Arun, A., Baack, K.K.J. & Gaymans, R.J. (2010) Polyurethane Tri-block Copolymers-Synthesis, Mechanical, Elastic, and Rheological Properties. Polymer Engineering and Science, 50(4), 747-755. DOI
Arun, A., Dullaert, K. & Gaymans, R.J. (2010) The Melt Rheological Behavior of AB, ABA, BAB, and (AB)(n) Block Copolymers With Monodisperse Aramide Segments. Polymer Engineering and Science, 50(4), 756-761. DOI
Basalus, M.W. Z., van Houwelingen, K.G., Ankone, M.J. K., Feijen, J. & von Birgelen, C. (2010) Micro-computed tomographic assessment following extremely oversized partial postdilatation of drug-eluting stents. EuroIntervention,6(1), 141-8.
Berg van den, J.H.; Oosterhuis, K., Hennink, W.E., Storm, G., van der Aa, L.J., Engbersen, J.F.J., Haanen, J.B.A.G., Beijnen, J.H., Schumacher, T.N. & Nuijen, B. (2010) Shielding the cationic charge of nanoparticle-formulated dermal DNA vaccines is essential for antigen expression and immunogenicity. Journal of Controlled Release, 141(2), 234-240. DOI
Biemond, G.J.E., & Gaymans, R.J. (2010) Elastic properties of thermoplastic elastomers based on poly(tetramethylene oxide) and monodisperse amide segments. Journal of Materials Science, 45(1), 158-167. DOI
Buwalda, S.J., Dijkstra, P.J., Calucci, L., Forte, C. & Feijen, J. (2010) Influence of Amide versus Ester Linkages on the Properties of Eight-Armed PEG-PLA Star Block Copolymer Hydrogels Biomacromolecules,11(1), 224-232. DOI
Habraken, W.J.E.M., Liao, H.B., Zhang, Z., Wolke, J.G.C., Grijpma, D.W., Mikos, A.G., Feijen, J. & Jansen, J.A. (2010) In vivo degradation of calcium phosphate cement incorporated into biodegradable microspheres. Acta Biomaterialia,6(6), 2200-2211. DOI
Jeong, J.H., Kim, S.H., Christensen, L.V., Feijen, J. & Kim, S.W. (2010) Reducible Poly(amido ethylenimine)-Based Gene Delivery System for Improved Nucleus Trafficking of Plasmid DNA. BioconjugateChemistry,21(2), 296-301. DOI
Jin, R., Teixeira, L.S.M., Krouwels, A., Dijkstra, P. J., van Blitterswijk, C. A., Karperien, M. & Feijen, J. (2010) Synthesis and characterization of hyaluronic acid-poly(ethylene glycol) hydrogels via Michael addition: An injectable biomaterial for cartilage repair. ACTA BIOMATERIALIA,6(6), 1968-1977. DOI
Jin, R; Teixeira, L.S.M., Dijkstra, P.J., van Blitterswijk, C.A., Karperien, M., Feijen, J. (2010) Enzymatically-crosslinked injectable hydrogels based on biomimetic dextran-hyaluronic acid conjugates for cartilage tissue engineering. BIOMATERIALS,31(11), 3103-3113. DOI
Jukes, J.M., van der Aa, L.J., Hiemstra, C., van Veen, T., Dijkstra, P.J., Zhong, Z., Feijen, J., van Blitterswijk, C.A. & de Boer, J. (2010) A Newly Developed Chemically Crosslinked Dextran-Poly(Ethylene Glycol) Hydrogel for Cartilage Tissue Engineering. Tissue Engineering Part A, 16(2), 565-573. DOI
Meer van der, A.D., Poot, A.A., Feijen, J. & Vermes, I. (2010) Analyzing shear stress-induced alignment of actin filaments in endothelial cells with a microfluidic assay. BIOMICROFLUIDICS, 4(1). DOI
Meer van der, A.D., Vermeul, K., Poot, A.A., Feijen, J. & Vermes, I. (2010) A microfluidic wound-healing assay for quantifying endothelial cell migration. American Journal of Physiology-Heart and Circulatory Physiology, 298(2), H719-H725. DOI
Melchels, F.P.W., Feijen, J. & Grijpma, D.W. (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials, 31(24),6121-30.
Namgung, R., Brumbach, J.H., Jeong, J.H., Yockman, J.W., Kim, S.W., Lin, C., Zhong, Z., Feijen, J., Engbersen, J.F.J. & Kim, W.J. (2010) Dual bio-responsive gene delivery via reducible poly(amido amine) and survivin-inducible plasmid DNA. Biotechnology Letters, 32(6), 755-764.
Papenburg, B.J., Bolhuis-Versteeg, L.A.M., Grijpma, D.W, Feijen, J., Wessling, M. & Stamatialis, D. (2010) A facile method to fabricate poly(L-lactide) nano-fibrous morphologies by phase inversion. Acta Biomater, 6(7), 2477-83.
Song, Y., Kamphuis, M.M.J., Zhang, Z., Sterk, L.M.Th., Vermes, I., Poot, A.A., Feijen, J. & Grijpma, D.W. (2010) Flexible and elastic porous poly(trimethylene carbonate) structures for use in vascular tissue engineering. Acta Biomaterialia,6(4), 1269-1277. DOI
IJzer, A.C., Arun, A., Reijerkerk, S.R., Nijmeijer, K., Wessling, M. & Gaymans, R.J. (2010) Synthesis and Properties of Hydrophilic Segmented Block Copolymers Based on Poly(ethylene oxide)-ran-poly(propylene oxide). Journal of Applied Polymer Science, 117(3), 1394-1404. DOI
2009
Araichimani, A. & Gaymans, R.J. (2009). Hydrophilic poly(ethylene oxide)-aramide segmented block copolymers. European polymer journal, 45(10), 2858-2866. DOI
Araichimani, A. & Gaymans, R.J. (2009). Melt rheological behavior of a triblock copolymer based on aramide end-segments. Journal of applied polymer science, 112(5), 2663-2668. DOI
Araichimani, A., Dullaert, K. & Gaymans, R.J. (2009). Structure and properties of mono-, di-, tri-, and multiblock segmented copolymers with diamide hard segments. Macromolecular chemistry and physics, 210(1), 48-59. DOI
Araichimani, A. & Gaymans, R.J. (2009). Tensile and elastic properties of triblock copolymer based on aramide end-segments and polyether mid-segments. Journal of applied polymer science, 111, 1780-1785. DOI
Araichimani, A. & Gaymans, R.J. (2009). Thermoplastic polyurethanes with TDI-based monodisperse hard segments. Macromolecular materials and engineering, 294(6-7), 405-413. DOI
Basalus, M.Z., Ankone, M.J.K., Houwelingen, K.G. van , Man, F.H. de & Birgelen, C. von (2009). Coating irregularities of durable polymer-based drug-eluting stents as assessed by scanning electron microscopy. EuroIntervention, 5(1), 157-165.
Basalus, M.Z., Houwelingen, K.G. van, Ankone, M.J.K. , Man, F.H. de & Birgelen, C. von (2009). Scanning electron microscopic assessment of the biodegradable coating on expanded biolimus-eluting stents. EuroIntervention, 5(4), 505-510.
