Skip to main content
MS3 Department
Faculties
ET
Departments
MS3
Facilities: MechLab
Find equipment (AZ/by group)
Experiments ordered by Research group
Experiments ordered by Research group
Elastomer Technology and Engineering
Elastomer Technology and Engineering
Internel mixer
Brabender® 350S measuring mixers are interchangeable measuring heads which, in connection with a Plasti-Corder® Lab-Station, serve for testing the processibility of thermoplastics, thermosets,
Liquid chromatograph, mass spectrometer
Liquid chromatography-mass spectrometry (LC-MS) is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography with the mass analysis capabilities of mass spectrometry.
Melting point apparatus
This instrument is designed for fast and accurate measurement of melting points. Easy setting of the desired start temperature and heating ramp rates.
Mooney Viscometer
The Mooney viscometer 2000 has been used especially in the rubber industry for more than 50 years. The MV 2000 from Alpha technoligies builds for Mooney viscosity measurement.
Oscillating Disc Rheometer
The Monsanto Rheometer 100S describe the curing and processing characteristics of vulcanizable elastomers. A sample sealed in a temperature controlled die cavity surrounds a rotor that oscillates at a frequency of 1.67 Hz (100 cpm).
Rubber process analyser
The Rubber Process Analyzer (RPA) is an advanced (dynamic mechanical rheological) test instrument, designed to measure the viscoelastic properties of polymers and rubber compounds before, during and after cure.
Tensile tester
Equipment is used for studying the stress-strain behaviour of materials like rubber and other polymers. Maximum work load in this equipment is 1 kN.
Thermo-gravimetric analyser
he Perkin-Elmer TGA-7 thermogravimetric analyzer measures the weight loss of samples upon heating. The samples can be heated in a nitrogen or an air atmosphere, the gas being selectable via manual mode.
Two-roll mill
Schwabenthan Two-roll milling is a relatively simple method for compounding additives into elastomeric (rubber) and certain thermoplastic materials, and for forming the resulting material into a thin sheet for subsequent moulding or testing.
Tribology
Production Technology
Production Technology
Jeol Neoscope JCM 5000
Leco AMH 43
Leica DMRX
Leica MZ 125
NanoSurf easyScan 2
VK 9700 Keyence
Biomechanical Engineering
Structural Dynamics and Acoustics
Structural Dynamics and Acoustics
Acoustic material testing
For characterization of acoustic material properties, such as the sound absorption coefficient, the reflection coefficient, the acoustic impedance and the transmission loss coefficient, it is possible to use the different range of impedance tubes in the laboratory of the SD&A group.
Experimental vibration research
For modelling or to analyze the dynamic behaviour of a structure, it is important to measure the dynamic characteristics of the structure. Experimental analysis is achieved by using a two or more channel Digital Signal Processing (DSP) system.
Close
Suggestions