Skip to main content
Menu
en
Nederlands
English
MS3 Department
UT
Faculties
ET
Departments
MS3
Facilities: MechLab
Mechanical Characterization
Stress and Deformation
en
Nederlands
English
MS3 Department
UT
Faculties
ET
Departments
MS3
Facilities: MechLab
Mechanical Characterization
Stress and Deformation
Stress and Deformation
Aramis
ARAMIS is an Optical Deformation and Strain Measurement System, which is an optical technique used to measure the deformation and strain of the surface of an object before and after loading. ARAMIS recognizes the surface structure of the measuring object in digital camera images and allocates coordinates to the image pixels. To enhance the image analysis, a random speckle pattern is applied using a spray paint.
Biaxial tester
The Biaxial tester loads a sheet metal specimen on arbitrary tension and/or simple shear deformation. With this equipment the hardening behaviour of metal can be investigated under multiaxial loading conditions.
Internal mixer
Brabender® 350S measuring mixers are interchangeable measuring heads which, in connection with a Plasti-Corder® Lab-Station, serve for testing the processibility of thermoplastics, thermosets,
MessPhysick Laser Speckle Extesometer
Non-contact extension measuring system
Mooney Viscometer
The Mooney viscometer 2000 has been used especially in the rubber industry for more than 50 years. The MV 2000 from Alpha technoligies builds for Mooney viscosity measurement.
Oscillating Disc Rheometer
The Monsanto Rheometer 100S describe the curing and processing characteristics of vulcanizable elastomers. A sample sealed in a temperature controlled die cavity surrounds a rotor that oscillates at a frequency of 1.67 Hz (100 cpm).
Rubber process analyser
The Rubber Process Analyzer (RPA) is an advanced (dynamic mechanical rheological) test instrument, designed to measure the viscoelastic properties of polymers and rubber compounds before, during and after cure.
Tensile tester
Equipment is used for studying the stress-strain behaviour of materials like rubber and other polymers. Maximum work load in this equipment is 1 kN.
Two-roll mill
Schwabenthan Two-roll milling is a relatively simple method for compounding additives into elastomeric (rubber) and certain thermoplastic materials, and for forming the resulting material into a thin sheet for subsequent moulding or testing.
Vulcanization Press
The Wickert Press WLP 1600 is designed for the vulcanization of rubber parts or silicon rubber parts in laboratories.
Close
Suggestions