Bat, E., Kooten, T.G., Feijen, J. & Grijpma, D.W. (2009). Macrophage-mediated erosion of gamma irradiated poly(trimethylene carbonate films. Biomaterials, 30(22), 3652-3661. DOI
Biemond, G.J.E., Feijen, J. & Gaymans, R.J. (2009). Segmented block copolymers with monodisperse hard segments: the influence of H-bonding on various properties. Macromolecular materials and engineering, 294(8), 492-501. DOI
Bladergroen, B., Siebum, B., Siebers-Vermeulen, K.G.C., Kuppevelt, T.H. van, Poot, A.A., Feijen, J., Figdor, C.G. & Torensma, R. (2009). In vivo recruitment of hematopoietic cells using stromal cell-derived factor 1 alpha-loaded heparinized three dimensional collagen scaffolds. Tissue Engineering Part A, 15(7), 1591-1599. DOI
Du, H(ongzhi) , Velders, A.H. , Dijkstra, P.J. , Sun, J.R. , Zhong, Z. , Chen, X. & Feijen, J. (2009). Chiral salan aluminium ethyl complexes and their application in lactide polymerization. Chemistry: a European journal, 15(38), 9836-9845. DOI
Du, H(ongzhi), Velders, A.H., Dijkstra, P.J., Zhong, Z., Chen, X. & Feijen, J. (2009). Polymerization of lactide using achiral bis(pyrrolidene) schiff base aluminium complexes. Macromolecules, 42(4), 1058-1066. DOI
Feijen, J.(2009). In memory of Jorge Heller Obituary. Journal of controlled release, 139(3), 173. DOI
Hou, Q., Grijpma, D.W. & Feijen, J. (2009). Creep-resistant elastomeric networks prepared by photo-crosslinking fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers. Acta biomaterialia, 5, 1543-1551. DOI
Husken, D., Feijen, J. & Gaymans, R.J. (2009). Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments. Journal of applied polymer science, 114(2), 1264-1269. DOI
Husken, D. & Gaymans, R.J. (2009). The tensile properties of poly(ethylene oxide)-based segmented block copolymers in the dry and wet state. Journal of materials science, 44, 2656-2664. DOI
Husken, D. & Gaymans, R.J. (2009). Water vapor transmission of poly(ethylene oxide)-based segmented block copolymers. Journal of applied polymer science, 112, 2143-2150. DOI
Jansen, J., Melchels, F.P.W., Grijpma, D.W. & Feijen, J. (2009). Fumaric acid monoethyel ester-functionalized poly(D-Llactide/N-vinyl-2-pyrrolidone resins for the preparation of tissue engineering scaffolds by stereolithography. Biomacromolecules, 10(2), 214-210. DOI
Jin, R., Moreira Teixeira, L.S., Dijkstra, P.J., Karperien, H.B.J., Blitterswijk, C.A. van, Zhong, Z.Y. & Feijen, J. (2009). Injectable chitosan-based hydrogels for cartilage tissue engineering. Biomaterials, 30(13), 2544-2551 DOI
Koenders, M.M.J.F., Yang, Lanti, Wismans, R.G., Werf, K.O. van der , Reinhardt, D.P., Daamen, W.F., Bennink, M.L., Dijkstra, P.J., Kuppevelt, T.H. van & Feijen, J. (2009). Microscale mechanical properties of single elastic fibers: the role of fibrillin-microfibrils. Biomaterials, 30(13), 2425-2432. DOI
Lin, C. & Engbersen, J.F.J. (2009). The role of the disulfide group in disulfide-based polymeric gene carriers. Expert opinion on drug delivery, 6(4), 421-439. DOI
Meer, A.D. van der, Poot, A.A., Duits, M.H.G., Feijen, J. & Vermes, I. Microfluidic technology in vascular research. Journal of biomedicine and biotechnology, ID(823148). DOI
Meer, A.D. van der, Kamphuis, M.M.J., Poot, A.A. , Feijen, J. & Vermes, I. (2009). Lowering caveolin-1 expression in human vascular cells inhibits signal transduction in response to shear stress. International journal of cell biology
Meer, F.J. van der, Faber, D.J., Aalders, M.C., Poot, A.A., Vermes, I. & Leeuwen, A.G.J.M. van (2009). Apoptosis - and necrosis - induced changes in light attenuation measured by optical coherence tomography. Lasers in medical science, 25(2), 259-267. DOI
Melchels, F.P.W., Feijen, J. & Grijpma, D.W. (2009). A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. Biomaterials, 30, 3801-3809. DOI
Meng, F., Zhong, Z. & Feijen, J. (2009). Stimuli-responsive polymersomes for programmed drug delivery. Biomacromolecules, 10(2), 197-209. DOI
Neut, D.D., Kluin, O.S., Crielaard, B.J., Mei, H.C. van der, Busscher, H.J. & Grijpma, D.W. (Polymer (2009). A biodegradable antibiotic delivery system on poly(trimethylene carbonate) for the treatment of osteomyelitis. Acta Orthopaedica, 80(5), 514-519. DOI
Papenburg, B.J., Schüller-Ravoo, S., Bolhuis-Versteeg, L.A.M., Hartsuiker, L., Grijpma, D.W., Feijen, J., Wessling, M. & Stamatialis, D. (2009). Designing porosity and topography of poly(1,3-trimethylene carbonate) scaffolds. Acta biomaterialia, 5, 3281-3294. DOI
Papenburg, B.J., Boer, J. de, Grijpma, D.W., Feijen, J., Blitterswijk, C.A. van, Wessling, M. & Stamatialis, D. (2008). Novel membrane based scaffolds for tissue engineering. International journal of artificial organs, 32, 409-410.
Russell-Lodrigue, K.E., Andoh, M. , Poels, M.W.J., Shive, H.R., Weeks, B.R. , Zhang, G.Q., Tersteeg, C., Masegi, T., Hotta, A., Yamaguchi, T., Fukushi, H., Hirai, K., McMurray, D.N. & Samuel, J.E. (2009). Coxiella burnetii isolates cause genogroup-specific virulence in mouse and guinea pig models of acute Q fever. Infection and immunity, 77(12), 5640-5650. DOI
Stephen, R., Gibon, C.M., Weber, M. & Gaymans, R.J. (2009). Synthesis and properties of poly(sulfone-acrylate) copolymers. Journal of polymer science, part A, 47, 3904-3913. DOI
Subbiahdoss, G., Kuijer, R., Grijpma, D.W., Mei, H.C. van der & Busscher, H.J. (2009). Biofilm growth versus tissue integration: the race for the surface experimentally studied. Acta biomaterialia, 5, 1399-1404. DOI
Subbiahdoss, G., Kuijer, R., Grijpma, D.W., Mei, H.C. van der & Busscher, H.J. (2009). Microbial biofilm growth vs. tissue integration: "the race for the surface" experimentally studied. Acta biomaterialia, 5(5), 1399-1404. DOI
Tan, B.H., Nabuurs, T. , Feijen, J. & Grijpma, D.W. (2009). Redox-initiated PMMA emulsion polymerizations stabilized with block copolymers based on poly(ethylene oxide), e-caprolactone and linoleic acid. Journal of Polymer Science, Part A: Polymer Chemistry, 47, 4234-4244. DOI
Velthoen, I.W., Dijkstra, P.J. & Feijen, J. (2009). AB(2) functional polyesters via ring opening polymerization: synthesis and characterization. Macromolecular chemistry and physics, 210(8), 689-697. DOI
2008
Araichimani, A. & Gaymans, R.J. (2008). Tri-block copolymers with mono-disperse crystallizable diamide segments: synthesis, analysis and rheological properties. Polymer, 49(10), 2461-2470. DOI
Araichimani, A. & Gaymans, R.J. (2008). Segmented block copolymers with monodisperse aramide end-segments. Macromolecular chemistry and physics, 209(8), 854-863. DOI
