Mark ten Dam – Imtech (September 2013 – July 2014)
Imtech observes an increasing business potential in supporting its customers during the complete life cycle of the delivered assets. However, this is possible when two requirements are met:
Figure 1 HNLMS Johan de With and its propulsion system.
To meet these two requirements, methods and models must be developed that predict the failure behavior of typical (sub)systems for a given usage profile. Using these models, different maintenance strategies or scenarios can be compared in terms of performance, costs and benefits. Based on these results, Imtech will be able to propose the most optimal strategy to the asset owner. In addition to designing the initial maintenance strategy, the method will also enable the validation and, if required, modification of the maintenance strategy during the life cycle of the assets. The latter requires the derivation of a limited number of representative key performance indications (KPI).
Figure 2 Model for maintenance policy selection.
Figure 3 Seal geometry and corresponding Finite Element model.
Figure 4 Predicted wear of seal.