In typical hardware development, electronic components get connected through the use of heating and soldering, with metals such as tin. At SIL-EE we over various tools that can aid with heating and soldering electronic components
Hot Air Soldering (JTSE-A)
A hot air soldering station uses a focused stream of heated air to solder or desolder surface-mount components. Instead of touching a hot metal tip to each pin, you aim hot air at the component, melting all the solder joints around it at once. This makes it the standard tool for working with parts that a regular soldering iron can't easily handle: chips with dozens of pins, components hidden under shields, or BGA packages where the pins are underneath the chip. You control the air temperature, flow rate, and nozzle size to suit the component and the task.
SIL-EE has a JBC JTSE-A, a precision hot air station with adjustable temperatures from 150–450 °C and airflow up to 50 SLPM. It includes a Type-K thermocouple for direct PCB temperature monitoring, a range of nozzles for different component sizes, and a suction pen for placing and removing small SMD parts. The JTSE-A pairs naturally with the DME soldering station: use the DME for everyday hand soldering, and the JTSE-A when you need to install or remove multi-pin SMD components, BGAs, or anything an iron can't reach.
How To use it?
Multi Tool Soldering (JBC DME-2A)
A multi-tool soldering station is a control unit that powers several soldering and rework tools at once from a single base. Instead of having separate stations for soldering, desoldering, and SMD tweezers, you connect multiple handpieces to one control unit, each with its own temperature setting, ready to grab whenever you need it. This makes it the standard professional setup for electronics rework benches where users move between tasks quickly without waiting for tools to heat up or change settings.
SIL-EE has a JBC DME-A (specifically 2A due to 230V), a control unit that supports up to four tools simultaneously. The typical configuration includes a soldering iron, a desoldering iron with built-in vacuum, hot tweezers for removing two-pin SMD components, and a precision soldering handpiece. Each tool keeps its own temperature in memory, and the station automatically detects which tool is being used. The DME-A pairs naturally with the JTSE-A hot air station: use the DME-A for everyday hand soldering, desoldering, and small SMD work, and switch to the JTSE-A when you need to rework multi-pin chips or BGAs that an iron can't handle.
How To use it?
Reflow oven
A reflow oven heats a circuit board through a controlled temperature profile to melt solder paste and form proper solder joints between surface-mount components and the board. The board is loaded with paste and components beforehand; the oven gradually preheats it, holds it at a soak temperature, briefly peaks above the solder's melting point (~240 °C for lead-free), then cools it down, all following a precise curve so components attach reliably without thermal damage.
SIL-EE has a eC Reflow Mate V4, a compact benchtop oven with programmable temperature profiles suitable for both lead-free (SAC305) and leaded solder pastes. It pairs naturally with the BotFactory SV2: the SV2 handles printing, paste dispensing, and component placement, while the Reflow Mate M4 performs the final reflow step with a more accurate thermal curve than the SV2's on-board heated bed can provide.