Araichimani, A., Baack, K.K.J. & Gaymans, R.J. (2008). Polyurethaan triblock copolymers with mono-disperse hard segments. Influence of the hard segment length on thermal and thermomechanical properties. Polymer engineering and science, 48(6), 1222-1230. DOI
Bat, E., Zhang Zheng, Z.Z., Grijpma, D.W. & Feijen, J. (2008). Trimethylene carbonate and e-caprolactone based (co)polymer networks: mechanical properties and enzymatic degradation. Biomacromolecules, 9(11), 3208-3215. DOI
Bat, E., Grijpma, D.W. & Feijen, J. (2008). Thermoreversible gelation behaviour of PTMC-PEG-PTMC triblock copolymers. Journal of controlled release, 132, e37-e39. DOI
Biemond, G.J.E., Feijen, J. & Gaymans, R.J. (2008). Tensile properties of segmented block copolymers with monodisperse hard segments. Journal of materials science, 43(10), 3689-3696. DOI
Biemond, G.J.E., Braspenning, K. & Gaymans, R.J. (2008). Polyurethanes with monodisperse rigid segments based on a diamine-diamine chain extender. Journal of applied polymer science, 107(4), 2180-2189. DOI
Biemond, G.J.E., Feijen, J. & Gaymans, R.J. (2008). Influence of polydispersity of crystallizable segments on the properties of segmented block copolymers. Polymer engineering and science, 48(7), 1389-1400. DOI
Coué, G.M.J.P.C., Feijen, J. & Engbersen, J.F.J. (2008). Development of biodegradable poly(amidoamine)s for protein delivery. Journal of controlled release, 132, e2-e3. DOI
De, D. & Gaymans, R.J. (2008). Thermoplastic polyurethanes with poly(butylene terephthalate) as crystallizable hard phase. Macromolecular materials and engineering, 293(3), 228-234. DOI
De, D. & Gaymans, R.J. (2008). Polyurethanes with narrow- and polydisperse hard segment distributions. Macromolecular materials and engineering, 293(11), 887-894. DOI
Dijkink, R.J., Le Gac, S., Nijhuis, E.H.A., Berg, A. van den, Vermes, I., Poot, A.A. & Ohl, C.D. (2008). Controlled cavitation-cell interaction: trans-membrane transport and viability studies. Physics in medicine and biology, 53, 375-390. DOI
Habraken, W.J.E.M., Zhang Zheng, Z.Z., Wolke, J.G.C., Grijpma, D.W., Mikos, A.G., Jansen, J.A. & Feijen, J. (2008). Introduction of enzymatically degradable poly(trimethylene carbonate) microspheres into an injectable calcium phosphate cement. Biomaterials, 29, 2464-2476. DOI
Husken, D. & Gaymans, R.J. (2008). The structure of water in PEO-based segmented block copolymers and its effect on transition temperatures. Macromolecular chemistry and physics, 209(9), 967-979. DOI
Husken, D., Feijen, J. & Gaymans, R.J. (2008). Sythesis and properties of segmented block copolymers based on mixtures of poly(ethylene oxide) and poly(tetramethylene oxide) segments. European polymer journal, 44(1), 130-143. DOI
Husken, D., Feijen, J. & Gaymans, R.J. (2008). Segmented block copolymers with terephthalic-extended poly(ethylene oxide) segments. Macromolecular chemistry and physics, 209(5), 525-534. DOI
Jansen, G.H., Franke, H.R., Wolbers, F., Brinkhuis, M. & Vermes, I. (2008). Effects of fulvestrant alone or combined with different steroids in human breast cancer cells. Climacteric, 11(4), 315-321. DOI
Jin, R., Moreira Teixeira, L.S., Dijkstra, P.J., Karperien, H.B.J., Zhong, Z. & Feijen, J. (2008). Fast in-situ formation of dextran-tyramine hydrogels for in vitro chondrocyte culturing. Journal of controlled release, 132, e24-e26. DOI
Komen, J., Wolbers, F., Franke, H.R., Andersson, S.M.H., Vermes, I. & Berg, A. van den (2008). Viability analysis and apoptosis induction of breast cancer cells in a microfluidic device: effect of cytostatic drugs. Biomedical microdevices, 10(5), 727-737. DOI
Lee, J.S., Zhou, W., Zhang, D., Otto, C. & Feijen, J. (2008). Hydrosomes, novel thermosensitive gel-containing polymersomes. Journal of controlled release, 132, e28-e29. DOI
Leeuwen, S.M. van, Tan, B.H., Grijpma, D.W., Feijen, J. & Karst, U. (2008). Characterization of synthetic block copolymers by LC-MS. American laboratory, 40, 36.
Lin, C. & Engbersen, J.F.J. (2008). Effect of chemical functionalities in poly(amido amine)s for non-viral gene transfection. Journal of controlled release, 132, 267-272. DOI
Lin, C., Blaauboer, C., Mateos timoneda, M.A., Lok, M.C., Steenbergen, M. van, Hennink, W.E., Zhong, Z., Feijen, J. & Engbersen, J.F.J. (2008). Bioreducible poly(amido amine)s with oligoamine side chains: synthesis, characterization, and structural effects on gene delivery. Journal of controlled release, 126(2), 166-174. DOI
Lin, C., Zhong, Z., Lok, M.C., Wolf, H.K. de, Hennink, W.E., Feijen, J. & Engbersen, J.F.J. (2008). Bioreducible poly(amido amine)s for gene delivery to ovarian cancer cells. Journal of controlled release, 132, e9-e10. DOI
Martello, F., Engbersen, J.F.J. & Ferruti, P. (2008). Hyperbranched poly(amido amine)s for gene delivery to ovarian cancer cells. Journal of controlled release, 132, e10-e12. DOI
Mateos timoneda, M.A., Lok, M.C., Hennink, W.E., Feijen, J. & Engbersen, J.F.J. (2008). Poly(amido amine)s as gene delivery vectors: effects of quaternary nicotinamide moieties in the side chains. ChemMedChem, 3(3), 478-486. DOI
Meer, A.D. van der, Kamphuis, M.M.J., Poot, A.A., Feijen, J. & Vermes, I. (2008). A microfluidic device for monitoring siRNA delivery under fluid now. Journal of controlled release, 132, e42-e44. DOI
Melchels, F.P.W., Grijpma, D.W., Kellomaki, M. & Peltola, S.M. (2008). A review of rapid prototyping techniques for tissue engineering purposes. Annals of medicine, 40, 268-280. DOI
Melchels, F.P.W., Grijpma, D.W. & Feijen, J. (2008). Properties of porous structures prepared by stereolithography using a polylactide resin. Journal of controlled release, 132, e71-e73. DOI
Moreira Teixeira, L.S., Jin, R., Dijkstra, P.J., Feijen, J., Blitterswijk, C.A. van & Karperien, H.B.J. (2008). Chitosan-based hydrogels as extracellular matrix for cartilage tissue engineering: in vitro biological evaluation. Tissue Engineering Part A, 14, 711. DOI
Nalawade, S.P., Picchioni, F., Janssen, L.P.B.M., Grijpma, D.W. & Feijen, J. (2008). Investigation of the interaction of CO2 with poly(L-lactide), poly(D,L-lactide) and poly(e-caprolactone). Journal of applied polymer science, 109, 3376-3381. DOI
Nalawade, S.P., D. Westerman, G. Leeke, R.C.D. Santos, Grijpma, D.W. & Feijen, J. (2008). Preparation of porous poly(trimethylene carbonate) structures for controlled release applications using high pressure CO2 . Journal of controlled release, 132, e73-e75. DOI
