MIRA University of Twente
Department of Biomechanical Engineering

Limpact: Modeling and control of a human arm powered exoskeleton (Carsten Voort)

 

Name:

H.C. Voort (Carsten)

Location:

Z 122

Project:

Limpact

Supervisors:

A. Otten, MSc (daily supervisor)

Prof. H. van der Kooij, PhD, MSc

A.H.A. Stienen, PhD, MSc

R.G.K.M. Aarts, PhD, MSc (external member)

Starting date:

01-11-2010

 

Presentations

27-01-2011

 

Limpact: Modeling and control of a human arm powered exoskeleton

Introduction

The Limpact is a multiple degree of freedom powered exoskeleton, which has four hydro-elastic actuators mounted on the actuated rotational degrees of freedom. It provides, combined with a supporting structure including passive degrees of freedom, a range of motion comparable to the human arm. This allows for full degree of freedom rehabilitation and diagnostics. In rehabilitation, the exoskeleton can for example be used to restore arm functionality of CVA patients when applied in a (virtual) training environment. In diagnostics, the exoskeleton could be used to identify, by disturbance, the passive joint stiffness and damping.

Objectives

·

Derive a dynamic model

·

Control the exoskeleton based on the dynamic model

Methods

To design control strategies for the exoskeleton, a dynamic model must be derived. The model will be derived using a dynamical modeling environment, like for example SPACAR or 20-sim. After that, specific control strategies will be designed starting with gravitational compensation on arbitrary paths. The control will be simulated and finally implemented on a real-time machine to actually control the exoskeleton.

Further information

If you are curious about the project status or want to know more about it, just come along and ask!