Halubek, P. & Thiede, S.https://doi.org/10.1007/978-1-84800-267-8_63

Conference contribution

Bringing sustainable manufacturing into practice--the machine tool case (2008)In Sustainable Manufacturing VI: Global Conference on Sustainable Product Development and Life Cycle Engineering, Pusan, Korea, 2008 (pp. 272-277). Technische Universitat Braunschweig. Herrmann, C., Zein, A., Thiede, S., Bergmann, L. & Bock, R.Energieeffizienz durch optimierte Abstimmung zwischen Produktion und technischer Gebäudeausrüstung (2008)In Advances in Simulation for Production and Logistics Applications (pp. 177-185) (ASIM-Mitteilungen aus den Arbeitskreisen). Fraunhofer IRB Verlag. Martin, L., Hesselbach, J., Thiede, S., Herrmann, C., Lüdemann, B. & Detzer, R.http://www.asim-fachtagung-spl.de/asim2008/papers/Proof_124-3b.pdfEnergy efficiency through optimised coordination of production and technical building services (2008)In LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings. Article 109. CIRP. Hesselbach, J., Herrmann, C., Detzer, R., Martin, L., Thiede, S. & Ludemann, B.https://search.informit.com.au/documentSummary;dn=563827431296163;res=IELENGIncreasing energy efficiency in manufacturing companies through process chain simulation (2008)In Sustainable Manufacturing VI: Global Conference on Sustainable Product Development and Life Cycle Engineering, Pusan, Korea, 2008 (pp. 52-57). Technische Universitat Braunschweig. Herrmann, C. & Thiede, S.Life Cycle Engineering: State of the Art and Research Perspectives (2008)In LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings (pp. 449-454). CIRP. Herrmann, C., Bergmann, L., Halubek, P., Stehr, J. & Thiede, S.https://search.informit.com.au/documentSummary;dn=562802617876962;res=IELENG

2007

Article

Gestaltungselemente und Erfolgsfaktoren-Ergebnisse einer empirischen Umfrage unter produzierenden Unternehmen (2007)Intelligenter Produzieren(3), 20-22. Herrmann, C., Bergmann, L. & Thiede, S.

Conference contribution

Developing life cycle oriented innovations within the turbulent business environment (2007)In Proceedings of ICED 2007, the 16th International Conference on Engineering Design (International Conference on Engineering Design (ICED); Vol. DS 42). The Design Society. Herrmann, C., Bergmann, L. & Thiede, S.https://www.designsociety.org/publication/25535/Developing+Life+Cycle+Oriented+Innovations+within+the+Turbulent+Business+EnvironmentFramework for integrated analysis of production systems (2007)In Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th–13th, 2007 (pp. 195-200). Springer. Herrmann, C., Bergmann, L., Thiede, S. & Zein, A.https://doi.org/10.1007/978-1-84628-935-4_34Life Cycle Innovations in extended supply chain networks (2007)In Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th–13th, 2007 (pp. 439-444). Springer. Herrmann, C., Bergmann, L., Thiede, S. & Zein, A.https://doi.org/10.1007/978-1-84628-935-4_76Energy labels for production machines: an approach to facilitate energy efficiency in production systems (2007)In Proceedings of 40th CIRP International Seminar on Manufacturing Systems . CIRP. Herrmann, C., Bergmann, L., Thiede, S. & Zein, A.Total life cycle management-an integrated approach towards sustainability (2007)In 3rd International Conference on Life Cycle Management, Zurich. Herrmann, C., Bergmann, L., Thiede, S. & Halubek, P.

2004

Conference contribution

High-performance orderpicking concept around the logistacher AS/RS (2004)In Progress in Material Handling Research 2004: [invited papers submitted for presentation and discussion at the 8th International Material Handling Research Colloquium (IMHRC) held in Graz, Austria and Wels, Austria from 13 June to 17 June 2004 (pp. 245-254). The Material Handling Institute. Mantel, R., Hoekstra, S., Leerintveld, P. A. L. & Looy, D.

2002

Conference contribution

Using a digital learning environment in manufacturing (2002)In CIRP International Manufacturing Education Conference; CIMEC-2002 (cimec 2002) (pp. 255-264). University of Twente. Gommer, E. M. & Hoekstra, S.

1990

PhD Thesis - Research UT, graduation UT

Design, modelvalidation and optimization of positioning devices (1990)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Hoekstra, S.