Nijhuis, E.H.A., Poot, A.A., Feijen, J. & Vermes, I. (2008). Hsp70- and p53-responses after heat treatment and/or X-radiation mediate the susceptibility of hematopoietic cells to undergo apoptosis. International journal of radiation biology, 84, 99-105. DOI
Nijhuis, E.H.A., Gac, S. le, Poot, A.A., Feijen, J. & Vermes, I. (2008). Bax-mediated mitochondrial membrane permeabilization after heat treatment in caspase-2 dependent. International journal of hyperthermia, 24, 357-365. DOI
Papenburg, B.J., Schuller, S., Stamatialis, D., Grijpma, D.W., Boer, J. de, Blitterswijk, C.A. van & Wessling, M. (2008). Flexible micropatterned porous scaffolds. Tissue Engineering Part A, 14, 855. DOI
Piest, M., Lin, C., Mateos timoneda, M.A., Lok, M.C., Hennink, W.E., Feijen, J. & Engbersen, J.F.J. (2008). Novel poly(amido amine)s with bioreducible disulfide linkages in their diamino-units: structure effects and in vitro gene transfer properties. Journal of controlled release, 132, e12-e13. DOI
Piest, M., Lin, C., Mateos timoneda, M.A., Lok, M.C., Hennink, W.E., Feijen, J. & Engbersen, J.F.J. (2008). Novel poly(amido amine)s with bioreducible disulfide linkages in their diamino-units: structure effects and in vitro gene transfer properties. Journal of controlled release, 130(1), 38-45. DOI
Song, Y., Kamphuis, M.M.J., Zhang Zheng, Z.Z., Vermes, I., Poot, A.A., Grijpma, D.W. & Feijen, J. (2008). Poly(trimethylene carbonate)-based porous tubular structures for tissue engineering of small diameter blood vessels. Tissue Engineering Part A, 14, 927. DOI
Song, Y., Yang, L., Jansen, J., Kamphuis, M.M.J., Zhang Zheng, Z.Z., Poot, A.A., Vermes, I., Grijpma, D.W. & Feijen, J. (2008). Poly(trimethylene carbonate) porous tubular structures made by electro-spinning. Journal of controlled release,132, e79-e80. DOI
Valero, A., Post, J.N., Nieuwkasteele, J.W. van, Braak, P.M. ter, Kruijer, W. & Berg, A. van den (2008). Gene transfer and protein dynamics in stem cells using single cell electroporation in a microfluidic device. Lab on a chip, 8(1), 62-67. DOI
Velthoen, I.W., Tijsma, E.J., Dijkstra, P.J. & Feijen, J. (2008). Thermo-responsive hydrogels based on branched poly(L-lactide)-poly(ethylene glycol) copolymers. Macromolecular symposia, 272, 13-27. DOI
Vos, S.V.N. de, Feijen, J. & Grijpma, D.W. (2008). Poly(1,3-trimethylene carbonate) networks as a resorbable scleral buckle. Journal of controlled release, 132, e51-e52. DOI
Yang, Lanti, Fitié, C.F.C., Werf, K.O. van der, Bennink, M.L., Dijkstra, P.J. & Feijen, J. (2008). Mechanical properties of single electrospun collagen type I fibers. Biomaterials, 29, 955-962. DOI
Yang, Lanti, Werf, K.O. van der, Fitie, C.F.C., Bennink, M.L., Dijkstra, P.J. & Feijen, J. (2008). Mechanical properties of native and cross-linked type I collagen fibrils. Biophysical journal, 94, 2204-2211. DOI
Zhang Zheng, Z.Z., Buwalda, S.J., Dijkstra, P.J., Grijpma, D.W., Poot, A.A., Steenbergen, W. & Feijen, J. (2008). Polymeric systems for delivery of growth factors to stimulate angiogenesis in tissue engineering. Journal of controlled release, 132, e52-e53. DOI
Zhou W., & Feijen, J. (2008).Biodegradable polymersomes for controlled drug release. Journal of controlled release, 132, e35-e36. DOI
Zuiderduin, W.C.J. & Gaymans, R.J. (2008). Polycarbonate modified with crystallisable bis-ester tetra-amide units in a reaction extrusion process. Reactive and functional polymers, 68(2), 527-534. DOI
2007
Araichimani, A., Baack, K.K.J. & Gaymans, R.J. (2007). Polyurethane triblock copolymers based on monodisperse amide segments synthesis, mechanical rheological properties. Polymer preprints, 48(1), 483-484.
Araichimani, A. & Gaymans, R.J. (2007). Tri-block copolymers based on monodisperse aramide segments-synthesis, mechanical and rheological properties. Polymer preprints, 48(1), 856-857.
Biemond, G.J.E., Feijen, J. & Gaymans, R.J. (2007). Poly(ether amide) segmented block copolymers with adipicacid based tetra amide segments. Journal of applied polymer science, 105(2), 951-963.
Breteler, M.R. ten, Zhong, Z., Dijkstra, P.J., Palmans, A.R.A., Peeters, J. & Feijen, J. (2007). Ring-opening polymerization of substituted e-caprolactones with chiral (salen) AIOiPr complex. Journal of polymer science, part A, 45(3), 429-436.
Christensen, L., Chang, C.W., Yockman, J.W., Conners, R., Jackson, H., Zhong, Z., Feijen, J., Bull, D.A. & Kim, S.W. (2007). Reducible poly(amido ethylenediamine) for hypoxia-inducible VEGF delivery. Journal of controlled release, 118, 254-261.
Claase, M.B., Bruijn, J.D. de, Grijpma, D.W. & Feijen, J. (2007). Ectopic bone formation in cell-seeded poly(ethylene oxide)/poly(butylene terephtalate) copolymer scaffolds of varying porosity. Journal of materials science. Materials in medicine, 18, 1299-1307.
De, D. & Gaymans, R.J. (2007). Polyurethanes with diamine-diamine chain extender. Polymer preprints, 48(1), 485-486.
Du, H(ongzhi), Pang, X., Chen, X., Wang, Xianhong & Jing, X. (2007). Enolic schiff-base aluminium complexes and their application in lactide polymerization. Journal of organometallic chemistry, 692, 5605-5613.
Du, H(ongzhi), Pang, X., Yu, H., Zhuang, X., Chen, X., Cui, D., Wang, Xianhong & Jing, X. (2007). Polymerization of rac-lactide using schiff base aluminum catalysts: structure, activity and stereoselectivity. Macromolecules, 692, 5605-5613.
Everaerts, F., Torriani, M., Hendriks, M. & Feijen, J. (2007). Quantification of carboxyl groups in carbodiimide cross-linked collagen sponges. Journal of biomedical materials research. Part A, 83(4), 1176-1183.
Hiemstra, C., Zhong, Z., Tomme, S.R. van, Steenbergen, M. van, Jacobs, J.J.L., Otter, W. den, Hennink, W.E. & Feijen, J. (2007). In vitro in vivo protein delivery from in situ forming poly(ethylene glycol)-poly(lactide) hydrogels. Journal of controlled release, 119, 320-327.
Hiemstra, C., Aa, L.J. van der, Zhong, Z., Dijkstra, P.J. & Feijen, J. (2007). Novel in situ forming, degradable dextran hydrogels by michael addition chemistry: synthesis, rheology, and degradation. Macromolecules, 40, 1165-1173.
Hiemstra, C., Zhou, W., Zhong, Z., Wouters, M. & Feijen, J. (2007). Rapidly in situ forming biodegradable robust hydrogels by combining stereocomplexation and photopolymerization. Journal of the American Chemical Society, 129, 9918-9926.
Hiemstra, C., Aa, L.J. van der, Zhong, Z., Dijkstra, P.J. & Feijen, J. (2007). Rapidly in situ-forming degradable hydrogels from dextran thiols through michael addition. Biomacromolecules, 8, 1548-1556.
