See Stefan Schlautmann

Publication list Stefan Schlautmann

“Designing, simulation and realization of in-plane operating micro valves, using new etching techniques”, R.E. Oosterbroek, J.W. Berenschot, S. Schlautmann, G.J.M. Krijnen, T.S.J. Lammerink, M.C. Elwenspoek and A. van den Berg, Journal of Micromechanics and Microengineering 9 No 2, 194-198 (June 1999)

“Field Effect Flow Control for Microfabricated Fluidic Networks”, R.B.M. Schasfoort, S. Schlautmann, J. Hendrikse, A. van den Berg, Science 286, No 5441, 942 - 945 (Issue of 29 Oct 1999),

“Selective Fusion Bonding by Surface Roughness Control”, C. Gui, R.E. Oosterbroek, J.W. Berenschot, S. Schlautmann, T.S.J. Lammerink, A. Van den Berg, M.C. Elwenspoek; Journal of The Electrochemical Society 148, (2001) G225-G228

”New approaches for fabrication of microfluidic capillary electrophoresis devices with on-chip conductivity detection”, Rosanne M. Guijt, Erik Baltussen, Gert van der Steen, Richard B.M. Schasfoort, Stefan Schlautmann, Hugo A.H. Billiet, Johannes Frank, Thomas G.M. Schalkhammer, Gijs W.K. van Dedem and Albert van den Berg; Journal of Electrophoresis (2001), 22, 235-241

“Powder-Blasting Technology as an Alternative Tool for Micro-Fabrication of CE-Chips with Integrated Conductivity Sensors”, S. Schlautmann, H. Wensink, R.B.M. Schasfoort, M.C. Elwenspoek, A.van den Berg; Journal of Micromechanics and Microengineering 11 No 4, 386-389 (July 2001)

“Fine Tuning the Roughness of Powder Blasted Surfaces”, H. Wensink, S. Schlautmann, M.H. Goedbloed, M.C. Elwenspoek; Journal of Micromechanics and Microengineering 12 No 5, 616-620 (September 2002)

“Fabrication of a microfluidic chip by UV bonding at room temperature for integration of temperature sensitive layers”, S. Schlautmann, G.A.J. Besselink, Radhakrishna Prabhu G., R.B.M. Schasfoort, Journal of Micromechanics and Microengineering 13 No 4 (July 2003)

“Recirculation of Nanoliter Volumes within Microfluidic Channels”, R.G.H. Lammertink, S. Schlautmann, G.A.J. Besselink, R.B.M. Schasfoort, Analytical Chemistry, Vol. 76, No 11, (June 1, 2004)

“Electroosmotic guiding of sample flows in a laminar flow chamber”, G.A.J. Besselink, P. Vulto, R.G.H. Lammertink, S. Schlautmann, A. van den Berg, W. Olthuis, G. Engbers, R.B.M. Schasfoort; Journal of Electrophoresis 25, 3705-3711 (2004)

“Electroosmotically controllable multi-flow microreactor”; D. Kohlheyer, G.A.J. Besselink, R.G.H. Lammertink, S. Schlautmann, S. Unnikrishnan, R.B.M. Schasfoort; Microfluidics and Nanofluidics 1, 242-248 (2005)

“Free-flow zone electrophoresis and isoelectric focusing using a microfabricated glass device with photo-polymerized membranes”; D. Kohlheyer, G.A.J. Besselink, S. Schlautmann, R.B.M. Schasfoort; Lab on a Chip, Vol. 6 No 3, 374-380 (2006)

“Microfluidic high-resolution free-flow isoelectric focusing”; D. Kohlheyer, J. C. T. Eijkel, S. Schlautmann, A. van den Berg, R.B.M. Schasfoort; Analytical Chemistry, Vol. 79, No. 21, 8190-8 (November 1, 2007)