Hiemstra, C., Zhong, Z., Steenbergen, M.J. van, Hennink, W.E. & Feijen, J. (2007). Release of model proteins and basic fibroblast growth factor from in situ forming degradable dextran hydrogels. Journal of controlled release, 122(1), 71-78.
Husken, D., Feijen, J. & Gaymans, R.J. (2007). Hydrophilic segmented block copolymers based on poly(ethylene oxide) and monodisperse amide segments. Journal of polymer science, part A, 45(19), 4522-4535.
Husken, D., Feijen, J., Visser, T., Wessling, M. & Gaymans, R.J. (2007). Influence of hydrophilicity of segmented block copolymers on vapor transport behavior. Polymer preprints, 48(1), 404-405.
Jeong, J.H., Christensen, L., Yockman, J.W., Zhong, Z., Engbersen, J.F.J., Kim, W.J., Feijen, J. & Kim, S.W. (2007). Reducible poly(amido ethylenimine) directed to enhance RNA interference. Biomaterials, 28, 1912-1917.
Jin, R., Hiemstra, C., Zhong, Z. & Feijen, J. (2007). Enzyme-mediated in situ formation for hydrogels form dextran-tyramine conjugates. Biomaterials, 18, 2791-2800.
Krijgsman, J., Biemond, G.J.E., Stephen, R. & Gaymans, R.J. (2007). High Tg segmented copolymers with monodisperse crystallisable segments. Polymer preprints, 48(1), 418-419.
Krijgsman, J., Biemond, G.J.E. & Gaymans, R.J. (2007). Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide) by direct coupling. Journal of applied polymer science, 103, 512-518.
Leeuwen, S.M. van, Tan, B.H., Grijpma, D.W., Feijen, J. & Karst, U. (2007). Characterization of the chemical composition of a block copolymer by liquid chromotography/mass spectroscopy using atomspheric pressure chemical ionization and electrospray ionization. Rapid communications in mass spectrometry, 21, 2629-2637.
Li, L., Meng, F., Zhong, Z., Byelov, B., Jeu, W. de & Feijen, J. (2007). Morphology of a highly asymmetric double crystallizable poly(e-caprolactone-b-ethylene oxide) block copolymer. Journal of chemical physics, 126, 024904.
Lin, C., Zhong, Z., Lok, M.C., Jiang, X., Hennink, W.E., Feijen, J. & Engbersen, J.F.J. (2007). Random and block copolymers of bioreducible poly(amido amine)s with high- and low-basicity amino groups: study of DNA condensation and buffer capacity on gene transfection. Journal of controlled release, 123, 67-75.
Roerdink, M., Zanten, T.S. van, Hempenius, M.A., Zhong, Z., Feijen, J. & Vancso, G.J. (2007). Poly(ferrocenylsilane)-block-Polylactide Block Copolymers. Macromolecular rapid communications, 28, 2125-2130.
Rusmini, F., Zhong, Z. & Feijen, J. (2007). Protein immobilization strategies for protein biochips. Biomacromolecules, 8(16), 1775-1789.
Schuur, J.M. van der & Gaymans, R.J. (2007). Influence of liquid-liquid demixed vs crystalline morphology on the properties of segmented block copolymers. Polymer preprints, 48(1), 829-830.
Schuur, J.M. van der & Gaymans, R.J. (2007). Influence of morphology on the properties of segmented block copolymers. Polymer, 48(7), 1998-2006.
Song, Y., Weekamp, H.H., Kamphuis, M.M.J., Zhang, Z., Vermes, I., Poot, A.A., Grijpma, D.W. & Feijen, J. (2007). Porous tubular scaffolds based on flexible and elastic TMC (co)polymers. Tissue engineering, 13(7), 1745-1745.
Verdijk, R., Franke, H.R., Wolbers, F. & Vermes, I. (2007). Differential effects of biphosphonates on breast cancer cell lines. Cancer letters, 246, 308-312.
Vrouwe, E.X., Lüttge, R., Vermes, I. & Berg, A. van den (2007). Microchip capillary electrophoresis for point-of-care analysis of lithium. Clinical chemistry, 53(1), 117-123.
Yang, Lanti, Werf, K.O. van der, Koopman, H.F.J.M., Subramaniam, V., Bennink, M.L., Dijkstra, P.J. & Feijen, J. (2007). Micromechanical bending of single collagen firils using atomic force microscopy. Journal of biomedical materials research. Part A, 82A, 160-168.
Yang, Lanti, Werf, K.O. van der, Bennink, M.L., Dijkstra, P.J. & Feijen, J. (2007). Viscoelastic behavior of individual collagen fibrils tested by AFM. Tissue engineering, 13, 1777-1777.
Zuiderduin, W.C.J., Huetink, J. & Gaymans, R.J. (2007). Pre-yield tensile set of a semi-crystalline polymer, its blend and composite. Journal of materials science, 42, 4131-4135.
2006
Buttafoco, L.; Kolkman, N.G.; Engbers-Buijtenhuijs, P.; Poot, A.A.; Dijkstra, P.J.; Vermes, I.; Feijen, J. (2006)Electrospinning of collagen and elastin for tissue engineering applications. Biomaterials; vol. 27, 724-734
Christensen, L.V.; Chang, C.-W.; Kim, W.J.; Kim, S.W.; Zhong, Z.; Lin, C.; Engbersen, J.F.J.; Feijen, J. (2006) Reducible Poly(amido ethylenimine)s Designed for Triggered Intracellular Gene Delivery. Bioconjugate chemistry; vol. 17 (2006, 1233-1240
Nijhuis, E.H.A.; Poot, A.A.; Feijen, J.; Vermes, I. (2006) Induction of apoptosis by heat and gamma;-radiation in a human lymphoid cell line; role of mitochondrial changes and caspase activation. International journal of hyperthermia; vol. 22 , 687-698
Hiemstra, C.; Zhong, Z.Y.; Van Tomme, S.R.; Hennink, W.E.; Dijkstra, P.J.; Feijen, J. (2006) Protein release from injectable stereocomplexed hydrogels based on PEG–PDLA and PEG–PLLA star block copolymers. Journal of controlled release; vol. 116, e19
Hiemstra, C.; Zhong, Z.Y.; Jiang, X.; Hennink, W.E.; Dijkstra, P.J.; Feijen, J. (2006) PEG–PLLA and PEG–PDLA multiblock copolymers : Synthesis and in situ hydrogel formation by stereocomplexation. Journal of controlled release; vol. 116, e17
Melchels, F.P.W.; Grijpma, D.W.; Feijen, J.; Photo-crosslinking of functionalised lactide oligomers for the fabrication of osteochondral tissue engineering scaffolds. Journal of controlled release; vol. 116; e98
Nalawade, S.P.; Picchioni, F.; Marsman, J.H.; Grijpma, D.W.; Feijen, J.; Janssen, L.P.B.M. (2006) Intermolecular interactions between carbon dioxide and the carbonyl groups of polylactides and poly(ε-caprolactone). Journal of controlled release; vol. 116, e38
Zhang, Z.; Grijpma, D.W.; Feijen, J. (2006) Thermoplastic elastomers based on poly(lactide)–poly(trimethylene carbonate-co-caprolactone)–poly(lactide) triblock copolymers and their stereocomplexes. Journal of controlled release; vol. 116, e29
Zhang, Z.; Grijpma, D.W.; Feijen, J. (2006) Trimethylene carbonate-based polymers for controlled drug delivery applications. Journal of controlled release; vol. 116, e28
Zhong, Z.Y.; Lin, C.; Ma, Y.; Hempenius, M.A.; Lok, M.C.; Fretz, M.M.; Engbersen, J.F.J.; Vancso, G.J.; Hennink, W.E. (2006) Water-soluble cationic poly(ferrocenylsilane): An efficient DNA condensation and transfection agent. Journal of controlled release; vol. 116 e81
Zhou, W.; Meng, F.; Engbers, G.H.M.; Feijen, J. (2006) Biodegradable polymersomes for targeted ultrasound imaging. Journal of controlled release; vol. 116, e62
Leemhuis, M.; Nostrum, C.F. van; Kruijtzer, J.A.W.; Zhong, Z.Y.; Breteler, M.R. ten; Dijkstra, P.J.; Feijen, J.; Hennink, W.E. (2006) Functionalized Poly(α-hydroxy acid)s via Ring-Opening Polymerization: Toward Hydrophilic Polyesters with Pendant Hydroxyl Groups. Macromolecules; vol. 39, 3500-3508
2005
Dijkstra, P.J., Engbers, G.H.M., Poot, A.A., Grijpma, D.W. and Zhong, Z. (2005).Bone tissue engineering on amorphous carbonated apatite and crystalline octacalcium phosphate-coated titanium discs. Biomaterials, 26, 5231-5239.
Professor Jan Feijen - 30 years research in biomedical technology.Journal of controlled release, 109(1-3), 2-4.
Engbers-Buijtenhuijs, P., Kamphuis, M.M.J., Sluijs veer, G. van der, Haanen, C., Poot, A.A., Feijen, J. and Vermes, I. (2005). A novel time resolved fl uorometric assay of anoikis using Europium-labelled annexin V in cultured adherent cells. Apoptosis, 10(2), 429-437.
Engbers-Buijtenhuijs, P., Buttafoco, L., Poot, A.A., Geelkerken, R.H., Feijen, J. and Vermes, I. (2005). Analysis of the balance between proliferation and apoptosis of cultured vascular smooth muscle cells for tissue-engineering applications. Tissue engineering, 11(11/12), 1631-1639.
Feng, C., Zhang, Z., Förch, R., Knoll, W., Vancso, G.J. and Schönherr, H. (2005).Reactive Thin Polymer Films as Platforms for the Immobilization of Biomolecules. Biomacromolecules, 6, 3243-3251.
Gaymans, R.J. and Zuiderduin, W.C.J. (2005). Toughening with rigid particles. Polymeric materials science and engineering, 93, 917-918.
Grijpma, D.W., Hou, Q. and Feijen, J. (2005). Preparation of biodegradable networks by photo-crosslinking lactide, e-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester. Biomaterials, 26(16), 2795-2802.
Husken, D., Feijen, J. and Gaymans, R.J. (2005). Microenvironment as essential element of osteoinduction by biomaterials. Biomaterials, 26(17), 3565-3575.
Krijgsman, J. and Gaymans, R.J. (2005). Influence of hydrophilicity of segmented block copolymers on vapor transport behavior. Polymeric materials science and engineering, 93, 334-335.
Segmented copolymers of poly(phenylene ether) and polyester. Polymer, 46(16), 6122-6127.
Krijgsman, J., Biemond, G.J.E. and Gaymans, R.J. (2005). Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide). Part 4. Infl uence of the extender. Polymer, 46(19), 8250-8257.
Lips, P.A.M., Velthoen, I.W., Dijkstra, P.J., Wessling, M. and Feijen, J. (2005). Erratum - Gas foaming of segmented poly(ester amide) films. Polymer, 46, 12737-12737.
Lips, P.A.M., Velthoen, I.W., Dijkstra, P.J., Wessling, M. and Feijen, J. (2005).Gas foaming of segmented poly(ester amide) films. Polymer, 46, 9396-9403.
Lips, P.A.M., Broos, R., Heeringen, M.J.M. van, Dijkstra, P.J. and Feijen, J. (2005).Incorporation of different crystallizable amide blocks in segmented poly(ester amide)s. Polymer, 46, 7834-7842.
Lips, P.A.M., Broos, R., Heeringen, M.J.M. van, Dijkstra, P.J. and Feijen, J. (2005). Synthesis and characterization of poly(ester amide)s containing crystallizable amide segments. Polymer, 46, 7823-7833.
Schuur, J.M. van der and Gaymans, R.J. (2005). Infl uence of chemical crosslinks on the elastic behavior of segmented block copolymers. Polymer, 46(18), 6862-6868.
Schuur, J.M. van der), Boer, J. de and Gaymans, R.J. (2005). Structure-property relations of poly(propylene oxide) block copolymers with monodisperse and polydisperse crystallisable segments. Polymer, 46(22), 9243-9256.
Schuur, J.M. van der, Heide, E. van der, Feijen, J. and Gaymans, R.J. (2005).Structure-property relations of segmented block copolymers with liquid liquid demixed morphologies. Polymer, 46(11), 3616-3627.
Schuur, J.M. van der, Feijen, J. and Gaymans, R.J. (2005).Synthesis and characterization of bisester-amide segments of uniform and random length. Polymer, 46(13), 4584-4595.
Schuur, J.M. van der, Feijen, J. and Gaymans, R.J. (2005). Synthesis of polyether-based block copolymers based on poly(propylene oxide) and terephthalates. Polymer, 46(2), 327-334.
Tan, B.H., Grijpma, D.W., Nabuurs, T. and Feijen, J. (2005). Crosslinkable surfactants based on linoleic acid-functionalized block copolymers of ethylene oxide and e-caprolactone for the preparation of stable PMMA latices. Polymer, 46(4), 1347-1357.
Vleggeert-Lankamp, C.L.A.M., Ruiter, G.W.C. de, Wolfs, J.F.C., Pêgo, A.P., Feirabend, H.K.P., Lakke, E.A.J.F. and Malessy, M.J.A. (2005). Type grouping in skeletal muscles after experimental reinnervation: another explanation. European journal of neuroscience, 21, 1249-1256.
Zhang, Z., Zou, S., Vancso, G.J., Grijpma, D.W. and Feijen, J. (2005). Enzymatic Surface Erosion of Poly(trimethylene carbonate) Films Studied by Atomic Force Microscopy. Biomacromolecules, 6, 3404-3409.
Zhong, Z., Song, Y., Engbersen, J.F.J., Lok, M.C., Hennink, W.E. and Feijen, J. (2005).A versatile family of degradable non-viral gene carriers based on hyperbranched oly(ester amine)s. Journal of controlled release, 109(1-3), 317-329.
Zhong, Z., Feijen, J., Lok, M.C., Hennink, W.E., Christensen, L., Yockman, J.W., Kim, Y.-H and Kim, S.W. (2005). Low molecular weight linear polyethylenimine-b-poly(ethylene glycol)-b-polyethylenimine triblock copolymers: synthesis, haracterization, and in vitro gene transfer properties. Biomacromolecules, 6(6), 3440-3448.
Zuiderduin, W.C.J., Homminga, D.S., Huétink, J. and Gaymans, R.J. (2005). Infl uence of copolymerisation on fracture behaviour of aliphatic polyketones. Polymer, 46(11), 1921-1934.
Zuiderduin, W.C.J., Huétink, J., Vlasveld, D.P.N. and Gaymans, R.J. (2005).Infl uence of sample thickness on fracture behaviour of polyketone and a polyketone-rubber blend. Polymer, 46(23), 10321-10330.
2004
Altpeter, H., Bevis, M.J., Grijpma, D.W. and Feijen, J. (2004). Non-conventional injection molding of poly(lactide) and poly(e-caprolactone) intended for orthopedic applications. Journal of materials science. Materials in medicine 15, 175-184.
Becker, G., Niemeyer, M., Mundt, O., Schwarz, W., Westerhausen, M., Ossberger, M.W., Mayer, P., Nöth, H., Zhong, Z., Dijkstra, P.J. and Feijen, J. (2004). Crystal structures and spectroscopic properties of 2 l3 phospha-1,3-dionates and 1,3-dionates of calcium - comparative studies on the 1,3-diphenyl- and 1,3-Di(tertbutyl)derivatives. Zeitschrift für anorganische und allgemeine Chemie 630, 2605-2621.
Buijtenhuijs, P., Buttafoco, L., Poot, A.A., Dijkstra, P.J., Vos, R.A.I. de, Sterk, L.M.Th., Geelkerken, R.H., Feijen, J. and Vermes, I. (2004). Tissue engineering of blood vessels: characterisation of smooth muscle cells for culturing on collagen and elastin based scaffolds. Biotechnology and applied biochemistry 39, 141-149.
Deschamps, A.A., Apeldoorn, A.A. van, Hayen, H., Bruijn, J.D. de, Karst, U., Grijpma, D.W. and Feijen, J. (2004). In vivo and in vitro degradation of poly(ether ester) block copolymers based on poly(ethylene glycol) and poly(butylene terephthalate. Biomaterials 25, 247-258.
Dijkhuizen-Radersma, R., Roosma, J.R., Kaim, P., Métairie, S., Péters, F.L.A.M.A., Wijn, J. de, Zijlstra, P.G., Groot, K. de and Bezemer, J.M.(2004). Biodegradable poly(ether-ester) multiblock copolymers for controlled release applications. Journal of biomedical materials research 71A (1), 118-127.
Dijkhuizen-Radersma, R., Wright, S.J., Taylor, R.M., John, B.A., Groot, K. de and Bezemer, J.M. (2004). In vitro/in vivo correlation for 14C-methylated lysozyme release from poly(ether-ester) microspheres. Pharmaceutical research 21 (3), 484-491.
Hayen, H., Deschamps, A.A., Grijpma, D.W., Feijen, J. and Karst, U. (2004). Liquid chromatographic-mass spectrometric studies on the in vitro degradation of a poly(ether ester) block copolymer. Journal of chromatography A 1029, 29-36.
Husken, D., Krijgsman, J. and Gaymans, R.J. (2004). Segmented blockcopolymers with uniform amide segments. Polymer 45, 4837-4843.
Krijgsman, J. and Gaymans, R.J. (2003). Copolymers of poly(2,6-dimethyl-1,4-phenylene ether) and ester units. Polymer 44, 7589-7599.
Krijgsman, J., Feijen, J. and Gaymans, R.J. (2004). Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide): 2. Crystallisation behaviour. Polymer 45, 4685-4691.
Krijgsman, J.,Feijen, J. and Gaymans, R.J. (2004). Segmented copolymers of uniform tetra-amide units and poly(phenyllene oxide): 1. Synthesis and thermal-mechanical properties. Polymer 45, 4677-4684.
Li, L., Zhong, Z., Jeu, W. de, Dijkstra, P.J. and Feijen, J. (2004). Crystal structure and morphology of poly(L-lactide-b-D-lactide)diblock copolymers. Macromolecules 37, 8641-8646.
Meng, F., Engbers, G.H.M., Gessner, A., Müller, R.H. and Feijen, J. (2004). Pegylated polystyrene particles as a model system for artificial cells. Journal of biomedical materials research 70A (1), 97-106.
Meng, F., Engbers, G.H.M. and Feijen, J. (2004). Polyethylene glycol-grafted polystyrene particles. Journal of biomedical materials research 70A (1), 49-58.
Signori, F., Lips, P.A.M., Dijkstra, P.J., Feijen, J. and Chiellini, E. (2004). Segmented multifunctional poly(ether ester) polymers containing H-bonding units. Preparation and charactization. Macromolecular chemistry and physics 205, 1299-1308.
PROGRESS REPORT 2004
Zhang, Z., Grijpma, D.W. and Feijen, J. (2004). Creep-resitant porous stuctures based on stereo-complex forming triblock copolymers of 1,3-trimethylene carbonate and lactides. Journal of materials science. Materials in medicine 15, 381-385.
Zhang, Z., Grijpma, D.W. and Feijen, J. (2004). Triblock copolymers based on 1,3-trimethylene carbonate and lactide as biodegradable thermoplastic elastomers. Macromolecular chemistry and physics 205, 867-875.
Zhong, Z., Dijkstra, P.J. and Feijen, J. (2004). Controlled synthesis of biodegradable lactide polymers and copolymers using novel in situ generated or single-site stereoselective polymerisation initiators. Journal of biomaterials science: polymer edition 15 (7), 929-946.
Zweers, M.L.T., Engbers, G.H.M., Grijpma, D.W. and Feijen, J. (2004). In vitro degradation of nanoparticles prepared from polymers based on DL-lactide, glycolide and poly(ethylene oxide). Journal of controlled release 100 (3), 347-356.
2003
Azevedo, M.C., Reis, R.L., Claase, M.B., Grijpma, D.W. and Feijen, J. (2003). Development and properties of polycaprolactone/hydroxyapatite composite biomaterials. Journal of materials science. Materials in medicine, 14, 103-107 .
Buttafoco, L., Dijkstra, P.J., Poot, A.A., Vermes, I. and Feijen, J. (2003). Collagenous porous structures for the development of an artificial small diameter blood vessel. Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87. Journal of controlled release (pp. 295-297).
Claase, M.B., Olde riekerink, M.B., Bruijn, J.D. de, Grijpma, D.W., Engbers, G.H.M. and Feijen, J. (2003). Enhanced bone marrow stromal cell adhesion and growth on segmented poly(ether ester)s based on poly(ethylene oxide) and poly(butylene terephthalate).Biomacromolecules, 4(1), 57-63, issn. 1525-7797.
Claase, M.B., Grijpma, D.W., Mendes, S.C., Bruijn, J.D. de and Feijen, J. (2003). Porous PEOT/PBT scaffolds for bone tissue engineering: preparation, characterization, and in vitro bone marrow cell culturing. Journal of biomedical materials research, 64a(2), 291-300.
Claase, M.B., Olde riekerink, M.B., Grijpma, D.W., Feijen, J., Mendes, S.C. and Bruijn, J.D. de (2003). Surface modification of PEOT/PBT copolymers for the improvement of bone marrow stromal cell attachment. Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87. Journal of controlled release (pp. 298-301).
Daamen, F., Moerkerk, H. van, Hafmans, T., Buttafoco, L., Poot, A.A., Veerkamp, J.H. and Kuppevelt, T.H. van (2003). Preparation and evaluation of molecularly-defined collagen-elastinglycosaminoglycan scaffolds for tissue engineering. Biomaterials, 24, 4001-4009.
Deschamps, A.A., Apeldoorn, A.A. van, Bruijn, J.D. de, Grijpma, D.W. and Feijen, J. (2003). Poly(ether ester amide)s for tissue engineering. Biomaterials, 24, 2643-2652.
Deschamps, A.A., Grijpma, D.W. and Feijen, J. (2003). Segmented poly(ether ester amide) copolymers as scaffolds for tissue engineering. Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87. Journal of controlled release (pp. 302-303).
Gottenbos, B., Mei, H.C. van der, Klatter, F., Grijpma, D.W., Feijen, J., Nieuwenhuis, P. and Busscher, H.J. (2003). Positively charged biomaterials exert antimicrobial effects of gram-negative bacilli in rats. Biomaterials, 24, 2707-2710.
Groenewoud, L.M.H., Engbers, G.H.M. and Feijen, J. (2003). Plasma polymerization of thiophene derivatives. Langmuir, 19, 1368-1374.
Hou, Q., Grijpma, D.W. and Feijen, J. (2003). Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique.Biomaterials, 24, 1937-1947.
Hou, Q., Grijpma, D.W. and Feijen, J. (2003). Preparation of interconnected highly porous polymeric structures by a replication and freeze-drying process. Journal of biomedical materials research, 67B(2), 732-740.
Hou, Q., Grijpma, D.W. and Feijen, J. (2003). Preparation of interconnected highly porous (D,L-lactide) structures by sugar templating and freezedrying. Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87. Journal of controlled release (pp. 304-306).
Krijgsman, J., Husken, D. and Gaymans, R.J. (2003). Melt spinnable elastane (spandex) fibers from segmented copolyetheresteramides (part 2). Chemical fibers international, 53, 176-178.
Krijgsman, J., Husken, D., Feijen, J. and Gaymans, R.J. (2003). Synthesis and characterisation of uniform bisester tetra-amide segments. Polymer, 44, 7043-7053.
Krijgsman, J., Feijen, J. and Gaymans, R.J. (2003). Synthesis and properties of poly(2,6-dimethyl-1,4-phylene ether), dodecanediol and uniform tetra-amide units. Macromolecular symposia, 199, 135-146.
Krijgsman, J., Husken, D. and Gaymans, R.J. (2003). Synthesis and properties of thermoplastic elastomers based on PTMO and tetra-amide. Polymer, 44, 7573-7588.
Mendes, S.C., Bezemer, J.M., Claase, M.B., Grijpma, D.W., Bellia, G., Degli-Innocenti, F., Reis, R.L., Groot, K. de, Blitterswijk, C.A. van and Bruijn, J.D. de (2003). Evaluation of two biodegradable polymeric systems as substrates for bone tissue engineering. Tissue engineering, 9(1), S91-S102.
Meng, F., Engbers, G.H.M. and Feijen, J. (2003). Preparation and in vitro evaluation of polyethylene glycol modified microspheres. Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87. Journal of controlled release (pp. 243-245).
Meng, F., Hiemstra, C., Engbers, G.H.M. and Feijen, J. (2003). Biodegradable polymersomes.Macromolecules, 36, 3004-3006.
Olde riekerink, M.B., Claase, M.B., Engbers, G.H.M., Grijpma, D.W. and Feijen, J. (2003). Gas plasma etching of PEO/PBT segmented block copolymer films. Journal of biomedical materials research, 65A(4), 417-428.
Pêgo, A.P., Vleggeert-lankamp, C.L.A.M., Deenen, M., Lakke, E.A.J.F., Grijpma, D.W., Poot, A.A., Marani, E. and Feijen, J. (2003). Adhesion and growth of human schwann cells on trimethylene carbonate (co)polymers. Journal of biomedical materials research, 67a, 876-885.
Pêgo, A.P., Poot, A.A., Grijpma, D.W. and Feijen, J. (2003). Biodegradable elastomeric scaffolds for soft tissue engineering. Journal of controlled release, 87, 69-79.
Pêgo, A.P., Grijpma, D.W. and Feijen, J. (2003). Enhanced mechanical properties of 1,3-trimethylene carbonate polymers and networks. Polymer, 44, 6495-6504.
Pêgo, A.P., Luyn, M.J.A. van, Brouwer, L.A., Wachem, P.B. van, Poot, A.A. and Grijpma, D.W. (2003). In vivo behavior of poly(1,3-trimethylene carbonate) and copolymers of 1,3-trimethylene carbonate with D,L-lactide or e-caprolactone: degradation and tissue response. Journal of biomedical materials research, 67A(3), 1044-1054.
Pêgo, A.P., Zhong, Z., Dijkstra, P.J., Grijpma, D.W. and Feijen, J. (2003). Influence of catalyst and polymerization conditions on the properties of 1,3-trimethylene carbonate and e-caprolactone copolymers. Macromolecular chemistry and physics, 204(5-6), 747-754.
Pêgo, A.P., Poot, A.A., Grijpma, D.W. and Feijen, J. (2003). Physical properties of high molecular weight 1,3-trimethylene carbonate and D,Llactide copolymers. Journal of materials science. Materials in medicine, 14, 767-773.
Pêgo, A.P., Siebum, B., Luyn, M.J.A. van, Gallego y Van Seijen, X.J., Poot, A.A., Grijpma, D.W. and Feijen, J. (2003). Preparation of degradable porous structures based on 1,3-trimethylene carbonate and D,Llactide (co)polymers for heart tissue engineering. Tissue engineering, 9(5), 981-994.
Signori, F., Solaro, R., Chiellini, E., Lips, P.A.M., Dijkstra, P.J. and Feijen, J. (2003). Multifunctional polyesters as new candidate materials for biomedical applications. Synthesis and structural characterization. Macromolecular symposia, 197, 289-301.
Signori, F., Solaro, R., Chiellini, E., Lips, P.A.M., Dijkstra, P.J. and Feijen, J. (2003). Synthesis and characterization of segmented poly(ether ester)s containing H bonding units. Macromolecular chemistry and physics, 204(16), 1971-1981.
Signori, F., Fiumi, C, Bizzarri, R., Chiellini, E., Solaro, R. and Chiellini, F. (2003). Nanospheres from amphiphilic graft copolymers for targeted protein release. Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87. Journal of controlled release (pp. 246-250).
Westerhausen, M., Schneiderbauer, S., Kneifel, A.N., Söltl, Y., Mayer, P., Nöth, H., Zhong, Z., Dijkstra, P.J. and Feijen, J. (2003). Organocalcium compounds with catalytic activity for the ring-opening polymerization of lactones. European journal of inorganic chemistry, 18, 3432-3439.
Zhong, Z., Dijkstra, P.J. and Feijen, J. (2003). Controlled and stereoselective polymerization of lactide: kinetics, selectivity and microstructures. Journal of the American Chemical Society, 125, 11291-11298.
Zhong, Z., Dijkstra, P.J. and Feijen, J. (2003). Determination of the stereoselectivity factor for an asymmetric enantiomerdifferentiating polymerization: a revisit. Macromolecules, 36, 8198-8200.
Zhong, Z., Schneiderbauer, S., Dijkstra, P.J., Westerhausen, M. and Feijen, J. (2003). Single-site calcium initiators for the controlled ringopening polymerization of lactides and lactones. Polymer bulletin, 51, 175-182.
Zijpp, Y.J.T. van der, Poot, A.A. and Feijen, J. (2003). ICAM-1 and VCAM-1 expression by endothelial cells grown on fibronectin-coated TCPS and PS. Journal of biomedical materials research, 65A(1), 51-59.
Zuiderduin, W.C.J., Homminga, D.S., Huetink, J. and Gaymans, R.J. (2003). Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer, 44, 6361-6370.
Zuiderduin, W.C.J., Westzaan, C., Huetink, J. and Gaymans, R.J. (2003). Thoughening of polypropylene with calcium carbonate particles. Polymer, 44, 261-275.
Zweers, M.L.T., Grijpma, D.W., Engbers, G.H.M. and Feijen, J. (2003). The preparation of monodisperse biodegradable polyester nanoparticles with a controlled size. Journal of biomedical materials research, 66B(2), 559-566.
Zweers, M.L.T., Grijpma, D.W., Engbers, G.H.M. and Feijen, J. (2003). Biodegradable nanoparticles for local drug delivery. In Feijen, J. Prof.dr. and Sam, A.P. Dr. (Ed.), Proceedings of the Seventh European Symposium on Controlled Drug Delivery. Vol. 87.Journal of controlled release (pp.252-254).
